Lantronix 300.000.4000 Manuel utilisateur

Two-Port KVM Switch

Model 300.000.4000

User Guide

Part Number 15.00.040

Revision

August 2002

2-Port KVM User Guide Lantronix Inc.

Page ii www.lantronix.com

User Guide KVM 2-Port

reproduced in any form or by any means without the written permission of Lantronix. Printed in

the United States of America. Also electronically distributed via Adobe PDF file format.

Ethernet is a trademark of XEROX Corporation. UNIX is a registered trademark of The Open

Group. Windows 95, Windows 98, Windows 2000, and Windows NT are trademarks of

Microsoft Corp. Netscape is a trademark of Netscape Communications Corporation. Adobe

Acrobat and PDF are trademarks of Adobe Corporation. Other trademarks and service marks are

held by their respective owners.

2-Port KVM User Guide

Lantronix

15353 Barranca Parkway

Irvine, CA 92618 USA

Phone: (949) 453-3990

Fax: (949) 453-3995

Internet: www.lantronix.com

15.00.040 Rev. A Page iii

2-Port KVM User Guide Lantronix Inc.

Disclaimer & Revisions

Operation of this equipment in a residential area is likely to cause interference in which case the

user, at their own expense, will be required to take whatever measures may be required to correct

the interference.

Attention: This product has been designed to comply with the limits for a Class A

digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide

reasonable protection against such interference when operating in a commercial

environment. This equipment generates, uses, and can radiate radio frequency

energy, and if not installed and used in accordance with this guide, may cause

harmful interference to radio communications.

Changes or modifications to this device not explicitly approved by Lantronix will void the user's

authority to operate this device.

The information in this guide may change without notice. The manufacturer assumes no

responsibility for any errors that may appear in this guide.

Date Rev. Part

No.

Comments

August 2002 A 15.00.040 Initial Release

Page iv www.lantronix.com

User Guide KVM 2-Port

Declaration of Conformity

(according to ISO/IEC Guide 22 and EN 45014)

Manufacturer’s Name & Address:

Lightwave Communications, 100 Washington Street, Milford, CT 06460 USA

Lightwave is a Lantronix Company.

Declares that the following product:

Product Name & Model: KVM 2-Port

Conforms to the following standards or other normative documents:

Safety:

EN60950: 1992+A1, A2, A3, A4, A11

Electromagnetic Emissions:

EN55022 Class A: 1998 (CISPR 22, Class A: 1993, A1: 1995, A2: 1996)

EN 1000-3-2/A14: 2000

EN 10003-3: 1994

Electromagnetic Immunity:

EN55024: 1998 Information Technology Equipment-Immunity Characteristics:

EN61000-4-2: 1995 Electro-Static Discharge Test

EN61000-4-3: 1996 Radiated Immunity Field Test

EN61000-4-4: 1995 Electrical Fast Transient Test

EN61000-4-5: 1995 Power Supply Surge Test

EN61000-4-6: 1996 Conducted Immunity Test

EN61000-4-8: 1993 Magnetic Field Test

EN61000-4-11: 1994 Voltage Dips & Interrupts Test

Supplementary Information:

This Class A digital apparatus complies with Canadian ICES-003 (CSA) and has been verified as

being compliant within the Class A limits of the FCC Radio Frequency Device Rules (FCC Title

47, Part 15, Subpart B CLASS A), measured to CISPR 22: 1993 limits and methods of

measurement of Radio Disturbance Characteristics of Information Technology Equipment. This

product also complies with the requirements of the Low Voltage Directive 72/23/EEC and the

EMC Directive 89/336/EEC.

This product carries the CE mark since it has been tested and found compliant with the following

standards:

Safety: EN 60950

Emissions: EN 55022 Class A

Immunity: EN 55024

15.00.040 Rev. A Page v

2-Port KVM User Guide Lantronix Inc.

Table of Contents

1.0 System Description ......................................................................................... 7

1.1 System Features ......................................................................................... 7

2.0 Installation ....................................................................................................... 7

2.1 System Features ......................................................................................... 8

2.2 Hardware Features...................................................................................... 8

2.3 Mounting Instructions .................................................................................. 8

2.4 Connections................................................................................................. 9

3.0 Operation ...................................................................................................... 10

3.1 Front Panel Button operation..................................................................... 11

3.1 Keyboard operation ................................................................................... 11

3.3 Keyboard Emulation .................................................................................. 11

Page vi www.lantronix.com

User Guide KVM 2-Port

1.0 System Description

The Lantronix 2-Port KVM (300.000.4000) is a Keyboard, Mouse and Video

switching system for one user and two PS/2-equipped computers.

2-Port KVM, Front View

1.1 System Features

• Control two computers with one Keyboard, Mouse and Monitor

• Emulates PS/2 Keyboard in the event of power interruption

• Front panel pushbutton controls AND keyboard control

• Front panel LEDs show connection status and power

2.0 Installation

The KVM 2-Port is connected in between two computers (or servers) and one

user station, consisting of a PS/2-type keyboard, PS/2-type mouse or trackball

device, and a video monitor. It must be placed within limited cable distances of

these components, but is generally placed on a shelf or in a 19-inch EIA

equipment rack near the computer equipment. The KVM 2-port requires one AC

power connection (an IEC-type power cordset is provided with the unit).

All connections are made with industry-standard mouse, keyboard and video

connectors found in conventional PC computer equipment. The necessary PS/2

and Video cables are ordered and shipped with the KVM 2-Port.

KVM 2-Port, Rear View, showing connections

15.00.040 Rev. A Page 7

2-Port KVM User Guide Lantronix Inc.

The KVM 2-port unit has two pushbuttons and several LEDs on its front panel.

The user will press the pushbuttons to switch from one server to the other. The

User may also switch from server to server using keyboard commands, and need

not press the front panel buttons to operate the unit.

There are no user-servicable parts inside the unit. A protective power fuse is

located in the power entry module, accessible from the rear of the unit. The fuse

should never need replacement during normal operation or usage.

2.1 System Features

• PS/2-type connections for Keyboard and Mouse

• HD-15 connectors for Video Monitors

• Independent of computer platform and OS

• Silent operation, suitable for placement near personnel

• Class A compliant device

2.2 Hardware Features

• Rack Mountable in standard EIA 19-inch rack, 1RU tall

• AC powered using a single universal AC power inlet (with IEC cordset)

• One User position for a Keyboard, Mouse and HD15 Video Connection

• Two Computer positions (A & B) for Keyboard, Mouse and HD15 Video

connection inputs

• Keyboard connections are emulated to maintain proper signals between

the two computers; keyboard emulation is maintained even if the 2-Port

KVM loses power

• Low power usage and silent operation. Unit is convection cooled and

requires no special environmental considerations

2.3 Mounting Instructions

The 2-port KVM is in a metal enclosure and may be placed on a shelf, or rack-

mounted in a conventional EIA-type 19-inch rack. Removable rack mount

brackets are included with the unit. You must provide rack mount screws for your

rack assembly.

All connections are made to the rear of the unit, and the Power Switch is on the

rear of the unit.

If placing the unit on a shelf or desktop, install the four rubber feet included with

the unit to protect the desk surface.

Page 8 www.lantronix.com

User Guide KVM 2-Port

KVM 2-Port, Side View, showing removable Rack Mount bracket

2.4 Connections

Your system is shipped with the two Video Cables and four PS/2 cables (for

Mouse and Keyboard), based on your requirements. After locating the Computer

equipment and the KVM 2-Port where desired:

1. Using conventional PS/2 (MiniDIN-6) mouse and keyboard male-to-

male cables, connect 'Computer A' to the Mouse (M) and Keyboard

(K) connector on the back of the unit. Connect Computer B in a

similar fashion.

2. Connect the User's Keyboard or Keyboard/Trackball device to the

User's Keyboard (K) and Mouse (M) connectors.

3. Connect the Video sources from Computer A and Computer B to

the appropriate Video connectors on the back of the unit.

4. Connect the User's Monitor to the User video connector.

5. Connect the power cords. Turn the Computers on, turn the Monitor

On and turn the KVM 2-Port On (no particular order required).

15.00.040 Rev. A Page 9

2-Port KVM User Guide Lantronix Inc.

100-240V~,.3A,50/60HzT4A,250VAC

Caution!Replacewithsametypeandratingfuse.

USER

COMPUTERA

COMPUTERB

MKVMKVMKV

Monitor

Keyboard Mouse

Computer B

Computer A

PS/2 Mouse M-M

PS/2 Keyboard M-M

HD15 Video M-M Cable

PS/2 Mouse M-M

PS/2 Keyboard M-M

HD15 Video M-M Cable

HD15

Video

Cable

PS/2

Mouse

PS/2

Keyboard

AC Power

KVM 2-Port, Rear View, showing typical connections

3.0 Operation

User Operation does not interfere with any mouse or keyboard activity of the

attached computers. There are two methods of operations: buttons and keyboard

control.

The front panel Power LED (to the left side) will show GREEN with normal

power. If the KVM 2-Port loses power, the Video signal will be lost.

Page 10 www.lantronix.com

Table des matières

Autres manuels Lantronix Changer

Lantronix

Lantronix LSS2200-8P Manuel utilisateur

Lantronix

Lantronix SISGM1040-284-LRT Manuel utilisateur

Lantronix

Lantronix LMR8TT Manuel utilisateur

Lantronix

Lantronix LS Series Manuel utilisateur

Lantronix

Lantronix MINI FAST LFH4-M Manuel utilisateur

Lantronix

Lantronix SM8TAT2SA-DC Manuel utilisateur

Lantronix

Lantronix Hub Manuel utilisateur

Lantronix

Lantronix SLB088411-01 Manuel utilisateur

Lantronix

Lantronix SM48TAT4XA-RP Manuel utilisateur

Lantronix

Lantronix SLS200USB0-02 Manuel utilisateur

Lantronix

Lantronix LSW2F8 Manuel utilisateur

Lantronix

Lantronix Xpress-Pro SW 92000 Manuel utilisateur

Lantronix

Lantronix SISPM1040-384-LRT-C Manuel utilisateur

Lantronix

Lantronix SISPM1040-3 L Series Manuel utilisateur

Lantronix

Lantronix SM8TAT2SA Manuel utilisateur

Lantronix

Lantronix SM12XPA Manuel utilisateur

Lantronix

Lantronix SecureLinx Spider Manuel utilisateur

Lantronix

Lantronix SecureLinx SLK Series Manuel utilisateur

Lantronix

Lantronix Series 1000 Manuel utilisateur

Lantronix

Lantronix SISPM1040-582-LRT Manuel utilisateur

Lantronix

Lantronix SecureLinx Spider Manuel utilisateur

Lantronix

Lantronix SUN-PC Manuel utilisateur

Lantronix

Lantronix SM24TBT2DPA Manuel utilisateur

Lantronix

Lantronix SISTP1040-551-LRT Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur