Larson Electronics LEDWP-720 Manuel utilisateur

Larson Electronics LLC www.LarsonElectronics.com sales@larsonelectronics.com

9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364

LEDWP-720

Important: Please read carefully before installation and retain for future reference.

To prevent possible shock hazard, the fixture should be installed by a qualified licensed

electrician.

All electrical connections must be in accordance with local codes, ordinances and

National Electrical Code.

The use of safety protection such as safety eye glasses and protective gloves are

recommended.

Proper grounding of the fixture is essential for protection from shock, correct operation

and the elimination of electrical interference.

Danger: Risk of electrical shock. Turn off main power source before servicing.

Always transport and store the equipment in its original packaging and keep in a dry location. When

unpacking check for any cracks or damage to casting and glass lens, if in doubt do not install!

INSTALLATION:

Important: Make sure application surface can handle weight of light fixture.

1. Securely mount lower mounting bracket to application surface.

2. If installing other than 90°, loosen, but DO NOT remove, pivoting bolts. (top bolt)

3. Remove angle locking bolts. (bottom bolt)

4. Pivot to desired angle, replace and tighten angle locking bolts.

WIRING:

1. Once the module has been mounted in place, remove access cover by unthreading mounting

screws.

2. Insert source wire cable through cable gland provided on module.

3. Slip cable through cable holder provided to secure cable during installation.

4. Connect source wires to terminal block.

Connect the source GROUND wire to TERMINAL

Connect the source NEUTRAL wire to TERMINAL –“N”

Connect the source LIVE wire to TERMINAL –“L”

Ensure all wire terminal screws are tightened.

5. Once source wires are connected, restore power and check for illumination.

CAUTION: Do not look directly into fixture once powered and lit. Use protective shaded eye

wear when viewing.

Larson Electronics LLC www.LarsonElectronics.com sales@larsonelectronics.com

9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364

6. Replace access cover by securing the mounting screws on the access cover.

Recommended torque –10 in lb

WARNING: To retain seal integrity (and preserve warranty) do not loosen or remove any of the bolts

around the perimeter of the module. There are no serviceable components in the module. Removal

or loosening of any of these bolts will void all warranties.

SAFETY CABLE

Safety cable tabs have been mounted directly to the module allowing the assembly of a safety cable

or chain.

Table des matières

Autres manuels Larson Electronics Projecteur

Larson Electronics

Larson Electronics HAL-LED-174W Manuel utilisateur

Larson Electronics

Larson Electronics LEDWP-LP-450-KNL-DCM Manuel utilisateur

Larson Electronics

Larson Electronics EPL-WPLED-150W-RT-140DB Manuel utilisateur

Larson Electronics

Larson Electronics GLR-FLK-2 Manuel utilisateur

Larson Electronics

Larson Electronics EPL-LED-150W-RT-JB2-X24V-75C-24W07 Manuel utilisateur

Larson Electronics

Larson Electronics LEDWP-600E-M Manuel utilisateur

Larson Electronics

Larson Electronics HAL-PRM-150W-LED Manuel utilisateur

Larson Electronics

Larson Electronics EPLC2-WPLED-50W-RT Manuel utilisateur

Larson Electronics

Larson Electronics GL-4600-F-M-12I Manuel

Larson Electronics

Larson Electronics Golight RadioRay 7901 Manuel

Larson Electronics

Larson Electronics RT-100C-XEMG-10C Manuel utilisateur

Larson Electronics

Larson Electronics EPL-LED-150W-RT-20-HDBC Manuel utilisateur

Larson Electronics

Larson Electronics LEDEQ-PK-24X2-CPR-SPFL Manuel utilisateur

Larson Electronics

Larson Electronics WAL-M-3X48LED-120 Manuel utilisateur

Larson Electronics

Larson Electronics EPL-20W-HID-X12V-25-HR Manuel utilisateur

Larson Electronics

Larson Electronics WAL-QP-4X500-25 Manuel utilisateur

Larson Electronics

Larson Electronics LEDWP-600E-SSB-1227-56K Manuel utilisateur

Larson Electronics

Larson Electronics GL-4600 Manuel

Larson Electronics

Larson Electronics Golight Stryker ST Series Manuel

Larson Electronics

Larson Electronics Stryker Light Manuel

Larson Electronics

Larson Electronics EPL-LED-150W-RT-DIMM Manuel utilisateur

Larson Electronics

Larson Electronics HAL-TRN Series Manuel utilisateur

Larson Electronics

Larson Electronics EPLC2-LED-150W-RT-JB2 Manuel utilisateur

Larson Electronics

Larson Electronics LEDWP-500-M-20C Manuel utilisateur

Manuels Projecteur populaires d'autres marques

VIZULO

VIZULO Micro Martin Guide de l'utilisateur

EuroLite

EuroLite LED IP FL-100 SMD Manuel utilisateur

Cooper Wheelock

Cooper Wheelock XB12 Manuel utilisateur

Allen + Roth

Allen + Roth 17624-000 Manuel utilisateur

ADJ

ADJ 4 STAGE PAK Manuel utilisateur

Cooper Lighting

Cooper Lighting EGL91SW233 Manuel utilisateur

Max

Max 37496 Manuel utilisateur

BEGA

BEGA 85 143 Manuel utilisateur

Beamz

Beamz 151.226 Manuel utilisateur

EuroLite

EuroLite LED IP FL-8 Manuel utilisateur

Ledj

Ledj PERFORMER 36 RGB Manuel utilisateur

Perel

Perel ELS3 Manuel utilisateur

Perel

Perel ELS3WD Manuel utilisateur

LumX

LumX LM 36130 Manuel utilisateur

Xtricity

Xtricity 4-80053 Manuel utilisateur

Stahl

Stahl 6521/4 Series Manuel utilisateur

Ecosense

Ecosense EcoSpec Manuel utilisateur

Ayrton

Ayrton minipanel FX Manuel utilisateur