LEGRAND 067697 Comment utiliser

0676 97

Characteristics

Requires you to buy and install the "... with Netatmo" connected starter pack first.

Contents

The circuit must be protected by a 10 A circuit breaker.

Connected micromodule for roller shutters

Control

Module

Gateway and Home/Away wireless

switch

Roller shutter

motor

+ 50° C

- 5° C

35 mm

8 mm

1 x 2,5 mm2

2 x 1,5 mm2

IP 44

100-240 Vac

50/60 Hz

240 Vac max. 1 x 500 VA

100 Vac max. 1 x 270 VA

Before you start

If you plan to install connected micromodules for rolling shutters, read the following

precautions:

To order a roller shutter micromodule with one or more wireless controls, only use

the products:

Provide wireless controls for roller shutters for each additional control point.

To create a centralized order:

Use one or several wireless controls for roller shutters.

x1

or several

Wireless control for rolling shutter

(not included in this pack)

1Necessary safety precautions

2Install the connected micromodule for rolling shutter

Wire the connected micromodule for roller rolling shutter

N (neutral)=blue

L (live)=any except blue and gree/yellow

(earth=green/yellow

Frequency bands: 2.4 - 2.4835 GHz

Power level: < 100 mW

OFF

Switch OFF the power at main circuit

breaker

Make sure that the power

is OFF before continuing

with the installation.

1 2

This shutter micromodule is compatible

with roller shutters using mechanical

or electronic stop, controlled by an

electro-mechanical switch.

It's not compatible with radio roller

shutter controlled with a radio switch.

To check this, refers to roller shutter

instruction.

3 Start to congure the installed products

3 The indicator lights on the products that you have wired will turn green one by one.

Turn the power on at the main circuit breaker

***

*Example of products not supplied

> 3 s

2Press the conguration button of Modul Control or at the center

of the Hom/Away wireless switch until led ashes in green, then

stop pressing.

All leds of the wired products are green.

4 Prepared a wireless control

Remove the protective strip

of the wireless control of your choice.

Not included

in this pack.

Briefly press the wireless control to activate it.

The indicator light will flash green and then switch off.

5Pair the wireless control for rolling shutters

To pair a wireless control with one or several connected rolling shutters

Keep pressing the button on the wireless control and tap the micromodule for rolling

shutters you want to control 3 times with the control.

The two indicator lights on the product will flash blue rapidly.

The indicator lights on the two products will briefly turn blue, and then the light on the

wired product will turn green again and the light on the wireless control will switch off.

The pairing was successful.

Make sure that the indicator lights on the products are green and not flashing.

If not, go back to step 3.

Multiple pairing:

You can control several rolling shutters with the same wireless control by repeating the ope-

ration for each product that you want to control.

To complete your installation,

briefly press the middle of the wireless general control.

All the indicator lights on the products will switch off.

If necessary, cancel the wireless control pairing

1Press the middle of the button on the wireless control until the indicator light turns

orange without ashing.

2Conrm the cancellation by briey re-pressing the middle of this button on the wireless

control and the light will turn blue and then switch o. The pairint has now been

cancelled.

You can pair the wireles control with new products by starting again from step 5.

Repeat steps 4and 5for all wireless controls you want to install.

7Complete the conguration

< 1 s < 1 s

SIMPLIFIED EU DECLARATION OF CONFORMITY

The undersigned,

Legrand

declares that the radio-electric equipment referred to in these instructions

complies with directive 2014/53/UE.

The full text of the EU declaration of conformity is available

on the following website:

www.legrandoc.com

Safety instructions:

This product should be installed in compliance with installation rules, preferably by a qualied electrician.

Incorrect installation and/or incorrect use can lead to risk of electric shock or re.

Before carrying out the installation, read the instructions and take account of the product’s specic

mounting location.

Do not open up, dismantle, alter or modify the device except where specically required to do so by the

instructions. All Legrand products must be opened and repaired exclusively by personnel trained and

approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights

to replacement and guarantees.

Use only Legrand brand accessories.

To add a connected product to your connected installation, you should

follow the instruction:

- in the Legrand Home + Control application (settings/Add a new product section)

- or consult the user manuel on legrand.fr

LEGRAND - Pro and Consumer Service - BP 30076

87002 LIMOGES CEDEX FRANCE • www.legrand.com

www.legrand.fr/reference/067697

Table des matières

Autres manuels LEGRAND Unité de contrôle

LEGRAND

LEGRAND 5 735 04 Manuel utilisateur

LEGRAND

LEGRAND Wattstopper ELCU-200-347 Manuel utilisateur

LEGRAND

LEGRAND 422684 Manuel utilisateur

LEGRAND

LEGRAND 0 677 23L Manuel utilisateur

LEGRAND

LEGRAND 0 676 94 Manuel utilisateur

LEGRAND

LEGRAND Wattstopper IPPAN3-B Manuel utilisateur

LEGRAND

LEGRAND 739 60 Manuel utilisateur

LEGRAND

LEGRAND Eliocad 766 88 Manuel utilisateur

LEGRAND

LEGRAND Bypass MEGALINE/1 Manuel utilisateur

LEGRAND

LEGRAND H4651 Manuel utilisateur

LEGRAND

LEGRAND Wattstopper TDFC-1A Manuel utilisateur

LEGRAND

LEGRAND 26192 Manuel utilisateur

LEGRAND

LEGRAND 4 149 40 Mode d’emploi

LEGRAND

LEGRAND 0 677 55L Manuel utilisateur

LEGRAND

LEGRAND Wattstopper LMIN-104 Manuel utilisateur

LEGRAND

LEGRAND 7 521 82 Manuel utilisateur

LEGRAND

LEGRAND IC5010 Manuel utilisateur

LEGRAND

LEGRAND In One Pro 21 7756 24 Manuel utilisateur

LEGRAND

LEGRAND 4 149 29 Mode d’emploi

LEGRAND

LEGRAND Mosaic VDI 0 332 80 Manuel utilisateur

LEGRAND

LEGRAND 882 15 Manuel utilisateur

LEGRAND

LEGRAND 0 676 97 Manuel utilisateur

LEGRAND

LEGRAND EMDX3 MI Manuel utilisateur

LEGRAND

LEGRAND 6338 53 Manuel d'instructions

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur