LawnMaster CLHT2452D Manuel utilisateur

Instruction Manual

24V Lithium-Ion Cordless Hedge Trimmer CLHT2452

Read all safety instructions carefully before assembling and operating

this machine. Ensure the machine has been assembled correctly and safely. Keep the

instructions safe and pass them on to any subsequent user so that the information is always

available.

WARNING:

Original Instructions

13 14

TABLE OF CONTENTS

Section Page

Symbols

Safety Information

In the Box

Assembly

Operation

Maintenance

Troubleshooting

Technical Data

Recycling and Disposal

5-6

7-16

18-21

22-23

SYMBOL DESIGNATION/EXPLANATION

Caution.

Read instruction manual.

Wear eye and ear protection.

Do not use the hedge trimmer in the rain or on wet hedges.

Noise level specication LWA in dB(A).

Cutting length.

Protection Class II.

Only recharge battery packs with the supplied charger indoors.

Do not dispose of electrical equipment in domestic waste.

Batteries contain Li-ion, waste batteries should be sorted for ecofriendly disposal.

Do not dispose of waste batteries as unsorted municipal waste.

Do not dispose of battery packs in rivers or immerse in water.

Do not dispose of battery packs in re.

Do not subject the battery to direct sunlight over long periods and do not leave it

on or near a heat source (max. 60°C).

Recycle electrical waste products in an environmentally safe way where facilities

exist.

SYMBOLS

The following warning symbols appear throughout this manual and indicate the

appropriate safety measures you should take when operating and maintaining the

appliance.

Li-ion

SYMBOLS

To avoid serious personal injury, do not attempt to use this product until you read thoroughly and

understand completely the instruction manual.

If you do not understand the warnings and instructions in the instruction manual, do not use this

product.

WARNING

SAFETY INFORMATION

READ CAREFULLY BEFORE USE. KEEP FOR FUTURE

REFERENCE.

WARNING

Work Area Safety

■ Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

■ Do not operate power tools in explosive atmospheres, such

as in the presence of ammable liquids, gasses or dust.

Power tools create sparks which may ignite the dust or

fumes.

■ Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

Electrical Safety

■ Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators. There is

an increased risk of electric shock if your body is earthed or

grounded.

■ Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

Personal Safety

■ Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power

tool while you are tired or under the inuence of drugs,

alcohol or medication. A moment of inattention white

operating power tools may result in serious personal injury.

■ Use personal protective equipment. Always wear eye

SAFETY INFORMATION

protection. Protective equipment such as dust mask,

nonslip safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal injuries.

■ Prevent unintentional starting. Ensure the switch is in the

off-position before connecting to power source and/or

battery pack, picking up or carrying the tool. Carrying power

tools with your nger on the switch or energising power

tools that have the switch on invites accidents.

■ Remove any adjusting key or wrench before turning the

power tool on. A wrench or a key left attached to a rotating

part of the power tool may result in personal injury.

■ Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in

unexpected situations.

■ Dress properly. Do not wear loose clothing or jewellery.

Keep your hair, clothing and gloves away from moving

parts. Loose clothes, jewellery or long hair can be caught in

moving parts.

■ If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and

properly used. Use of dust collection can reduce dust-

related hazards.

Power Tool Use and Care

■ Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of re when used with

another battery pack.

■ Use power tools only with specically designed battery

packs. Use of any other battery packs may create a risk of

SAFETY INFORMATION

injury and re.

■ When battery pack is not in use, keep it away from other

metal objects, like paper clips, coins, keys, nails, screws

or other small metal objects, that can make a connection

from one terminal to another. Shorting the battery terminals

together may cause burns or a re.

■ Under abusive conditions, liquid may be ejected from the

battery; avoid contact. If contact accidentally occurs, ush

with water. If liquid contacts eyes, additionally seek medical

help. Liquid ejected from the battery may cause irritation or

burns.

■ Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the job

better and safer at the rate for which it was designed.

■ Do not use the power tool if the switch does not turn it on

and off. Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

■ Disconnect the battery pack from the power tool before

making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the

risk of starting the power tool accidentally.

■ Store power tools out of the reach of children and do not

allow persons unfamiliar with the power tool or these

instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

■ Maintain power tools. Check for misalignment or binding

of moving parts, breakage of parts and any other condition

that may affect the power tool’s operation. If damaged,

have the power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

SAFETY INFORMATION

■ Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

■ Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into account the

working conditions and the work to be performed. Use of

the power tool for operations different from those intended

could result in a hazardous situation.

Service

■ Have your power tool serviced by a qualied repair person

using only identical replacement parts. This will ensure that

the safety of the power tool is maintained.

Special Safety Information for Hedge Trimmers

■ Keep all body parts away from the blade. Do not attempt

to remove clippings while the blade is operating or to hold

on to material which is to be cut. Only remove trapped

clippings when the tool is switched off and battery is

removed. One moment of carelessness in the usage of the

hedge trimmer can lead to severe injury.

■ Carry the hedge trimmer by the handle with the blade

stopped. Always put on the protective cover during

transport and storage of the hedge trimmer. Careful

handling of the tool reduces the risk of injury from the

blade.

■ Hold the power tool only on the insulated handle surfaces,

as the cutting blade may come into contact with concealed

power cables. Contact between the cutting blade and a live

cable may render metallic components live and result in an

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels LawnMaster Tondeuse

LawnMaster

LawnMaster GT1238 Manuel utilisateur

LawnMaster

LawnMaster CLGT2412 Manuel utilisateur

LawnMaster

LawnMaster GT1454 Manuel utilisateur

LawnMaster

LawnMaster CLGT6014A Manuel utilisateur

LawnMaster

LawnMaster CLHT2452 Manuel utilisateur

LawnMaster

LawnMaster LML261 Manuel d'installation

LawnMaster

LawnMaster CLGT6014A Manuel utilisateur

LawnMaster

LawnMaster GT1018 Manuel utilisateur

LawnMaster

LawnMaster GT1018S Manuel utilisateur

LawnMaster

LawnMaster GT1415 Manuel utilisateur

LawnMaster

LawnMaster CLHT2218B01 Manuel utilisateur

LawnMaster

LawnMaster GT1313 Manuel utilisateur

LawnMaster

LawnMaster GT1450 Manuel utilisateur

LawnMaster

LawnMaster GT1313 Manuel utilisateur

LawnMaster

LawnMaster B261 Manuel d'installation

LawnMaster

LawnMaster NPTGSS2617A Manuel utilisateur

LawnMaster

LawnMaster NPTGCP2617A Manuel utilisateur

LawnMaster

LawnMaster CLGT2410H Manuel utilisateur

LawnMaster

LawnMaster LMCG260EH Manuel d'installation

LawnMaster

LawnMaster CLGT1018B01 Manuel utilisateur

LawnMaster

LawnMaster NPTGSP2517A Manuel utilisateur

LawnMaster

LawnMaster CLGT2425 Guide de démarrage rapide

LawnMaster

LawnMaster LB4060001S Manuel utilisateur

LawnMaster

LawnMaster HT2001 Manuel utilisateur

Manuels Tondeuse populaires d'autres marques

MTD

MTD HT 51 E Manuel utilisateur

McCulloch

McCulloch T22 LS Manuel utilisateur

COCKRAFT

COCKRAFT PRO HL36-S Manuel utilisateur

Grizzly

Grizzly CT 1800 Li Manuel utilisateur

Peco

Peco Z Trimmer ZT-3000 Manuel utilisateur

Solo

Solo 116 Manuel utilisateur

Stiga

Stiga ST 1200 Manuel utilisateur

Echo

Echo GT-225 - 10-09 Manuel utilisateur

RedMax

RedMax BT17 Manuel utilisateur

GreenWorks

GreenWorks STA806 Manuel utilisateur

Parkside

Parkside PHSL 900 A3 Manuel utilisateur

Gardeo

Gardeo PRO GPTHT2560 Manuel utilisateur

Park

Park DT-810870 Manuel utilisateur

Worx

Worx WG209 Manuel utilisateur

Gardenline

Gardenline 43671/HTKS26 Manuel utilisateur

Makita

Makita 3710 Manuel utilisateur

Champion

Champion 100683 Manuel utilisateur

Stihl

Stihl FS 311 Manuel utilisateur