Lantech IES-5416DF Series Manuel utilisateur

IPES/IES-5416DF

IPES/IES-5216DF

Series

16 10/100TX + 4 or 2 100/1000FX Dual Speed Fiber L2+(w/ PoE

at/af) EN50155 Managed Ethernet Switch

User Manual (Hardware)

IP-67

IP-54

Apr 2019

Recommendation for Shielded network cables

STP cables have additional shielding material that is used to reduce external interference.

The shield also reduces the emission at any point in the path of the cable. Our

recommendation is to deploy an STP network cable in demanding electrical environments.

Examples of demanding indoor environments are where the network cable is located in

parallel with electrical mains supply cables or where large inductive loads such as motors

or contactors are in close vicinity to the camera or its cable. It is also mandatory to use an

STP cable where the power device (like IP camera) is used outdoors or where the network

cable is routed outdoors.

Important Notice

Lantech Communications Global, Inc. reserves the right to modify the

equipment, its specification or this manual without prior notice, in the interest

of improving performance, reliability, or servicing. At the time of publication

all data is correct for the operation of the equipment at the voltage and/or

temperature referred to. Performance data indicates typical values related to

the particular product.

No part of this documentation or information supplied may be divulged to any

third party without the express written consent of Lantech Communications

Global Inc. Products offered may contain software which is proprietary to

Lantech Communications Global Inc. The offer or supply of these products

and services does not include or infer any transfer of ownership.

Interference Issues

This Equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

commercial or industrial installation. This equipment generates, uses, and

can radiate radio frequency energy. It may cause harmful interference to

radio communications if the equipment is not installed and used in

accordance with the instructions.

FCC Warning

This Equipment has been tested and found to comply with the limits for a

Class-A digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy. It may cause harmful interference to radio

communications if the equipment is not installed and used in accordance

with the instructions. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

Content

Chapter 1 Introduction ........................................... 5

Chapter 2 Hardware Description............................ 6

2.1 Physical Dimension....................................... 6

2.2 IP Protection................................................12

2.3 LED Indicators .............................................15

Chapter 3 Hardware Installation .......................... 17

Chapter 4 Network Application............................ 22

4.1 ITU G.8032 Scheme......................................22

4.2 Ring Coupling ...............................................22

4.3 Multiple Rings ...............................................23

4.4 Dual Homing.................................................24

4.5 Chain ............................................................24

Chapter 5 Console Management.......................... 26

5.1 Connecting to the Console Port....................26

5.2 Login in the Console Interface......................26

Chapter 1 Introduction

Model Description

IPES-5416DF series

16 10/100TX PoE at/af + 4 Dual Speed Fiber L2+EN50155

Managed IP67/IP54 Ethernet Switch w/ 8 or 16 PoE at/af

IPES-5216DF series

16 10/100TX PoE at/af + 2 Dual Speed Fiber L2+EN50155

Managed IP67/IP54 Ethernet Switch w/ 8 or 16 PoE at/af

IES-5416DF series

16 10/100TX PoE at/af + 4 Dual Speed Fiber L2+EN50155

Managed IP67/IP54 Ethernet Switch

IES-5216DF series

16 10/100TX PoE at/af + 2 Dual Speed Fiber L2+EN50155

Managed IP67/IP54 Ethernet Switch

Chapter 2 Hardware Description

In this paragraph, it will describe the Industrial switch’s hardware spec, port, cabling

information, and wiring installation.

2.1 Physical Dimension

IPES-5416DF

Aluminum case. IP-67,

285 (W) x 193 (D) x 91.2 (H) mm

Aluminum case. IP-54,

252 (W) x 179.5 (D) x 91 (H) mm

IES-5416DF

Aluminum case. IP-67,

285 (W) x 193 (D) x 91.2 (H) mm

Aluminum case. IP-54,

252 (W) x 179.5 (D) x 91 (H) mm

IPES-5216DF

Aluminum case. IP-67,

285 (W) x 201.4 (D) x 84.4 (H) mm

Aluminum case. IP-54,

285 (W) x 201.4 (D) x 84.4 (H) mm

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Lantech Changer

Lantech

Lantech IES-3416DSFP Manuel utilisateur

Lantech

Lantech IPGS-5400-2P Manuel utilisateur

Lantech

Lantech GE-800 Manuel utilisateur

Lantech

Lantech TPGS-L6216XT Manuel utilisateur

Lantech

Lantech IPES-0008A-12V Manuel utilisateur

Lantech

Lantech IPGS-0016 Manuel utilisateur

Lantech

Lantech IES-3 Series Manuel utilisateur

Lantech

Lantech IES-22812F-2P Manuel utilisateur

Lantech

Lantech IPGS-5008T Series Manuel utilisateur

Lantech

Lantech LES-2400-RPS Manuel utilisateur

Lantech

Lantech IPGS-0204DSFP-12V Manuel utilisateur

Lantech

Lantech Treo 500 Manuel utilisateur

Lantech

Lantech IES-5216DF Manuel utilisateur

Lantech

Lantech LGS-2816C-RPS Manuel utilisateur

Lantech

Lantech IES-2208C Manuel utilisateur

Lantech

Lantech IPGS-5 Series Manuel utilisateur

Lantech

Lantech IPES-5222T Series Manuel utilisateur

Lantech

Lantech IPES-5208T-X Series Manuel utilisateur

Lantech

Lantech IES-0008-M12 Manuel utilisateur

Lantech

Lantech IPWMR-3204DF Manuel utilisateur

Lantech

Lantech IES-2008 Manuel utilisateur

Lantech

Lantech IPES-3424DSFP-2P Manuel utilisateur

Lantech

Lantech IPES-0104GT-4 Manuel utilisateur

Lantech

Lantech IGS-2404 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur