Lantech IPES-0208CA-12V Manuel utilisateur
Lantech
IPES-0208CA
8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo w/
8x12V/24V/48V PoE at/af Injector Industrial Switch
User Manual
V1.2
May 2021
FCC Warning
This Equipment has been tested and found to comply with the limits for a
Class-A digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy. It may cause harmful interference to radio
communications if the equipment is not installed and used in accordance
with the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CE Mark Warning
This is a Class-A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
Content
Introduction................................................................ 1
Features................................................................... 1
Technical Specification............................................ 2
Package Contents................................................... 5
Safety Precaution.................................................... 5
Hardware Description ............................................... 6
Physical Dimension................................................. 6
Front Panel.............................................................. 7
Top View.................................................................. 8
LED Indicators......................................................... 8
Ports......................................................................... 9
Cabling................................................................... 10
Wiring the Power Inputs .......................................11
Wiring the Fault Alarm Contact........................... 13
Mounting Installation .............................................. 14
DIN-Rail Mounting................................................. 14
Wall Mounting........................................................ 15
Hardware Installation .............................................. 17
Installation Steps................................................... 17
Network Application................................................ 18
Troubleshooting ...................................................... 19
1
Introduction
IPES-0208CA Industrial Switch is a cost-effective solution, which meets the high
reliability requirements demanded by industrial applications, and also supports to
operate in the wide temperature -40°C ~ 75°C environments(-E model). Besides, the
equipment supports 12V/24V/48V DC power input and provides the PoE function with
48VDC output for any kinds of powered devices to receive power as well as data over
an RJ-45 cable.
Features
System Interface/Performance
RJ-45 port support Auto MDI/MDI-X Function
Embedded 8-port booster PoE injector function
SFP (Mini-GBIC) supports 100/1000 Dual Mode
IEEE 802.3af/at Standards
Back-plane (Switching Fabric): 5.6Gbps
1Mbits Packet Buffer
8K MAC Address Table
Support Operating Temperature (-20°C~60°C)/ (-40°C~75°C)-E models
DC 12V/24V/48V Redundant Power Input
Operating Temperature
Standard Temperature: -20°C~60°C
Extended Temperature: -40°C~75°C
Case/Installation
IP-30 Protection
Installation in a Pollution Degree 2 environment
DIN Rail and Wall Mount** Design
Provides EFT protection 3,000 VDC for power line
Supports 6,000 VDC Ethernet ESD protection
**Optional
2
Technical Specification
The technical specifications of IPES-0208CA Industrial Switch are listed as follows.
Communications
Compatibility
IEEE 802.3, 802.3u, 802.3ab 802.3z, 802.3x,
802.3af/at
LAN
10/100Base-T
Switch Architecture
Back-plane (Switching Fabric): 5.6Gbps
Packet throughput ability(Full-Duplex): 8.3Mpps
@64bytes
Interface
Connectors
10/100TX: 8 x RJ-45
10/100/1000T/ Mini-GBIC Combo: 2 x RJ-45 + 2 x
100/1000 SFP sockets
LED Indicators
Unit: Power1, Power2, P-Fail, PoE
Ethernet port: Link/Active, Speed
PoE
Power Output
Per port 48 VDC, 15.4 Watts(802.3af)/30Watts(at)
Pin Assignment
RJ-45 port #1 ~ # 8 support IEEE 802.3af/at
End-point, Alternative A mode.
Positive (VCC+): RJ-45 pin 1, 2.
Negative (VCC-): RJ-45 pin 3, 6.
Data (1,2,3,6 )
Power
Power Consumption
10 Watts (Max.); POE Power Budget:240 Watts
(48V input); 120W(24V input); 90W(12V)
3
Power Input
External Power Supply: DC 9~56V, Redundant
power D9V~DC 56V and connective removable
terminal block
Fault Output
1 Relay Output
Mechanism
Dimensions (WxHxD)
74mm (W) x 114mm (D) x 152mm (H)
Enclosure
IP-30, Metal shell with solid mounting kits
Mounting
DIN Rail and Wall Mount** Design
Protection
ESD (Ethernet)
6,000 VDC
Surge (EFT for power)
3,000 VDC
Power Reverse
Yes
Overload current protection
Yes
Environment
Operating Temperature
Standard: -20°C~60°C /-4°F~140°F
Extended:- 40°C~75°C /-40°F~167°F
Operating Humidity
5% ~ 95% (non-condensing)
Storage Temperature
-40 ~ 85oC
Storage Humidity
5% ~ 95% (non-condensing)
Certifications
EMC
FCC Class A, CE EN55032 Class A, CE
EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE
EN-61000-4-4 (EFT),
CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS),
CE EN61000-4-8, CE EN61000-4-11,
CE EN61000-4-12, CE EN61000-6-2, CE
EN61000-6-4
4
Free Fall
IEC60068-2-32
Shock
IEC60068-2-27
Vibration
IEC60068-2-6
5
Package Contents
Please refer to the package contents list below to verify them against the checklist.
IPES-0208CA Industrial Switch (with DIN-Rail Bracket)
User manual (By request)
Removable Terminal Block
Optional Wall-mount Kit** (2 wall-mount bracket with screws)
Compare the contents of the industrial switch with the standard checklist above. If any
item is damaged or missing, please contact the local dealer for service.
Safety Precaution
Attention
IF DC voltage is supplied by an external circuit, please use a protection
device on the power supply input.
6
Hardware Description
In this paragraph, the Industrial switch’s hardware specs, ports, cabling information, and
wiring installation will be described.
If this switch needs to uplink with another switch via a PoE copper port, please
make sure the uplink port on the other unit is a none-PoE interface. You may also
contact our sales team to confirm if the switch supports power isolation.
Physical Dimension
IPES-0208CA Industrial Switch dimensions (W x D x H) is 74mm x 114mm x 152mm,
the detail dimensions as Figure-1
Figure-1: Mechanical Dimensions
7
Front Panel
The Front Panel of IPES-0208CA Industrial Switch is shown below Figure-2
Figure-2: Front Panel of the PoE Injectors Industrial Switch
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Lantech Changer
Lantech
Lantech LPGS-2424C Series Manuel utilisateur
Lantech
Lantech IES-3416DSFP Manuel utilisateur
Lantech
Lantech LGS-1104 Manuel utilisateur
Lantech
Lantech IPGS-3 Series Manuel utilisateur
Lantech
Lantech IPES/IES-5416DFT Series Manuel utilisateur
Lantech
Lantech IES-3 Series Manuel utilisateur
Lantech
Lantech TPGS-L6208XT Manuel utilisateur
Lantech
Lantech IPES-5222T Series Manuel utilisateur
Lantech
Lantech IGS-2206C Manuel utilisateur
Lantech
Lantech GE-800 Manuel utilisateur
Lantech
Lantech Treo 500 Manuel utilisateur
Lantech
Lantech IES-2208CA-DNV Manuel utilisateur
Lantech
Lantech IPES-0104FA Manuel utilisateur
Lantech
Lantech IGS-2404 Manuel utilisateur
Lantech
Lantech IES-5416T Series Manuel utilisateur
Lantech
Lantech LES-2400-RPS Manuel utilisateur
Lantech
Lantech IPES-3408GSFP Manuel utilisateur
Lantech
Lantech IGS-0008A Manuel utilisateur
Lantech
Lantech IPES-0005B Series Manuel utilisateur
Lantech
Lantech IPES-0008A-12V Manuel utilisateur
