LevelOne FEP-0531 Manuel utilisateur

FEP-0531

User Manual

Brief introduction

Many thanks for purchasing Fast Ethernet POE Switch! This

product supports IEEE802.3U/100Base-Tx protocol, as well

as full duplex and half duplex mode. It provides 4 TX ports

and a UPLINK port, which can suit for most 10/100M

networks. This manual is for 100M converters.

Model

Specifications

5 x UTP

10/100M adaptive, with 4 PSE port

Packing list

Please check the following items in the package before

installing the converter.

Fast Ethernet POE Switch 1 piece

AC/DC adapter 1 piece

User manual 1 copy

Warranty card 1 piece

Please contact the dealer immediately for any missing or

damaged items.

Interface

1. Interface

All RJ-45 copper interfaces support Auto-Negotiation for

optimal speed detection through RJ-45 CAT5 UTP cables

with a maximum length of 100 meters (or 328 feet). They

also support standard Auto-MDI/MDI-X that can detect the

type of connection to any Ethernet device without requiring

special straight or crossover cables.

2. Connection

All ports support 802.3af compliant Power Devices (PD) and

other network devices (e.g. work station, hub or switch).

Connect one end of the standard UTP CAT5 network cable

to the 10/100Mbps RJ-45 ports on the front panel of the

switch. Connect the other of the cable to the typical network

devices.

Fig.1 Basic Network Connection

Panel

1. Front

2. Back

Explanation for LED indicator lamp

The LED indicator lamps serve as device monitoring and

error display. The following explains each LED indicator.

LED

Status

Explanation

PWR

Green

Lit when Power is available.

POE

(P1~P4)

Yellow

Lit when the connected port(s) is/are PSE

starts to supply power

OFF

Off when the connected port(s) is/are PSE

stop power supply

L/A

(P1~P4)

Green

Lit when there is/are network device(s)

connect the corresponding port(s)

Blink

Blink when the corresponding ports

is(are) transmitting data flows

Two

bits DIP

switch

Standard

Support 100 meters standard distance

transmission

Extend

Support 250 meters long distance

transmission

VLAN

Support 100M downlink port isolation,

only uplink port communication

VLAN

&Extend

Support 10M Port isolation and 250

meters long distance transmission

Installation

1. Turn off the power of the device/station in the network in

which the converter will be installed.

2. Ensure that there is no activity in the network.

3. Attach a UTP cable from the 100Base-TX network to the

RJ-45 port on the converter.

5. Connect the power cord to the converter.

6. Turn on the power of the converter and check that the

Power LED lights up. The TP Link and L/A Link LED

will light when all the cable connections are satisfactory.

7. When the P1~P5 LINK/ACT LED is green, the

corresponding port is running under 10/100Mbps;

Technical parameters:

1. Standard Protocol:

IEEE 802.3 10 Base-T

IEEE 802.3u 100Base-TX

IEEE 802.3x flow control

IEEE 802.3af POE

IEEE 802.3at POE+

2. Connectors:

5×UTP RJ-45 connector with PSE function

3. Operation mode:

TX: 10/100 Mbps auto-negotiation mode

4. Power supply:

[email protected] with 802.3af

[email protected] with 802.3at

5. PSE Pinout: PIN4/5: Pos(+), PIN7/8:Neg(-)

6. Operation temperature: -20℃~70 ℃

7. Storage temperature: -40℃~80 ℃

8. Operation humidity: 5%-90% non-condense

9. Storage humidity: 5%-90% non-condense

10. Twisted Pair cable: Cat5 UTP cable

11. Dimensions: 30×110.2×95.7mm (H x W x D)

Warning:

1. This product is suitable for indoor application.

2. The appliance inlet is used as the disconnect device and

shall remain readily operable at all time.

Trouble shooting:

1. Device is not connecting. Please check that the

corresponding network device is using the same transfer rate

as the media converter (10Mbps or 100Mbps).

Autres manuels LevelOne Changer

LevelOne

LevelOne GEL-2670 24 GE + 2 GE SFP Manuel utilisateur

LevelOne

LevelOne ViewCon KVM-0850 Manuel utilisateur

LevelOne

LevelOne GEU-2429 Manuel utilisateur

LevelOne

LevelOne IES-0842 Manuel utilisateur

LevelOne

LevelOne POH-0850TX Manuel utilisateur

LevelOne

LevelOne GEP-2682 Manuel utilisateur

LevelOne

LevelOne FEU-0812 Manuel utilisateur

LevelOne

LevelOne GEP-2841 Manuel utilisateur

LevelOne

LevelOne GSW-2473 Manuel utilisateur

LevelOne

LevelOne GEP-2652 Manuel utilisateur

LevelOne

LevelOne FEU-1610 Manuel utilisateur

LevelOne

LevelOne GTL-2880 Manuel utilisateur

LevelOne

LevelOne KVM-0221 Manuel utilisateur

LevelOne

LevelOne KVM-8916 Manuel utilisateur

LevelOne

LevelOne 55051007 Manuel utilisateur

LevelOne

LevelOne Infinity IES-0880 Manuel utilisateur

LevelOne

LevelOne GEP-1022 Manuel utilisateur

LevelOne

LevelOne GEP-5070 Manuel utilisateur

LevelOne

LevelOne GEP-2681 Manuel utilisateur

LevelOne

LevelOne IES-0610 V2 Manuel utilisateur

LevelOne

LevelOne ProCon GSW-4896 Manuel utilisateur

LevelOne

LevelOne FSW-1610TX Manuel utilisateur

LevelOne

LevelOne Infinity IES-1080 Manuel utilisateur

LevelOne

LevelOne IFP-0503 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur