La Crosse Technology 102819 Manuel utilisateur
ATOMIC DIGITAL CLOCK 1 | PAGE
ATOMIC DIGITAL WALL CLOCK
INSTRUCTION MANUAL
MODEL: 5131918B
DC: 102819
ATOMIC DIGITAL CLOCK 2 | PAGE
TABLE OF CONTENTS
3. Power Up
3. Custom Date Display
4. Settings Menu
5. Daylight Saving Time Options
5. Atomic Time
6. Time Alarm
•Set Alarm
•Activate/Deactivate Alarm
•Snooze Alarm
6. Outdoor Sensor Reception
7. Factory Restart
7. Low Battery Indicators
7. Sensor Weather Shield
7. We’re Here to Help!
7. Join the Conversation
8. Specifications
8. Care and Maintenance
8. Warranty Info
9. FCC Statement
ATOMIC DIGITAL CLOCK 3 | PAGE
POWER UP
1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert 3-AAA batteries into your Digital Clock.
3. Once the Outdoor Sensor is reading to your clock, place it outside in a shaded location to protect it from
the sun’s heat.
Watch sensor mounting video: bit.ly/TH_SensorMounting
AA
AA
Outdoor Sensor
TX191
Digital Clock
513-1918B
AAA
AAA
AAA
CUSTOM DATE DISPLAY
Choose to display the Full Weekday or Weekday with Month and Date.
Simply press the SET button to select you desire display.
ATOMIC DIGITAL CLOCK 4 | PAGE
SETTINGS
1. Hold the SET button to enter the Settings Menu.
2. Use the + or - button to adjust values.
3. Press the SET button to confirm and move to next item.
Settings Menu Order:
• Language English | Spanish
• Beep ON | OFF
• Atomic ON | OFF
• Daylight Saving Time
- DST AUTO ON (Gain 1 hour in spring, lose 1 hour in fall)
- DST OFF (Remain in Standard Time all year long)
- DST ON (Remain in Daylight Saving Time all year long)
• Time Zone
• Hour
• Minutes
• Year
• Month
• Date
• Fahrenheit | Celsius
Atomic OFF: When OFF is selected the next step will be the Hour setting.
Language: Whichever language is selected, the following instructions and weekday will be presented in that
language.
Weekday: Weekday will set automatically when Year, Month and Date are set.
TIME ZONES
AST = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacific
AKT = Alaska
HAT = Hawaii
LANGUAGE BEEP SOUND ON/OFF ATOMIC TIME SIGNAL ON/OFF
DAYLIGHT SAVING TIME TIME ZONE
ATOMIC DIGITAL CLOCK 5 | PAGE
ATOMIC TIME
HOUR MINUTES YEAR
MONTH DATE FAHRENHEIT/CELSIUS
• Your Clock will automatically search for the Atomic Time Signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press the PLUS (+) button to manually start or stop search for the WWVB Atomic Time Signal.
• While searching, the Tower Icon will flash. The Tower Icon will be solid when the WWVB Signal is
received by your clock.
• For information about WWVB Atomic Time visit: bit.ly/AtomicTime
DAYLIGHT SAVING TIME OPTIONS
Some states are considering going to year around Daylight Saving Time. We have built in options to
accommodate this feature into the program menu.
DST AUTO ON: Your clock will automatically move 1 hour ahead in the spring and move one hour back in
the fall when it receives the signal from the Atomic Clock to change.
DST OFF: This is for areas who do not move forward one hour in the spring. Select DST OFF to remain in
Standard Time all year.
DST ON: This is for areas who do not move backward one hour in the fall. Select DST ON to remain in
Daylight Saving Time all year.
ATOMIC DIGITAL CLOCK 6 | PAGE
TIME ALARM
Set Time Alarm
1. Hold the ALARM button 2 seconds to enter settings mode.
2. Press the + or - button to adjust the flashing values.
3. Hold the + or - buttons to adjust quickly.
4. Press the ALARM button to confirm adjustments and move to the next item.
5. Press the SNOOZE button at any time to exit.
Activate/Deactivate Time Alarm
• The alarm is active when set.
• From normal time display, press and release the ALARM button to deactivate or activate the alarm. The
alarm time will show for 2 seconds.
• Alarm icon (bell) will show then active.
Snooze Alarm
• When alarm sounds, press the SNOOZE button to silence alarm for 10 minutes.
• The alarm icon (bell) will flash
• Press any button except SNOOZE to silence the alarm for 24 hours
OUTDOOR SENSOR RECEPTION
• If sensor loses connection to the weather station for any reason, the weather station will show NO after 30
minutes.
• The weather station will search for 3 minutes every hour to reconnect with sensor.
• Hold the PLUS (+) button 3 seconds to search for the outdoor sensor.
• Reception Icon will flash while searching for sensor. Outdoor sensor area will show dashes during the
search.
• When sensor is received the icon will be solid.
• If no sensor received, the icon will disappear after 3 minutes of searching if sensor is not found. NO will
again show in the outdoor sensor area.
ATOMIC DIGITAL CLOCK 7 | PAGE
Factory Restart:
When the outdoor readings show NO and searching for the sensor has not helped, complete a full restart:
1. Bring the sensor in the house about five feet from the clock.
2. Remove batteries from the sensor, and from the clock
3. Press any button 20 times.
4. After 15 minutes, insert batteries into the sensor, and into the clock.
5. Wait another 15 minutes to establish a strong connection. Place sensor outside in shaded location.
FACTORY RESTART
SENSOR WEATHER SHIELD
• The Sensor Weather Shield (sold separately) is designed to protect your outdoor sensor
from rain and snow.
• This shield will oer limited protection from the sun’s heat.
• Optional purchase at: bit.ly/925-1418
If you require additional support, get in touch with our friendly customer support team based out of La
Crosse, WI.
Phone: 1-608-782-1610
Online: bit.ly/contact_techsupport
Our knowledgeable customer support team is available: Monday-Friday, 8am-6pm CST.
WE’RE HERE TO HELP!
JOIN THE CONVERSATION
LOW BATTERY INDICATORS
• A Low Battery Indicator between the Outdoor Temperature/Humidity means you need to replace the
batteries in your sensor.
• A Low Battery Indicator by the time means you need to replace the batteries in your station.
Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!
ATOMIC DIGITAL CLOCK 8 | PAGE
SPECIFICATIONS
CARE AND MAINTENANCE
• Do not mix old and new batteries.
• Do not mix Alkaline, Standard, Lithium, or Rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed with correct polarity (+ and -).
• Remove batteries from equipment which is not to be used for an extended period of time.
• Promptly remove expired batteries.
Indoor Temperature Range: 32°F to 122°F (0°C to 50°C)
Update Interval: About every minute.
Outdoor Temperature Range: -40°F to 140°F (-40°C to 60°C)
Transmission Range: Over 330 ft. (100 meters) RF 433MHz (open air)
Update Interval: About every minute.
Power Requirements:
513-1918B: 3 “AAA” batteries (sold separately)
TX191: 2 “AA” batteries (sold separately)
Battery Life:
513-1918B: Over 18 months
TX191: Over 18 months
Dimensions:
513-1918B: 8.97” W x 0.94” D x 7.12” H (22.78 W x 2.38 D x 18.08 H cm)
TX191: 1.57” W x 0.95” D x 4.49” H (3.98 L x 2.41 W x 11.40 H cm)
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product
relating to manufacturing defects in materials & workmanship.
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
WARRANTY INFO
ATOMIC DIGITAL CLOCK 9 | PAGE
FCC STATEMENT
WARRANTY INFO
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to
manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd.
2830 S. 26th St.
La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
CARE + MAINTENANCE
•Do not mix old and new batteries.
•Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
•Always purchase the correct size and grade of battery most suitable for intended use.
•Clean the battery contacts and also those of the device prior to battery installation.
•Ensure the batteries have with correct polarity (+ / -).
•Remove batteries from equipment that will not to be used for an extended period.
•Promptly remove expired batteries.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic,
mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in
subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All trademarks
and patents are recognized.
WARNING: This product can expose you to chemicals including styrene, which is known to the State of
California to cause cancer. For more information go to: www.P65Warnings.ca.gov
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels La Crosse Technology Horloge
La Crosse Technology
La Crosse Technology 513-1429 Dimensions
La Crosse Technology
La Crosse Technology 404-3840CA Manuel utilisateur
La Crosse Technology
La Crosse Technology WT-8005U Dimensions
La Crosse Technology
La Crosse Technology W86111V2 Manuel utilisateur
La Crosse Technology
La Crosse Technology 616-1410B Manuel utilisateur
La Crosse Technology
La Crosse Technology 404-1946 Dimensions
La Crosse Technology
La Crosse Technology BBB87740x1 Manuel utilisateur
La Crosse Technology
La Crosse Technology 513-1429TH Dimensions
La Crosse Technology
La Crosse Technology BBB86118v3 Manuel utilisateur
La Crosse Technology
La Crosse Technology WS-8418U-IT Manuel utilisateur
La Crosse Technology
La Crosse Technology 513-1429THV2 Dimensions
La Crosse Technology
La Crosse Technology WT-3129BX1 Dimensions
La Crosse Technology
La Crosse Technology WS-8236U-AL Manuel utilisateur
La Crosse Technology
La Crosse Technology W86111V2 Manuel utilisateur
La Crosse Technology
La Crosse Technology 513-1211 Dimensions
La Crosse Technology
La Crosse Technology WT-8002U Manuel utilisateur
La Crosse Technology
La Crosse Technology BBB85395 Manuel utilisateur
La Crosse Technology
La Crosse Technology WT-8112U Manuel utilisateur
La Crosse Technology
La Crosse Technology C86279v4 Manuel utilisateur
La Crosse Technology
La Crosse Technology 616-12667-INT Manuel utilisateur
Manuels Horloge populaires d'autres marques
Silicon Laboratories
Silicon Laboratories SI5324 Manuel utilisateur
Heathkit
Heathkit GC-1005 Manuel utilisateur
Oregon Scientific
Oregon Scientific PRYSMA RMR221P Manuel utilisateur
Andrew O'Malley
Andrew O'Malley DOTKLOK Manuel utilisateur
ALGE-Timing
ALGE-Timing ASC3 Manuel utilisateur
Bodet
Bodet Profil 960 Manuel utilisateur
