La Crosse Technology LTV-W2 Manuel utilisateur
Wind Speed Sensor
Features
• Wind speed
• Replaceable wind cups
• Blue LED flashes with each transmission
1. Twist battery cover left to remove from sensor.
2. Insert two “C” batteries into the LTV-W1 sensor
Power
Wind Cups
Air Vents
Battery cover
Blue LED
Model: LTV-W2
DC: 101420
Replace Wind Cups
1. Loosen the screw on side of cups
2. Remove cups
3. Install new cups
4. Tighten screw on flat side of stem
Specications
• Wind Speed Range: 0 - 99 mph (0-159 kMh)
• Transmission Range: 400 ft (121 m) RF 433MHz open air
• Batteries: 2-C, IEC, LR14 batteries (not included)
• Battery Life: over 24 months with reputable batteries
• Dimensions: 7.10” L x 7.10” W x 18.57” H
(18.03cm L x 18.03cm W x 47.17cm H)
Flat Side Of
Stem Up
Insert and Attach
Flat End up
• For the most accurate wind speed readings, mount the LTV-W2
sensor as the highest object for 50 feet in all directions.
• Cups should be on the top of the sensor. Mount vertically.
• The maximum wireless transmission range to the wind station is
over 400 feet (121 meters) in open air, not including walls or trees.
1. Insert mounting pole into sensor.
2. Tighten screws
3. Insert bottom of pole into mounting bracket
4. Tighten knob to secure
5. Use screws through the bottom of the mounting bracket to attach.
6. The sensor can be mounted from the bottom or side.
Alternatively:
1. Insert your own mounting pole into the sensor.
2. Tighten screws
3. Mounting bracket would not be used.
Note: Do not attempt to insert a pole into the hollow back of the
mounting bracket.
Position Wind Sensor
Sensor ID
Standalone station:
Your sensor has a bar code and ID number. This ID number locks your sensor into
your station. Follow the instructions in your station manual to delete the sensor ID
for sensor replacement.
La Crosse View™ compatible system:
The sensor ID and bar code are recognized by the La Crosse View™ app if you are using
this sensor as an add-on to your existing La Crosse View™ compatible system.
To add this sensor to your existing La Crosse View™ compatible system:
1. Open your La Crosse View™app to add sensors.
2. From Main Menu - select “Devices” under “Add/Edit”
3. On Edit Devices page - select “ADD DEVICE”
4. Scan Device ID - Scan the bar code on your sensor or press inside the Device ID search box to enter
your code manually. Once entered, select “Search”.
5. On Confirm Device page - Confirm the sensor image and model number are correct and select “YES”
6. On Enter Device and Location Names page - enter Device Name and select a location or enter
a Location Name for your sensor. Select “DONE”.
Note: This sensor cannot connect to the La Crosse View app without a La Crosse View compatible
station. Station’s that are La Crosse View compatible have built-in Wi-Fi capabilities that send your
sensor’s data to the La Crosse View app. For more information about our new connected stations visit:
http://www.lacrossetechnology.com/products/connected
JOIN THE CONVERSATION
Follow us on our social media outlets for the latest promotions, product support, and awesome
giveaways.
Let’s Be Social!
If you have ideas for features or support solutions you’d like to see us make, please let us know! We tru-
ly want to make owning a La Crosse Technology product not only a practical experience, but also a fun
one. So email us at: store@lacrossetechnology.com
Help Us, Help You!
Warranty and Support
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this
product relating to manufacturing defects in materials & workmanship.
Before returning a product, please contact our friendly customer support or visit our online help:
Phone: 1-608-782-1610
Online: www.lacrossetechnology.com/support/
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic,
mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included
in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All
trademarks and patents are recognized.
WARNING: This product can expose you to chemicals including styrene, which is known to the State of
California to cause cancer. For more information go to: www.P65Warnings.ca.gov
Ce manuel convient aux modèles suivants
1
Autres manuels La Crosse Technology Accessoires
La Crosse Technology
La Crosse Technology LTV-THP1-T1 Manuel utilisateur
La Crosse Technology
La Crosse Technology TX-23U Manuel utilisateur
La Crosse Technology
La Crosse Technology WCLTV-WSDR1 Manuel utilisateur
La Crosse Technology
La Crosse Technology D000.104 Manuel utilisateur
La Crosse Technology
La Crosse Technology CA82738-1 Manuel utilisateur
La Crosse Technology
La Crosse Technology Alerts TX60U-IT Manuel utilisateur
La Crosse Technology
La Crosse Technology LTV-POOLv2 Manuel utilisateur
La Crosse Technology
La Crosse Technology TX141-Bv2 Manuel utilisateur
La Crosse Technology
La Crosse Technology LTV-WR1 Manuel utilisateur
La Crosse Technology
La Crosse Technology TX15U Manuel utilisateur
La Crosse Technology
La Crosse Technology TX10U Manuel utilisateur
La Crosse Technology
La Crosse Technology BREEZE PRO SENSOR Manuel utilisateur
La Crosse Technology
La Crosse Technology TX60U-IT Manuel utilisateur
La Crosse Technology
La Crosse Technology TX7U Manuel utilisateur
La Crosse Technology
La Crosse Technology TX23U Manuel utilisateur
La Crosse Technology
La Crosse Technology 925-1418 Manuel utilisateur
La Crosse Technology
La Crosse Technology CYCLONE PRO SENSOR Manuel utilisateur
La Crosse Technology
La Crosse Technology Breeze Pro LTV-WSDTH03 Manuel utilisateur
La Crosse Technology
La Crosse Technology TX24U Manuel utilisateur
La Crosse Technology
La Crosse Technology TX8U Manuel utilisateur
