La Crosse Technology BBB87733 Manuel d'utilisation et d'entretien

Model: BBB87733

Instructional Manual

DC: 100615

Atomic Digital Wall Clock

Welcome ...........................................................................

Get Started ........................................................................

Settings: Time, Date, etc. ....................................................

Fahrenheit/Celsius & Time Zone Settings ...............................

Set Time Alarm ..................................................................

Activate/Deactivate Alarm ....................................................

Snooze ..............................................................................

Reset Button ......................................................................

Care and Maintenance .........................................................

Warranty & Support ............................................................

Specifications .....................................................................

FCC Statement ...................................................................

Canada Statement ..............................................................

Table of Contents

Welcome!

Thank you for purchasing the Atomic Digital Wall Clock, designed for

years of trouble free performance. Please read this important note

about setup. Thank you!

IMPORTANT:

After installing batteries, the clock will look for the Atomic time signal

for 7 minutes. The buttons will not function during the signal search.

Options:

• Hold the WWVB SEARCH button for 3 seconds to stop the Atomic

signal search.

• Manually set the time, date, and time zone.

• The clock will search for the Atomic time signal again after

midnight.

• Press WWVB SEARCH button anytime, to start an Atomic signal

search.

For information about Atomic Time, visit:

www.nist.gov/pml/div688/grp40/wwvb.cfm

Get Started

1. Insert 2 new AAA, Alkaline batteries into the clock. Observe the

correct polarity.

2. Wait for the clock to set itself to Pacic time zone (default) then

press the ZONE button to select your time zone.

3. Stop the initial Atomic Time Search and set the time manually.

Page 1 www.lacrossetechnology.com/support BBB87333

AAA

Settings: Time, Date, etc.

• Hold the SET button to enter time set mode.

• Press the or buttons to adjust values.

• Press SET to conrm adjustments and move to next item.

Settings order:

1.12/24 Hour Format, 2. Hour, 3. Minutes, 4. Year, 5. Month,

6. Date, 7. Daylight Saving Indicator (ON to automatically change)

Press SET to exit, or wait 30 seconds without pressing buttons to

return to the normal time display.

12/24 Hour Time Format

AM P

DST

Set Hour and Minutes

Set Year, Month, & Date

Daylight Saving Time Indicator

BBB87333 www.lacrossetechnology.com/support Page | 2

Choose Fahrenheit/Celsius

Select Time Zone

Fahrenheit/Celsius & Time Zone Settings

PPM

• Press the ºF/ºC button to switch from Fahrenheit to Celsius

temperature display.

• This clock has four time zones to choose from.

• The default time zone is Pacic (P)

• Press the ZONE button to select your time zone.

o P = Pacic

o M= Mountain

o C = Central

o E = Eastern

Set Time Alarm

1. Hold the ALARM button for 3 seconds until the seconds are

replaced by the letters “AL”.

2. The alarm hour will ash.

3. Use the / buttons to set the hour. Press the ALARM button once.

4. The alarm minutes will ash,

5. Use the / buttons the set the minutes.

6. Press the ALARM button to conrm and exit.

PAM

Page 3 www.lacrossetechnology.com/support BBB87333

Activate/Deactivate Alarm

Setting the alarm time and activating the alarm are separate steps.

1. Press the ALARM button to enter alarm mode.

2. In alarm mode, press and release the to activate or deactivate

the time alarm.

3. The alarm icon (bell) will appear when active.

4. The alarm icon (bell) will disappear when inactive.

Snooze

• Press SNOOZE to silence an active alarm for 5 minutes.

• The alarm icon will ash.

• This is a crescendo alarm that will sound for 120 seconds unless

deactivated.

• Press any button to stop the alarm for 24 hours.

Reset Button

• If the atomic clock display appears distorted or is not responding to

buttons, use a pen or paper clip to press RESET one time.

• This will reset the atomic clock to default settings.

•Do not mix old and new batteries.

•Do not mix Alkaline, Standard, Lithium, or Rechargeable batteries.

•Always purchase the correct size and grade of battery most suitable for

intended use.

•Replace all batteries of a set at the same time.

•Clean the battery contacts and also those of the device prior to battery

installation.

•Ensure the batteries are installed with correct polarity (+ and -).

•Remove batteries from equipment which is not to be used for an extended

period of time.

•Promptly remove expired batteries.

Care and Maintenance

BBB87333 www.lacrossetechnology.com/support Page | 4

La Crosse Technology, Ltd. provides a 1-year limited time warranty

(from date of purchase) on this product relating to manufacturing

defects in materials & workmanship.

Before returning a product, please contact our friendly

customer support with questions or visit our online help:

Phone: 1-608-782-1610

Online Product Support:

www.lacrossetechnology.com/support

Product Registration:

www.lacrossetechnology.com/support/register

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

Warranty Address:

La Crosse Technology, Ltd

2830 S. 26th St.

La Crosse, WI 54601

Protected under U.S. Patents:

5,978,738 | 6,076,044 | RE43903

Warranty and Support

Specications

Indoor • Temperature Range: 32°F to 122°F (0°C to 50°C)

• 2-AAA, IEC, LR3 batteries (not included)

Battery Life • 24 months with reputable batteries brands

Dimensions

• Humidity Range: 20%RH to 95%RH

• 8.66” W x 1.10” D x 6.69” H

(220.04 W x 27.94 D x 169.92 H mm)

Power

Page 5 www.lacrossetechnology.com/support BBB87333

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with

any other antenna or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference

caused by unauthorized modications to this equipment. Such

modications could void the user authority to operate the equipment.

even in part, or duplicated or processed using electronic, mechanical

or chemical process without the written permission of the publisher.

This booklet may contain errors or misprints. The information it

contains is regularly checked and corrections are included in

subsequent editions. We disclaim any responsibility for any technical

error or printing error, or their consequences.

All trademarks and patents are recognized.

FCC Statement

BBB87333 www.lacrossetechnology.com/support Page | 6

This device complies with Industry Canada’s license-exempt RSSs.

Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference

that may cause undesired operation of the device.

Canada Statement

Page 7 www.lacrossetechnology.com/support BBB87333

Table des matières

Autres manuels La Crosse Technology Horloge

La Crosse Technology

La Crosse Technology 404-3840MA Manuel utilisateur

La Crosse Technology

La Crosse Technology 515-1419 Dimensions

La Crosse Technology

La Crosse Technology 404-3840FL Manuel utilisateur

La Crosse Technology

La Crosse Technology 513-1417v6 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8120U Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8157U-A Manuel utilisateur

La Crosse Technology

La Crosse Technology WT-3126B Manuel

La Crosse Technology

La Crosse Technology WT-3181PL 1 Series Manuel utilisateur

La Crosse Technology

La Crosse Technology 404-1235UA-PL Manuel utilisateur

La Crosse Technology

La Crosse Technology BBB87276 Manuel utilisateur

La Crosse Technology

La Crosse Technology WT-8002U Manuel utilisateur

La Crosse Technology

La Crosse Technology 512A-811 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8236U Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-7038U Manuel utilisateur

La Crosse Technology

La Crosse Technology 515-1912 Dimensions

La Crosse Technology

La Crosse Technology 102819 Manuel utilisateur

La Crosse Technology

La Crosse Technology 513-1211 Manuel utilisateur

La Crosse Technology

La Crosse Technology 513-1417V2 Dimensions

La Crosse Technology

La Crosse Technology WT-3143A Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8256-AL Manuel utilisateur

La Crosse Technology

La Crosse Technology 513-1311OT Dimensions

La Crosse Technology

La Crosse Technology WT-3102S Dimensions

La Crosse Technology

La Crosse Technology 515-1419 Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-6003U Manuel utilisateur

Manuels Horloge populaires d'autres marques

Silicon Laboratories

Silicon Laboratories SI5324 Manuel utilisateur

Heathkit

Heathkit GC-1005 Manuel utilisateur

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manuel utilisateur

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuel utilisateur

ALGE-Timing

ALGE-Timing ASC3 Manuel utilisateur

Bodet

Bodet Profil 960 Manuel utilisateur

Nixie Clock

Nixie Clock Divergence Meter Manuel utilisateur

Mini Gadgets

Mini Gadgets MCPro Manuel utilisateur

Casio

Casio TMR-200 Manuel utilisateur

Progetti

Progetti ILTEMPOSTRINGE Manuel

BVItech

BVItech BV-101 Manuel utilisateur

Progetti

Progetti KALIMERO Manuel

Sharp

Sharp SPC900 Manuel utilisateur

Datexx

Datexx DF0063 Manuel utilisateur

LG LEC-005 Manuel utilisateur

IKEA

IKEA ROTBLÖTA Manuel utilisateur

U-Line

U-Line Н-2811 Manuel utilisateur

Digiview

Digiview RC305EL Manuel utilisateur