LawnMaster GT1454 Manuel utilisateur
14’’ Corded Grass Trimmer GT1454
Read all safety rules and instructions carefully before operating this tool.
601 Regent Park Court Greenville, SC 29607, SC 29650 1-866-384-8432
Veuillez lire attentivement toutes les règles et consignes de sécurité avant de faire fonctionner cet outil.
601 Regent Park Court Greenville, SC 29607, SC 29650 1-866-384-8432
Coupe-Bordures Électrique de 14 po GT1454
MNL_GT1454_V1
EN p. 2
FR p. 22
OPERATOR’S MANUAL / MANUEL D'UTILISATION
By Nisha Mistry at 9:54 am, Nov 14, 2018
Contents
2
Product Specifications
2
General Safety Rules
3-5
Electrical Information 6-7
Know Your Grass Trimmer 8
Assembly 9-12
Operation 13-14
Maintenance 15-16
Troubleshooting
17
Warranty
18
Exploded View
19
Parts List
20
Notes
21
2
CONTENTS
PRODUCT SPECIFICATIONS
14” GRASS TRIMMER
Type Corded
Voltage
120 V~60Hz
Amp
5.5 A
Speed 8000 RPM
Line Size 0.065" (1.6mm)
Cutting Swath 14” (355mm)
Net Weight 5.78 lbs (2.6 kg)
3
GENERAL SAFETY RULES
WARNING
READ ALL INSTRUCTIONS AND SAVE THESE INSTRUCTIONS.
When using the grass trimmer the safety rules must be followed. For your
own safety and bystanders please read these instructions before operating the
grass trimmer. Do not use the grass trimmer without reading the instruction sheet.
Please keep the instructions safe for later use.
• This grass trimmer is designed for cutting grass, soft vegetation, and for edging.
• The device is not allowed to be used in public gardens, parks, sports centers or at roadsides as
well as in agriculture and forestry.
• This grass trimmer is not allowed to be used for cutting or chopping, otherwise, there is a risk of
injury. For example:
- Hedges, shrubs and bushes,
- Flowers,
- In terms of composting.
• Never allow children or people unfamiliar with these instructions to use the trimmer.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• Do not wear loose clothing or jewelry. They can be caught in moving parts. Use of gloves and
substantial footwear is recommended when working outdoors. Wear protective hair covering to
contain long hair.
• Stop using the grass trimmer while people, especially children, or pets are nearby.
• Only use the grass trimmer in daylight or good artificial light.
• Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s)
to be used for the gardening appliance. Receptacles are available having built-in GFCI
protection and may be used for this measure of safety.
• Before using the grass trimmer and after any impact, check for signs of wear or damage and
repair as necessary.
• Never operate the grass trimmer with damaged guards or without the guards in place.
• Keep hands and feet away from the cutting means at all times and especially when switching on
the motor.
• To reduce the risk of electric shock, use only with an extension cord intended for outdoor use,
such as an extension cord of cord type SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A,
SJTW-A or SJTOW-A.
4
GENERAL SAFETY RULES
• Keep proper footing and balance at all times.
• Take care against injury from any device fitted for trimming the filament line length. After extending
new cutter line always return the grass trimmer to its normal operating position before switching on.
• Never fit metal cutting elements.
• Never use replacement parts or accessories not provided or recommended by the manufacturer.
• Disconnect the grass trimmer from the outlet before checking, cleaning or working on the grass
trimmer and when it is not in use.
• Only use identical replacement parts when servicing a tool with double insulation. Servicing should
be performed by a qualified technician.
• Always ensure that ventilation openings are kept clear of debris.
• Avoid unintentional starting. Do not carry plugged-in appliance with finger on switch.
• Do not abuse the cord. Never carry appliance by the cord or yank it to disconnect from outlet.
Keep the cord from heat, oil, and sharp edges.
• It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR GRASS TRIMMER
• Do not expose to moisture.
• Use only on AC outlets supply voltage shown on the product rating label.
• Avoid operating your trimmer in wet grass, where feasible.
• Do not use in rain.
• On slopes, be extra careful of your footing and wear nonslip footwear.
• Do not walk backwards when trimming, you could trip.
• Always walk when operating the trimmer, never run.
• Switch the trimmer off before going over surfaces other than grass.
• Never pick up or carry a trimmer by the cord.
• Do not lean over the trimmer guard as objects may be throw by the cutting line.
• Keep all nuts, bolts and screws tight to be sure the trimmer is in safe working condition.
• To avoid the risk of injury keep fingers and hands clear of the line cutter on the leading edge of
the guard.
• After use, disconnect the machine from the outlet and check for damage
• When not in use, tools should be stored indoors in a dry and high, or locked-up place – out of
reach of children.
• Corded powered trimmers should only be repaired by an authorized technician.
• Use only manufacturer’s recommended replacement parts and accessories.
• The preparation for use, operation and maintenance of the appliance:
- Keep cutting edge sharp and clean for best performance and to reduce the risk of injury.
Follow instructions for lubricating and changing accessories. Inspect appliance cord periodically,
and if damaged, have it repaired by an authorized service facility. Inspect extension cords
periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease.
- Read the instructions carefully.
- Be familiar with the controls and proper use of the equipment.
- Before use check the supply and extension cord for signs of damage or aging.
- If the cord becomes damaged during use, disconnect the cord from the power supply
immediately.
- Do not use the trimmer if the cords are damaged or worn.
WARNING
5
GENERAL SAFETY RULES
- Cutting elements continue to rotate after the motor is switched off;
- Keep extension cords away from cutting elements.
WARNING
WARNING
6
ELECTRICAL INFORMATION
DOUBLE INSULATED
This grass trimmer has a plug. The grass trimmer is double insulated to provide a double
thickness of insulation between you and the tool’s electrical system. All exposed metal parts are
isolated from the internal metal motor components with protective insulation.
TO AVOID ELECTRICAL HAZARDS, FIRE HAZARDS, OR DAMAGE TO THE
TOOL, USE PROPER CIRCUIT PROTECTION. YOUR GRASS TRIMMER IS
WIRED AT THE FACTORY FOR 120V OPERATION. CONNECT TO A 120 V,
15 A CIRCUIT, AND USE A 15 A TIME-DELAYED FUSE OR CIRCUIT
BREAKER. TO AVOID SHOCK OR FIRE, IF THE EXTENSION CORD IS
WORN, CUT OR DAMAGED IN ANY WAY, REPLACE IT IMMEDIATELY.
USE ONLY IDENTICAL REPLACEMENT PARTS WHEN SERVICING THE
GRASS TRIMMER, TO AVOID INJURY.
WARNING
DOUBLE INSULATION DOES NOT TAKE THE PLACE OF NORMAL SAFETY
PRECAUTIONS WHEN OPERATING THIS GRASS TRIMMER.
CAUTION
ALWAYS MAKE SURE THAT YOUR OUTLET IS PROPERLY GROUNDED.
IF UNCERTAIN, HAVE IT CHECKED BY A CERTIFIED ELECTRICIAN.
WARNING
THIS GRASS TRIMMER IS FOR OUTDOOR USE ONLY. DO NOT EXPOSE
TO RAIN OR USE IN DAMP LOCATIONS.
7
ELECTRICAL INFORMATION
Make sure your extension cord is properly wired and in good electrical condition. Always replace a
damaged extension cord or have it repaired by a qualified person before use. Keep extension cords
away from sharp objects, excessive heat and damp or wet areas.
Use a separate electrical circuit for your tools. This circuit should comprise a wire of at least 12
gauge and should be protected with a 15 A time-delayed fuse. Before connecting the motor to the
power line, make sure the switch is in the OFF position and the electric current is identical to that
stamped on the motor nameplate. Running at a lower voltage will damage the motor.
GUIDELINES FOR USING EXTENSION CORDS
USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one heavy enough to carry the current your product
will draw. An undersized cord will cause overheating. The table below shows the correct size to use
depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge.
The smaller the gauge number, the heavier the cord.
Minimum Gauge for Extension Cords (AWG)
(Using 120 V only)
Ampere Rating AWG
120V
More Than
0
6
10
12
Not More Than
6
10
12
16
25ft (7.62m)
18
18
16
14
50ft (15.24m)
16
16
16
12
100ft (30.48m)
16
14
14
Not Recommended
150ft (45.72m)
14
12
12
Total Length of Cord in Feet (meters)
WARNING
SAVE THESE INSTRUCTIONS.
ALTHOUGH THIS GRASS TRIMMER IS DOUBLE INSULATED, THE EXTENSION
CORD AND RECEPTACLE MUST STILL BE GROUNDED WHILE IN USE TO
PROTECT THE OPERATOR FROM ELECTRICAL SHOCK.
KNOW YOUR GRASS TRIMMER
Components
1. Upper Handle
2. ON / OFF Switch
3. Cord Retainer Hook
4. Assist Handle
5. Upper Shaft
6. Connection Point Locking Pin
7. Lower Shaft
8. Pivoting Head Button
9. Debris Guard
10. Trimmer Head W / Line Spool
11. Trimming Line
12. Flower Guard
13. Motor Housing
14. Rotational Lock Button
The safe use of this product requires an understanding of the information on the product and in this
Operator’s Manual as well as a knowledge of the project you are attempting. Before use of this
product, familiarize yourself with all operating features and safety rules.
8
12
3
2
1
5
6
4
7
8
9
10
11
14
13
This product requires assembly.
• Carefully remove the product and any accessories from the box. Make sure that all items listed in
the packing list are included.
• Inspect the product carefully to make sure no breakage or damage occurred during shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily operated
the product.
• If any parts are damaged or missing, please call the service center.
9
ASSEMBLY
PACKING LIST
(1) Lower Shaft (with trimmer head and line spool installed)
(1) Upper Shaft
(1) Assist Handle
(1) Bolt
(1) Wing Nut
(1) Debris Guard
(1) Flower Guard
(1) Operator's Manual
WARNING
WARNING
10
ASSEMBLY
FITTING THE GUARD
1. Fit the debris guard into the slots on the trimmer housing and align the screw holes in the debris
guard with those in the trimmer head. Place the guard in position (Fig. 1).
2. Secure the guard with the screws using a phillips screwdriver (Fig. 2).
FITTING THE FLOWER GUARD
1. Pull the flower guard wide enough to extend wide enough to fit over the motor housing (Fig. 3).
2. Insert both ends of the steel bar into the recessed cavities on the motor housing (Fig. 4).
Before assembly, make sure that the grass trimmer is switched off and
unplugged.
Never use the grass trimmer unless the guard is properly fitted.
Fig. 1
Fig. 3 Fig. 4
Fig. 2
Autres manuels pour GT1454
1
Table des matières
Langues :
Autres manuels LawnMaster Tondeuse
LawnMaster
LawnMaster CLGT1018B01 Manuel utilisateur
LawnMaster
LawnMaster NPTGCP2617A Manuel utilisateur
LawnMaster
LawnMaster HT1805 Manuel utilisateur
LawnMaster
LawnMaster CLGT6036A Manuel utilisateur
LawnMaster
LawnMaster CLHT2452D Manuel utilisateur
LawnMaster
LawnMaster CLGT2410H Manuel utilisateur
LawnMaster
LawnMaster CLHT2452-01 Manuel utilisateur
LawnMaster
LawnMaster LB60001S Manuel d'installation
LawnMaster
LawnMaster LML261 Manuel d'installation
LawnMaster
LawnMaster B261 Manuel d'installation
LawnMaster
LawnMaster GT1415 Manuel utilisateur
LawnMaster
LawnMaster CLHT2422 Manuel utilisateur
LawnMaster
LawnMaster NPTGSP2517A Manuel utilisateur
LawnMaster
LawnMaster CLHT2218B01 Manuel utilisateur
LawnMaster
LawnMaster GT1238 Manuel utilisateur
LawnMaster
LawnMaster NPTGSP2617A Manuel utilisateur
LawnMaster
LawnMaster CLGT2425 Guide de démarrage rapide
LawnMaster
LawnMaster HT1805 Manuel utilisateur
LawnMaster
LawnMaster CLHT2218B Manuel utilisateur
LawnMaster
LawnMaster NPTGSS2617A Manuel utilisateur
