Lenovo S2200 Manuel utilisateur

Lenovo Storage S2200 1

Lenovo Storage S2200

Lenovo Press Product Guide

The Lenovo® Storage S2200 (as shown in the following figure) provides simplicity, speed, scalability,

security, and high availability for small to large businesses. The S2200 SAN array delivers

enterprise-class storage management technology in an affordable solution with a wide choice of host

connectivity options, flexible drive configurations, and enhanced data management features.

The S2200 is a perfect fit for small offices and remote and branch offices of large enterprises that need a

primary storage solution that supports general purpose workloads, such as file and print serving, web

serving, email and collaboration, and small databases. The S2200 is also well-suited for secure archive

storage or a low-cost backup solution.

Figure 1. Lenovo Storage S2200

The S2200 offers the flexible choice of 6/12 Gb SAS, 1/10 Gb iSCSI, and 4/8 Gb Fibre Channel (FC) host

connectivity protocols. The Converged Network Controller (CNC) design of the S2200 makes the

selection of iSCSI or FC host connectivity as simple as attaching corresponding transceivers or

Direct-Attach Copper (DAC) cables to the SFP/SFP+ ports on the RAID controller.

The S2200 supports up to 96 drives with up to three external expansion enclosures. It also offers flexible

drive configurations with the choice of 2.5-inch and 3.5-inch drive form factors, 10 K or 15 K rpm SAS and

7.2 K rpm NL SAS hard disk drives (HDDs) and self-encrypting drives (SEDs), and SAS solid-state drives

(SSDs). The S2200 can be scaled up to 288 TB of raw storage capacity.

Did you know?

The S2200 supports Intelligent Real-time Tiering capabilities that help optimize system performance,

reduce costs, and simplify management. The base software includes the ability to move data dynamically

between SAS HDDs that are optimized for cost per IOPS and NL SAS HDDs that are optimized for cost

per GB. With the optional software license, the S2200 supports hybrid tiering across HDDs and SSDs.

The S2200 can be upgraded to the Lenovo Storage S3200 by replacing the RAID controllers in the

controller enclosure during a planned offline maintenance window without the need to migrate or move

data and re-configure the attached hosts. The new S3200 RAID controller recognizes the array

configuration and preserves the controller's host port parameters (for example, FC WWN).

The S2200 supports battery-free cache protection, which reduces maintenance costs and provides

permanent backup of unwritten cache data if there is a power failure.

Lenovo Storage S2200 2

Key features

The S2200 storage system includes the following key features and benefits:

Low-cost, entry-level storage with a single controller or dual active/active controller configurations for



high availability and performance.

Flexible host connectivity to match diverse client needs with support for 6/12 Gb SAS (SAS controller)



or 1/10 Gb iSCSI or 4/8 Gb FC connectivity (FC and iSCSI controller).

Support for 6 Gb SAS drive-side connectivity with support for 12x 3.5-inch large form factor (LFF) or



24x 2.5-inch small form factor (SFF) drives in the controller enclosure; scalable up to 48 LFF drives

per system with the attachment of Lenovo Storage E1012 expansion enclosure (12x LFF drives each)

or up to 96 SFF drives per system with the attachment of Lenovo Storage E1024 expansion enclosure

(24x SFF drives each) to satisfy growing needs for storage capacity and performance.

Flexibility in storing data on high-performance SAS SSDs, performance-optimized enterprise SAS



HDDs, or capacity-optimized enterprise NL SAS HDDs; mixing and matching drive types and form

factors within a single system to perfectly meet performance and capacity requirements for various

workloads.

Support for SEDs to allow clients to secure their sensitive data and to comply with various security



regulations, when required.

Rich set of standard functions available at no extra cost, including virtualized storage pools,



snapshots, thin provisioning, rapid rebuild, real-time HDD tiering, and SSD read cache.

Optional licensed functions, including higher number of snapshots for more scalability and real-time



SSD tiering for boosting IOPS performance.

In-chassis upgrade to the S3200 storage system without the need to migrate data or to re-configure



attached hosts.

Intuitive, web-based GUI for easy system set up and management.



Designed to comply with NEBS and MIL-STD requirements.



Designed for 99.999% availability.



The S2200 supports the complete range of data storage requirements, from highly used applications to

high-capacity, low usage applications.

The following 3.5-inch drives are supported:

High-performance SSDs: 400 GB



Performance-optimized, enterprise class disk drives: 600 GB and 900 GB 10 K rpm



High-capacity, archival-class nearline disk drives: 2 TB, 4 TB, and 6 TB 7.2 K rpm



The following 2.5-inch drives are supported:

High performance SSDs: 400 GB, 800 GB, and 1.6 TB



Performance-optimized, enterprise class disk drives:



300 GB and 600 GB 15 K rpm

600 GB, 900 GB, and 1.2 TB 10 K rpm

High-capacity, archival-class nearline disk drives: 1 TB 7.2K rpm



Other drives and expansion units are designed to be dynamically added with virtually no downtime, which

helps to quickly and seamlessly respond to ever-growing capacity demands.

Lenovo Storage S2200 3

The S2200 storage system offers high levels of system and data availability with the following

technologies:

Dual-active RAID controllers with low latency cache mirroring



Dual-port drives (HDDs and SSDs) with automatic drive failure detection and rapid RAID rebuild with



global hot spares

Redundant hardware, including host ports, controller modules, and power supplies and fans



Hot-swappable and customer replaceable components, including controllers, power supplies with



fans, and drives

Automated path failover support for the data path between the host and the drives with multipathing



software

Non-disruptive controller firmware upgrades for dual controller configurations with multipathing



The following functions are included with every S2200:

Intelligent Real-time Tiering for HDDs



Storage tiering helps optimize storage use with intelligent data placement to improve system

performance, reduce costs, and simplify management. S2200 automatically and dynamically moves

frequently accessed data to higher performing HDDs in the system without manually creating and

managing storage tier policies.

RAID levels 0, 1, 5, 6, and 10



Provide the flexibility to choose the level of data protection that is required.

Virtualized storage pools



Enables rapid, flexible storage provisioning and simple configuration changes. Stored data is

distributed across all drive groups in the pool (wide striping), which helps improve performance, lower

latency, and achieve higher volume capacities. When a new drive group is added to the pool, the

system performs automatic rebalancing to use all drives in the pool for better performance.

Thin provisioning



Optimizes efficiency by allocating drive storage space in a flexible manner among multiple

applications that is based on the minimum required space by each application at any specific time.

With thin provisioning, applications use only the space they are actually using and not the total space

that was allocated to them, which allows clients to purchase storage they need today and add storage

as application requirements grow.

SSD Read Cache



An extension of the controller's cache to improve performance of read-centric workloads.

Rapid RAID Rebuild



Helps significantly decrease the time to recover lost data by rebuilding only the stripe where the

corruption occurred, not the empty space or other stripes.

Snapshots



Enables creation of copies of data for backup, parallel processing, testing, and development, and

have the copies available almost immediately. Base software supports up to 64 snapshot targets per

system.

Lenovo Storage S2200 4

The S2200 storage capabilities can be expanded with optional licensed functions. Each optional S2200

function is licensed on a per-system basis and covers controller enclosure and all attached expansion

units.

The following optional licensed functions are available:

Intelligent Real-time Tiering for SSDs



The SSD tiering upgrade option makes it easy and economical to deploy hybrid storage by

dynamically moving frequently accessed data to SSDs in the system, which results in flash drive

performance without manually creating and managing storage tier policies.

Snapshots upgrade



The snapshot upgrade options increase the supported number of snapshot targets to 256 or 512 per

system.

The S2200 supports the following management interfaces:

Web-based graphical user interface (GUI) via HTTP that requires only a supported browser (Microsoft



Internet Explorer, Google Chrome, or Mozilla Firefox); therefore, there is no need for a separate

console or plug-in.

Command line interface (CLI) via Telnet or SSH or through Direct Connect USB.



HTTP scripting interface with XML encoding.



SNMP and email notifications.



Lenovo Storage S2200 5

Components

The following figure shows the front of the S2200 SFF chassis and E1024 drive expansion enclosure.

Figure 2. Front view of the S2200 SFF chassis and E1024 drive enclosure

The following figure shows the front of the S2200 LFF chassis and E1012 drive expansion enclosure.

Figure 3. Front view of the S2200 LFF chassis and E1012 drive enclosure

Lenovo Storage S2200 6

The following figure shows the rear of the S2200 with FC or iSCSI host interfaces with dual RAID

controllers. Single RAID controller configurations also are supported.

Figure 4. Rear view of the S2200 with FC or iSCSI host interfaces

The following figure shows the rear of the S2200 with SAS host interfaces with dual RAID controllers.

Single RAID controller configurations also are supported.

Figure 5. Rear view of the S2200 with SAS host interfaces

Lenovo Storage S2200 7

The following figure shows the rear of the E1012 and E1024 drive enclosures with dual I/O expansion

modules. Single I/O module configurations also are supported with the single-controller S2200.

Figure 6. Rear view of the E1012 and E1024 drive enclosures

Note: The RAID controllers (as shown in Figure 4 and Figure 5) and expansion modules (as shown in

Figure 6) include extra service ports with a specialized connector. These ports are reserved for use by a

Lenovo service technician.

Technical specifications

The following table lists the S2200 storage system technical specifications.

Table 1. Technical specifications (Part 1)

Components Specification

Form factor S2200 controller enclosure: 2U rack mount

E1012 or E1024 drive expansion enclosure: 2U rack mount

RAID controller

configuration

Two types of controllers:

S2200 SAS controller



S2200 FC and iSCSI controller



Single or dual RAID controller configurations supported. Single controller systems can be

upgraded to dual controller non-disruptively. Both controllers in the system must be the same.

RAID levels RAID 0, 1, 5, 6, and 10

RAID controller

cache

6 GB per controller. Battery-free cache protection with flash memory and supercapacitors. Low

latency cache mirroring protection for dual controller configurations.

Drive bays Up to 96 SFF drive bays per system:

24 SFF drive bays in the S2200 controller enclosure



24 SFF drive bays in the E1024 drive expansion enclosure; up to 3x E1024 enclosures



Up to 48 LFF drive bays per system:

12 LFF drive bays in the S2200 controller enclosure



12 LFF drive bays in the E1012 drive expansion enclosure; up to 3x E1012 enclosures



Intermix of SFF and LFF enclosures is supported.

Drive

technologies

SAS and NL SAS HDDs and SEDs; eMLC SAS SSDs. Intermix of HDDs and SSDs is

supported. Intermix of SEDs with HDDs or SSDs is not supported.

Lenovo Storage S2200 8

Table 1. Technical specifications (Part 2)

Components Specification

Drive

connectivity

Dual-ported 6 Gb SAS drive attachment infrastructure.

Controller enclosure with one or two RAID controllers (ports per one controller):

24x 6 Gb SAS internal drive ports (SFF chassis)



12x 6 Gb SAS internal drive ports (LFF chassis)



1x 6 Gb SAS x4 (Mini-SAS SFF-8088) expansion port for the attachment of the external



drive enclosures

Drive expansion enclosure with one or two expansion modules (ports per one module):

24x 6 Gb SAS internal drive ports (SFF chassis)



12x 6 Gb SAS internal drive ports (LFF chassis)



2x 6 Gb SAS x4 (Mini-SAS SFF-8088) expansion ports (IN and OUT) for the daisy chained



attachment of the external drive enclosures

Drives SFF drives:

400 GB, 800 GB, and 1.6 TB SAS SSDs



300 GB and 600 GB 15K rpm SAS HDDs



600 GB, 900 GB, and 1.2 TB 10K rpm SAS HDDs



1 TB 7.2K rpm NL SAS HDDs



LFF drives:

400 GB SAS SSDs



600 GB and 900 GB 10K rpm SAS HDDs



2 TB, 4 TB, and 6 TB 7.2K rpm NL SAS HDDs



Storage capacity Up to 288 TB (48x 6 TB NL SAS HDDs)

Host connectivity S2200 SAS controller: 2x 6/12 Gb SAS host ports (Mini-SAS HD, SFF-8644)

S2200 FC and iSCSI controller: 2x SFP/SFP+ CNC host ports

CNC host port options (per RAID controller):

2x 1 Gb iSCSI SFP (1 Gb speed, UTP, RJ-45)



2x 10 Gb iSCSI SFP+ (1/10 Gb speeds, SW fiber optics, LC)



2x 8 Gb FC SFP+ (4/8 Gb speeds, SW fiber optics, LC)



2x 10 Gb iSCSI SFP+ DAC cables



Host operating

systems

Microsoft Windows Server 2012 and 2012 R2; Red Hat Enterprise Linux (RHEL) 6 and 7;

SUSE Linux Enterprise Server (SLES) 10, 11, and 12; VMware vSphere 5.5 and 6.0.

Standard

software features

Intelligent Real-time Tiering for HDDs, Virtualized Storage Pools, Thin Provisioning, SSD Read

Cache, Rapid RAID Rebuild, Snapshots (up to 64 targets).

Optional features Intelligent Real-time Tiering for SSDs, Snapshots (up to 512 targets).

Performance Dual controller configuration:

Up to 80,000 random read IOPS (4 KB blocks)



Up to 3.3 GBps sequential read throughput (512 KB blocks)



Up to 2.4 GBps sequential write throughput (512 KB blocks)



Configuration

maximums

Per system:

Maximum number of virtual storage pools: 2 (1 per controller)



Maximum number of logical volumes (total/mapped): 2,048/1,024



Maximum logical volume size: 128 TB



Maximum number of drives in a drive group: 16



Maximum number of drive groups: 32



Maximum global spares: 16



Maximum number of initiators: 8,192 (1,024 per port)



Maximum number of hosts in a host group: 256



Maximum number of host groups: 32



Maximum number of initiators per host: 128



Maximum number of snapshots: 512 (requires an optional license)



Lenovo Storage S2200 9

Table 1. Technical specifications (Part 3)

Components Specification

Cooling Redundant cooling with two fans that are built into power supplies.

Power supply Two redundant hot-swap 595 W AC power supplies.

Hot-swap parts RAID controllers, expansion modules, SFP/SFP+ transceivers, drives, power supplies, and

fans.

Management

interfaces

Web-based GUI; Telnet, SSH, or Direct Connect USB CLI; HTTP scripting with XML encoding;

SNMP and email notifications

Security features Secure Socket Layer (SSL), Secure Shell (SSH), and SEDs

Warranty Three-year customer-replaceable unit, parts-only limited warranty with 9x5 next business day.

Service and

support

Optional warranty service upgrades are available through Lenovo: on-site support, 24x7

coverage, 4-hour response time, 1-year or 2-year warranty extensions, Hard Drive Retention.

Dimensions S2200 LFF and E1012: Height: 87 mm (3.4 in), width: 447 mm (17.6 in), depth: 523 mm



(20.6 in)

S2200 SFF and E1024: Height: 89 mm (3.5 in), width: 447 mm (17.6 in), depth: 519 mm



(20.5 in)

Weight S2200 LFF: Minimum: 17.7 kg (39.0 lb); Maximum: 27.5 kg (60.6 lb)



S2200 SFF: Minimum: 17.8 kg (39.2 lb); Maximum: 24.3 kg (53.6 lb)



E1012: Minimum: 16.8 kg (37.0 lb); Maximum: 26.6 kg (58.6 lb)



E1024: Minimum: 16.9 kg (37.2 lb); Maximum: 23.4 kg (51.6 lb)



Controller enclosures

The following table lists the models of the S2200 chassis.

Table 2. Part numbers and feature codes for ordering S2200 models

Description Part

number Feature code (MTM

6411-HC1)

Lenovo Storage S2200 LFF Chassis (without RAID controllers) None* AT14

Lenovo Storage S2200 SFF Chassis (without RAID controllers) None* AT15

Lenovo Storage S2200 LFF Chassis (with two SAS RAID controllers) 64112B2 None

Lenovo Storage S2200 SFF Chassis (with two SAS RAID controllers) 64112B4 None

Lenovo Storage S2200 LFF Chassis (with two FC and iSCSI RAID controllers) 64114B2 None

Lenovo Storage S2200 SFF Chassis (with two FC and iSCSI RAID controllers) 64114B4 None

* CTO or custom models only.

The part number for the S2200 includes the following items:

One S2200 chassis with two power supplies and fans:



With two SAS RAID controllers (64112B2, 64112B4) installed

With two FC and iSCSI RAID controllers (64114B2, 64114B4) installed

Two 4.3 m, 10 A/100 - 250 V, C13 to IEC 320-C14 Rack Power Cables



Lenovo Storage S2200 10

Lenovo Storage SAN Rack Mount Kit: Rails 25-inch to 36-inch



Lenovo 1.5 m USB console cable (USB to Mini-USB)



Getting Started Guide



Warranty Flyer



Important Notices Flyer



Documentation CD-ROM



RAID controller modules

The S2200 supports single and dual controller configurations. Standard models of the S2200 ship with

two RAID controller modules (for more information, see Table 2). Custom models of the S2200 can be

configured with one or two RAID controllers. Single-controller models can be upgraded to dual-controller

models non-disruptively.

The following types of RAID controller modules are available:

S2200 SAS RAID Controllers



S2200 FC and iSCSI RAID Controllers



S2200 SAS RAID Controllers provide direct SAS attachment for up to two hosts with a supported SAS

HBA installed. Each S2200 SAS Controller has two 6/12 Gb SAS ports with Mini-SAS HD (SFF-8644)

connectors.

S2200 FC and iSCSI RAID Controllers provide SAN based iSCSI or FC connectivity to the hosts with a

supported software initiator or HBA installed. Each S2200 FC and iSCSI Controller has a built-in CNC,

which has two SFP/SFP+ ports.

The CNC supports the following storage connectivity protocols, depending on the SFP/SFP+ transceiver

installed or DAC cables attached:

1 Gb iSCSI with 1 GbE RJ-45 SFP optical modules



1/10 Gb iSCSI with 10 GbE SW SFP+ optical modules with LC connectors



10 Gb iSCSI with 10 GbE SFP+ DAC cables



4/8 Gb Fibre Channel with 8 Gb FC SW SFP+ optical modules with LC connectors



Notes:

Both ports on the CNC on the S2200 FC and iSCSI RAID Controller must have the same connectivity



type (the same type of SFP/SFP+ modules or DAC cables).

For dual-controller configurations, both RAID controllers in the system must be of the same type and



they must have matching port configurations (that is, the ports on both S2200 RAID controllers must

have SFP/SFP+ modules of the same type).

Both SAS controllers and FC and iSCSI controllers have one 6 Gb SAS x4 expansion port (Mini-SAS

SFF-8088 connector) for the attachment of the E1012 and E1024 expansion enclosures.

Autres manuels pour S2200

Table des matières

Autres manuels Lenovo Stockage

Lenovo

Lenovo ThinkServer TD350 Manuel utilisateur

Lenovo

Lenovo IBM Storwize V3700 Manuel utilisateur

Lenovo

Lenovo DE2000H Manuel

Lenovo

Lenovo ThinkPad 43R2018 Manuel technique

Lenovo

Lenovo IBM TS3100 Manuel utilisateur

Lenovo

Lenovo IBM Storwize V5000 Manuel utilisateur

Lenovo

Lenovo Storage N3310 Manuel utilisateur

Lenovo

Lenovo ThinkStation P3 Tower Manuel utilisateur

Lenovo

Lenovo Beacon Manuel utilisateur

Lenovo

Lenovo 7D7Y Manuel utilisateur

Lenovo

Lenovo ThinkStation P7 Manuel utilisateur

Lenovo

Lenovo Lenovo Ultra Secure Memory Key Manuel utilisateur

Lenovo

Lenovo ThinkPad X131e Manuel utilisateur

Lenovo

Lenovo ThinkPad Basic USB 3.0 Manuel utilisateur

Lenovo

Lenovo Optical M10 Feuille d'instructions

Lenovo

Lenovo Mykey E10 Manuel utilisateur

Lenovo

Lenovo S3500 Manuel utilisateur

Lenovo

Lenovo Beacon Manuel du propriétaire

Lenovo

Lenovo 7D2C Manuel utilisateur

Lenovo

Lenovo ThinkSystem DM5100F Manuel d'utilisation

Lenovo

Lenovo F800 Manuel utilisateur

Lenovo

Lenovo ThinkSystem DE Series Manuel utilisateur

Lenovo

Lenovo ThinkStation P920 Manuel utilisateur

Lenovo

Lenovo V3700 V2 XP Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur