Lenovo DE4000H Manuel
Install hardwarePrepare for installation Cable storage Complete system setup
and configuration
1 2 3 4
ThinkSystem DE4000H, DE6000H,
and DE600S Storage Systems
Installation and Setup Instructions for 4U Enclosures
Create an account and register your hardware at datacentersupport.lenovo.com
Inventory cables and make note of the quantity.
Confirm that your location provides 200-240V AC power.
In the box
A supported browser
for the management
software
Phillips №2 screwdriver,
flashlight, and ESD strap
4U rack
space
№2
You provide
HELPFUL LINKS
•Lenovo Data Center Support Web site (worldwide):
http://datacentersupport.lenovo.com
•Lenovo Data Center Support Web site (Chinese Mainland):
http://support.lenovo.com.cn/EsWeb/
Second Edition (February 2020)
© Copyright Lenovo 2020.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant
to a General Services Administration (GSA) contract, use, reproduction, or disclosure
is subject to restrictions set forth in Contract No. GS-35F-05925.
LENOVO, LENOVO logo, and THINKSYSTEM are trademarks of Lenovo.
Microsoft and Windows are trademarks of the Microsoft group of companies.
All other trademarks are the property of their respective owners.
© 2020 Lenovo.
Prepare for installation |Stage 1
Pre-setup
Shelf, bezel, and
rackmount hardware
Shelf
handles
I/O cables
if ordered
Ethernet cables
if ordered
SAS cables
included only with
the drive shelves
Power cables
(two for each shelf)
× 4
4U
A 19 in. (48.30 cm)
rack to fit 4U shelves of the
following dimensions:
Max Weight: 250 lb. (113 kg)
Depth: 38.25 in (97.16 cm)
Width: 17.66 in. (44.86 cm)
Height: 6.87 in. (17.46 cm)
Machine Types: DE4000H (7Y77), DE6000H (7Y80), and DE600S (7Y69)
Printed in China
(1P) P/N: SP47A30402
Install hardware |Stage 2
Unpack the Hardware
Unpack the contents and inventory the contained hardware against
the packing slip. Read through all the instructions before proceeding.
Install the Rails
Refer to the enclosed instructions for detailed information
on how to install the rails. To download the instructions, go
to Lenovo Data Center Support Web site.
NOTE: Install hardware from the bottom of the rack up to
the top to prevent the equipment from toppling over.
Install the Shelf
Secure the Shelf
1. Insert screws into the first and third holes from
the top of the shelf on both sides to secure it to
the front of the cabinet.
2. Place two back brackets on each side of the upper
rear section of the shelf. Insert screws into the first
and third holes of each bracket to secure theback
of the cabinet.
Install the Drives
2. Starting at the front left slot of the top drawer, install each drive by gently
positioning into the drive slot and lowering the raised drive handle until it
clicks into place.
1. Wrap the strap end of the ESD wristband around your wrist, and
secure the clip end to a metal ground to prevent static discharges.
NOTE: If you are installing fewer than 60 drives, if you have
solid-state drives (SSDs), or if your drives have dierent capacities:
Maintain a minimum of 20 drives per shelf. Install drives in the front four
slots in each drawer first, for adequate airflow for cooling.
Distribute any remaining drives across the drawers. If possible, install an
equal number of each type of drive in each drawer to allow for the creation
of Drawer Loss Protected volume groups or disk pools.
Distribute any SSDs evenly across the drawers.
2. Supporting the shelf from the bottom, slide it into
the cabinet. If the lift handles are used, remove them
one set at a time as the shelf slides into the cabinet.
To remove the handles, pull back on the release latch,
push down, then pull away from the shelf.
1. If lifting the shelf by hand, attach the four lift handles.
Push up on each handle until it clicks into place.
4
Person
Team Lift
CAUTION: An empty shelf weighs approximately
132 lb (60 kg). A mechanized lift or four people using lift
handles are required to safely move an empty shelf.
3. Carefully slide the drawer back in by pushing the center
and gently closing both latches.
4. Attach the front bezel.
2
3
4
5
ATTENTION: Risk of equipment damage — Stop
pushing the drawer if you feel binding. Use the release
levers at the front of the drawer to slide the drawer
back out. Then, carefully reinsert the drawer into the slot.
Cable storage |Stage 3
0a 0b
P1 P2
EXP1 EXP2
0c 0d 0f
0e
0a 0b
P1 P2
EXP1 EXP2
0c 0d 0f0e
21 43
21 43
Example A: A DE4000H controller shelf with two DE600S
drive shelves in a standard SAS configuration
Example B: A DE4000H controller shelf with one DE600S
drive shelf in a standard SAS configuration
Example: Power connections are on the rear of the shelf.
Cable the Shelves
Cable the system according to your configuration.
Examples are shown in this section. For more cabling
options, see ThinkSystem DE-Series Hardware Installa-
tion and Maintenance Guide for 4U Enclosures.
Power the Drive Shelves
Example
Cable a controller shelf and
two drive shelves
Storage cables
Cable a controller shelf and
one drive shelf
Cable controller A to IOM A of the first drive shelf.
Cable IOM A of the first drive shelf to IOM A of
the second drive shelf.
Cable IOM B of the first drive shelf to IOM B of
the second drive shelf.
3
Cable controller B to IOM B of the second
drive shelf.
4
CAUTION: Confirm the drive shelf power switches are o.
3. Turn on the two power switches on the controller shelf.
4. Check the LEDs and seven-segment display on each controller.
During the boot sequence, the seven-segment display will display
various codes. After the controller has booted up, the shelf ID
will be displayed.
1. Connect the two power cables for each shelf to dierent
power distribution units (PDUs) in the cabinet or rack.
2. If you have drive shelves, turn on their two power switches
first. Wait 2 minutes before applying power to the controller shelf.
| Power Cables
0a 0b
P1 P2
EXP1 EXP2
0c 0d 0f0e
0a0b
P1 P2
EXP1 EXP2
0c 0d0f
0e
1 43
21 43
1
1
2
3
4
2
Example Storage cables
Cable controller A to IOM A.
Cable controller B to IOM B.
Complete system setup and configuration |Stage 4
Cable the Data Hosts
Cable the system according to your network topology.
Direct-attach topology
Option Connect each host adapter directly to the host ports on the controllers.
IP address: 192.168.128.101
IP address: 192.168.128.100
Subnet mask: 255.255.255.0
1. Using an Ethernet cable, connect to controller A port 1 (P1). to the ethernet port on
your laptop.
2. Manually specify the following IP address and subnet mask on the laptop’s
Ethernet port that you have physically connected to the storage array:
Fabric topology
Option
Connect each host adapter directly to the switch.
Connect each switch directly to the host ports on the controllers.
2
Connect and Configure the Management Connection
3. Use the laptop’s browser to access the storage array’s management
software using the following IP address:
After Installing the Hardware
1. Use the ThinkSystem SAN OS software to configure and manage your storage arrays.
2. In the simplest network configuration, connect your controller to a web browser and use
ThinkSystem System Manager for managing a single DE-series storage array.
3. In a more complex environment, use the ThinkSystem SAN Manager for managing multiple
storage arrays.
4. In the management software, go to the Hardware tab and select Show back of shelf
under Controller Shelf. Highlight controller B, and then select Configure management
ports to set the IP addresses for management port 1 on controller B. Do not configure
management port 2. This port is reserved for Lenovo technical support. After you
have configured controller B’s management port, repeat for controller A.
5. Disconnect your laptop from the storage array and connect an Ethernet cable
to management port 1 (labeled P1) on each DE4000H and DE6000H controller
and connect the other end to your network.
DE6000H controller
0a 0b
P1 P2
EXP1 EXP2
P1 P2
DE4000H controller
Ce manuel convient aux modèles suivants
2
Autres manuels Lenovo Stockage
Lenovo
Lenovo ThinkPad 43R2018 Manuel utilisateur
Lenovo
Lenovo 57Y4400 Manuel utilisateur
Lenovo
Lenovo D1212 Manuel utilisateur
Lenovo
Lenovo ThinkSystem DM3000 series Manuel
Lenovo
Lenovo V3700 V2 XP Manuel utilisateur
Lenovo
Lenovo F800 Manuel utilisateur
Lenovo
Lenovo px2-300d Manuel utilisateur
Lenovo
Lenovo 7D7Y Manuel utilisateur
Lenovo
Lenovo ThinkSystem DE Series Manuel utilisateur
Lenovo
Lenovo Flex System x220 Instructions d'installation et d'entretien
Lenovo
Lenovo ThinkSystem DM5100F Manuel d'utilisation
Lenovo
Lenovo 43N3417 - 256 GB Hard Drive Manuel utilisateur
Lenovo
Lenovo ThinkSystem DM240N Manuel utilisateur
Lenovo
Lenovo ThinkCentre neo 50q Gen 4 Manuel utilisateur
Lenovo
Lenovo ThinkPad Hard Disk Drive Manuel utilisateur
Lenovo
Lenovo ThinkSystem DM3000 series Manuel d'utilisation
Lenovo
Lenovo Beacon Manuel utilisateur
Lenovo
Lenovo IBM TS3100 Manuel utilisateur
Lenovo
Lenovo ThinkSystem DS Series Manuel d'utilisation
Lenovo
Lenovo ThinkSystem DE Series Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur