Larson Electronics RT-100C-XEMG-10C Manuel utilisateur

EPL-LED-150W-RT-XEMG-SP0009

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

1of 3

Replacement Remote Battery Backup Unit for EPL-LED-150W-

RT-100C-XEMG-10C Explosion Proof Flood Lights

Instruction Manual

Thank you for your purchase of the Larson Electronics EPL-LED-150W-RT-XEMG-SP0009.

WARNING:

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

CRITICAL SAFETY INSTRUCTIONS:

•INSTALLATION SHOULD ONLY BECONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY

RELEVANT LOCAL BUILDING CODES.

•RISK OFFIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF FIXTURE'S ELECTRICAL

SYSTEMS. IFNOTQUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.

•BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.

•MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE FIXTURE'S RATED VOLTAGE.

•TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP

OBJECTS. SUITABLE FOR DAMP LOCATIONS.

Never place spotlight face down when light is on. Doing so could burn/ignite surfaces such as seats, carpeting, etc. and

cause major property damage. Always turn spotlight off when not in use.

Avoid direct eye exposure the light source when light is on. DO NOT shine light into the face of someone else.

DO NOT touch lens of light when on or recently on. The lens/cooling fins will be hot after long periods.

DO NOT allow children to handle or operate this light.

DO NOT use this product for other than its intended use.

DO NOT operate in close proximity of combustible or flammable materials.

DO NOT attempt to operate this light if cord, plug, battery, lens or any part of the light is damaged or corroded.

WARNING

TO AVOIDTHE RISKOF FIRE,EXPLOSION OR ELECTRIC SHOCK, THIS PRODUCT SHOULD BE INSTALLED,

INSPECTEDAND MAINTAINEDBY A QUALIFIED ELECTRICIANONLY, IN ACCORDANCEWITHALL

APPLICABLEELECTRICAL CODES.

TO AVOIDELECTRIC SHOCK:

•BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.

•PRODUCT MUST BE CONNECTEDTOA WIRING SYSTEM WITHAN EQUIPMENT-GROUNDING

CONDUCTOR.

TO AVOIDEXPLOSION:

•MAKE SURE THE SUPPLY VOLTAGE IS WITHIN THE VOLTAGE RATING.

•ENSURETHE MARKED TRATING IS LESS THAN THE IGNITION TEMPERATURE OF THE HAZARDOUS

ATMOSPHERE.

•DO NOT OPERATE IN AMBIENT TEMPERATURES ABOVETHOSEINDICATED ON THE PRODUCT

NAMEPLATE.

•DO NOT OPERATE IF THE LENS, CORD, SEALS, HOUSING, RECEPTACLES, ETC. IS CRACKED OR DAMAGED.

IFSO, DISCONTINUE USEAND CONTACT MANUFACTURER FOR REPLACEMENT PARTS.

•ALL FASTENERS SHOULDBE PROPERLY SEATED.

The EPL-LED-150W-RT-XEMG-SP0009 from Larson Electronics is a Replacement Remote Battery Backup System for the EPL-

LED-150W-RT-100C-XEMG-10C explosion proof flood light. This replacement battery backup system can be used to replace lost,

malfunctioning, damaged, or otherwise compromised battery backup systems on the EPL-LED-150W-RT-100C-XEMG-10C explosion

proof flood light.

EPL-LED-150W-RT-XEMG-SP0009

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

2of 3

For supplyconnections, use wire rated for at least 110°C

WIRING

Standard pigtail(flying leads) wiring

We strongly encourage a licensed electrician install this product,in all locations especially in outdoor areas

where weatherproofing may be required. Universal voltage driver permits operation at 100V - 277V AC, 50 or 60Hz

except those factory ordered with low voltage 11V to 25V AC/DC.

Warning: Check product label for correct input voltage!

Attach supply line wires to the appropriate light fixture wires as shown

in thediagram 

Secure each pair of wires according to the diagram. Utilize a junction box or

similar device and take precautionary steps for weatherproofing all

connections if installed in a location where water may come in contact with the

unit. Ensure the unit is properly grounded and that wiring is done according to

all local and national electrical/building codes.

WARNING: The emergency battery backup enclosure and plug are NOT rated for Hazardous

Areas. The Emergency Battery Backup enclosure AND Cord Cap MUST remain OUTSIDE the

Hazardous Area during use!

Keep emergency battery backup ballast box closed at all

times during operation. Follow all applicable local, state, and

National Electrical Code for the hazardous area!

WARNING: CHECK NAMEPLATE

FOR PROPER VOLTAGE. DAMAGE

FROM IMPROPER VOLTAGE WILL

VOID WARRANTY.

MAINTENANCE

Caution: To avoid personal injury, disconnect power to the light and allow the unit to cool down before

performing maintenance.

Warning: No user serviceable parts inside of fixture. Risk of electric shock. Removal of the lens will void

the warranty.

1. Perform visual, mechanical and electrical inspections on a regular basis. We recommend routine

checks to be made on a yearly basis. Frequency of use and environment should determine this. It is

recommended to follow an Electrical Preventive Maintenance Program as described in NFPA 70B:

Recommended practice for Electrical Equipment.

2. The lens should be cleaned periodically as needed to ensure continued photometric performance.

Clean the lens with a damp, non-abrasive, lint-free cloth. If not sufficient, use mild soap or a liquid

cleaner.

3. Inspect the cooling fins on the luminaire to ensure that they are free of any obstructions or

contamination (i.e. excessive dust build-up). Clean with a non-abrasive cloth if needed.

4. Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.

This explosion proof LED light fixture is field serviceable. All major internal components can be purchased

from Larson Electronics and installed by a licensed electrician with basic tools. Contact the manufacturer for

replacement parts.

EPL-LED-150W-RT-XEMG-SP0009

Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com

3of 3

USE AND CARE

Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.

Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of

children when not in use.Inspect for good working condition prior to storage and before re-use.

REPLACEMENT PARTS

The EPL-LED-150W-RT-XEMG-SP0009 is designed to provide years of reliable performance. Should the need for

replacement parts arise, please contact Larson Electronics.

THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.

SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT

SALES@LARSONELECTRONICS.COM OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.

PLEASE VISIT LARSONELECTRONICS.COM FOR WARRANTY AND RETURN INFORMATION.

Table des matières

Autres manuels Larson Electronics Projecteur

Larson Electronics

Larson Electronics LEDWP-LP-450-TRN-DCM Manuel utilisateur

Larson Electronics

Larson Electronics LEDWP-720 Manuel utilisateur

Larson Electronics

Larson Electronics LEDWP-600E-M Manuel utilisateur

Larson Electronics

Larson Electronics GL-2151-6IN Manuel

Larson Electronics

Larson Electronics EPL-LED-150W-RT-DIMM Manuel utilisateur

Larson Electronics

Larson Electronics EPLC2-LED-150W-RT-JB2-25C Manuel utilisateur

Larson Electronics

Larson Electronics GL-4600 Manuel

Larson Electronics

Larson Electronics EPL-WPLED-150W-RT-140DB Manuel utilisateur

Larson Electronics

Larson Electronics EPL-LED-2X150W-RT Manuel utilisateur

Larson Electronics

Larson Electronics HID-22-SL-480V Manuel utilisateur

Larson Electronics

Larson Electronics EPLC2-LED-150W-RT-DIMM Manuel utilisateur

Larson Electronics

Larson Electronics Golight RadioRay 7901 Manuel

Larson Electronics

Larson Electronics EPLC2-WPLED-50W-RT Manuel utilisateur

Larson Electronics

Larson Electronics EPLC2-LED-150W-RT-JB2-50C Manuel utilisateur

Larson Electronics

Larson Electronics BL24-LED Manuel utilisateur

Larson Electronics

Larson Electronics LEDWP-LP-450-KNL-DCM Manuel utilisateur

Larson Electronics

Larson Electronics HAL-LED-174W Manuel utilisateur

Larson Electronics

Larson Electronics WAL-SM-MHFL-1000W-50C Manuel utilisateur

Larson Electronics

Larson Electronics GLR-FLK-2 Manuel utilisateur

Larson Electronics

Larson Electronics EPL-20W-HID-X12V-25-HR Manuel utilisateur

Larson Electronics

Larson Electronics RL-16-LED-M Manuel utilisateur

Larson Electronics

Larson Electronics RCL200-RF Manuel utilisateur

Larson Electronics

Larson Electronics WAL-QP-2X-25 Manuel utilisateur

Larson Electronics

Larson Electronics LEDWP-600E-SSB-1227-56K Manuel utilisateur

Manuels Projecteur populaires d'autres marques

VIZULO

VIZULO Micro Martin Guide de l'utilisateur

EuroLite

EuroLite LED IP FL-100 SMD Manuel utilisateur

Cooper Wheelock

Cooper Wheelock XB12 Manuel utilisateur

Allen + Roth

Allen + Roth 17624-000 Manuel utilisateur

ADJ

ADJ 4 STAGE PAK Manuel utilisateur

Cooper Lighting

Cooper Lighting EGL91SW233 Manuel utilisateur

Max

Max 37496 Manuel utilisateur

BEGA

BEGA 85 143 Manuel utilisateur

Beamz

Beamz 151.226 Manuel utilisateur

EuroLite

EuroLite LED IP FL-8 Manuel utilisateur

Ledj

Ledj PERFORMER 36 RGB Manuel utilisateur

Perel

Perel ELS3 Manuel utilisateur

Perel

Perel ELS3WD Manuel utilisateur

LumX

LumX LM 36130 Manuel utilisateur

Xtricity

Xtricity 4-80053 Manuel utilisateur

Stahl

Stahl 6521/4 Series Manuel utilisateur

Ecosense

Ecosense EcoSpec Manuel utilisateur

Ayrton

Ayrton minipanel FX Manuel utilisateur