Larson Electronics EPLC2-LED-150W-RT-JB2-50C Manuel utilisateur

EPLC2-LED-150W-RT-JB2-50C

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

1of 3

This explosion proof light is designed for illumination of industrial locations. It uses the latest in

solid state lighting technology for long life, low maintenance and high efficiency.

The unique design focuses the light where it is needed, giving improved efficiency over a

conventional HID luminaire.

An internal, universal input, power-factor-corrected switch-mode supply allows it to be used from any

nominal 100-277V AC 50/60 Hz power supply without any variation in light output. A separate low

voltage model is also available which allows 11-25 Volts AC/DC power. Check product nameplate for

correct voltage.

WARNING

To avoid the risk of fire, explosion or electric shock, this product should be installed, inspected

and maintained by a qualified electrician only, in accordance with all applicable electrical codes.

To avoid electric shock:

•Be certain electrical power is OFF before and during installation and maintenance.

•Luminaire must be connected to a wiring system with an equipment-grounding conductor.

To avoid explosion:

•Make sure the supply voltage is within the luminaires’ voltage rating.

•Ensure the marked T rating is less than the ignition temperature of the Hazardous

Atmosphere.

•Do not operate in ambient temperatures above those indicated on the luminaire nameplate.

•Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.

For supply connections, use wire rated for at least 110°C

Recommended mounting height is 25-40 feet.

MOUNTING

This fixture offers an adjustable surface mounting system that allows this fixture to be mounted to any

flat surface including walls and ceilings. A single ½-13 bolt is used to mount the fixture to the

surface.

1. Using bolts, washers and nuts provided, attach brackets “A” to both sides of

bracket “B”.

2. The LED fixture has 9 holes for a versatile mount option. Select the holes that you would like

to use.

3. Brackets “A” will then be bolted to the LED fixture with the remaining bolts and washers.

4. The fixture is now ready for installation.

150 Watt Explosion Proof LED Flood Light - Surface Mount -

17,500 Lumens - C1D2 - 50ft Cord

Instruction Manual

EPLC2-LED-150W-RT-JB2-50C

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

2of 3

See Images Below as a Reference

BRACKETS A

BRACKET B

BRACKETS A

BRACKET B

EPLC2-LED-150W-RT-JB2-50C

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

3of 3

WIRING (see attached wiring diagram)

This unit comes preconfigured with selected cord cap, voltage, and beam angle. Once mounted, plug

cord into compatible receptacle with correct voltage on nameplate!

MAINTENANCE

Caution: To avoid personal injury, disconnect power to the light and allow the unit to cool

down before performing maintenance.

Warning: No user serviceable parts inside of fixture. Risk of electric shock. Removal of the lens

will void the warranty.

1. Perform visual, mechanical and electrical inspections on a regular basis. We recommend

routine checks to be made on a yearly basis. Frequency of use and environment should

determine this. It is recommended to follow an Electrical Preventive Maintenance Program

as described in NFPA 70B: Recommended practice for Electrical Equipment.

2. The lens should be cleaned periodically as needed to ensure continued photometric

performance. Clean the lens with a damp, non-abrasive, lint-free cloth. If not sufficient, use

mild soap or a liquid cleaner.

3. Inspect the cooking fins on the luminaire to ensure that they are free of any obstructions

or contamination (i.e. excessive dust build-up). Clean with a non-abrasive cloth if

needed.

4. Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.

WARRANTY

Should further information not covered by these instructions be required, please contact Larson Electronics at

1-800-369-6671 or sales@larsonelectronics.com for further assistance.

Please visit LarsonElectronics.com for Warranty and Return information.

WARNING: CHECK NAMEPLATE

FOR PROPER VOLTAGE. DAMAGE

FROM IMPROPER VOLTAGE WILL

VOID WARRANTY.

Table des matières

Autres manuels Larson Electronics Projecteur

Larson Electronics

Larson Electronics RL-16-LED-M Manuel utilisateur

Larson Electronics

Larson Electronics EPLC2-LED-150W-RT-JB2-25C Manuel utilisateur

Larson Electronics

Larson Electronics Golight RadioRay 7901 Manuel

Larson Electronics

Larson Electronics WAL-SM-MHFL-1000W-50C Manuel utilisateur

Larson Electronics

Larson Electronics LEDWP-LP-450-TRN-DCM Manuel utilisateur

Larson Electronics

Larson Electronics EPLC2-LED-150W-RT-JB2 Manuel utilisateur

Larson Electronics

Larson Electronics HAL-PRM-150W-LED Manuel utilisateur

Larson Electronics

Larson Electronics GL-4600-F-M-12I Manuel

Larson Electronics

Larson Electronics EPL-LED-150W-RT-DIMM Manuel utilisateur

Larson Electronics

Larson Electronics EPL-LED-150W-RT-JB2-X24V-75C-24W07 Manuel utilisateur

Larson Electronics

Larson Electronics EPLC2-LED-150W-RT-DIMM Manuel utilisateur

Larson Electronics

Larson Electronics WAL-QP-2X-25 Manuel utilisateur

Larson Electronics

Larson Electronics HAL-TRN Series Manuel utilisateur

Larson Electronics

Larson Electronics GL-2151-6IN Manuel

Larson Electronics

Larson Electronics Stryker Light Manuel

Larson Electronics

Larson Electronics EPL-LED-150W-RT-20-HDBC Manuel utilisateur

Larson Electronics

Larson Electronics LEDEQ-PK-24X2-CPR-SPFL Manuel utilisateur

Larson Electronics

Larson Electronics HID-22-SL-480V Manuel utilisateur

Larson Electronics

Larson Electronics LEDWP-600E-M Manuel utilisateur

Larson Electronics

Larson Electronics HID-22-SL-3M-GAP Manuel utilisateur

Larson Electronics

Larson Electronics LEDWP-600E-SSB-1227-56K Manuel utilisateur

Larson Electronics

Larson Electronics WAL-M-3X48LED-120 Manuel utilisateur

Larson Electronics

Larson Electronics GL-4600 Manuel

Larson Electronics

Larson Electronics GLR-FLK-2 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

VIZULO

VIZULO Micro Martin Guide de l'utilisateur

EuroLite

EuroLite LED IP FL-100 SMD Manuel utilisateur

Cooper Wheelock

Cooper Wheelock XB12 Manuel utilisateur

Allen + Roth

Allen + Roth 17624-000 Manuel utilisateur

ADJ

ADJ 4 STAGE PAK Manuel utilisateur

Cooper Lighting

Cooper Lighting EGL91SW233 Manuel utilisateur

Max

Max 37496 Manuel utilisateur

BEGA

BEGA 85 143 Manuel utilisateur

Beamz

Beamz 151.226 Manuel utilisateur

EuroLite

EuroLite LED IP FL-8 Manuel utilisateur

Ledj

Ledj PERFORMER 36 RGB Manuel utilisateur

Perel

Perel ELS3 Manuel utilisateur

Perel

Perel ELS3WD Manuel utilisateur

LumX

LumX LM 36130 Manuel utilisateur

Xtricity

Xtricity 4-80053 Manuel utilisateur

Stahl

Stahl 6521/4 Series Manuel utilisateur

Ecosense

Ecosense EcoSpec Manuel utilisateur

Ayrton

Ayrton minipanel FX Manuel utilisateur