Kyocera Mita Ecosys FS-C8008DN Series Manuel utilisateur

FS-C8008N

FS-C8008DN

Color Laser Printer

Quick Reference Guide

Kyocera Mita Corporation

2-28, 1-Chome, Tamatsukuri, Chuo-ku

Osaka 540-8585, Japan

Phone: (06) 6764-3555

2002.12

2CK80020A

Printed in Japan

FS-C8008N

Notice

NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY

IMPROPER INSTALLATION OF THE PRODUCT.

SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE

PRINTER’S NATIVE MODE OR ONE OF ITS EMULATION

MODES.

The information in this manual is subject to change without notifi-

cation. Additional pages may be inserted in future editions. The

user is asked to excuse any technical inaccuracies or typographi-

cal errors in the present edition.

No responsibility is assumed if accidents occur while the user is

following the instructions in this manual. No responsibility is

assumed for defects in the printer’s firmware (contents of its read-

only memory).

This manual, any copyrightable subject matter sold or provided

with or in connection with the sale of the page printer, are pro-

tected by copyright. All rights are reserved. Copying or other repro-

duction of all or part of this manual, any copyrightable subject

matter without the prior written consent of Kyocera Mita Corpora-

tion is prohibited. Any copies made of all or part of this manual,

any copyrightable subject must contain the same copyright notice

as the material from which the copying is done.

The names of actual companies and products mentioned herein

may be the trademarks of their respective owners.

Fsc8008q.fm 0 ページ２００２年１２月１１日　水曜日　午後２時３９分

FS-C8008N

FS-C8008DN

Quick Reference

Guide

Fsc8008q.fm 1ページ２００２年１２月１１日　水曜日　午後２時３９分

Contents

Guide to the information about the printer .................................3

Understanding the Error Messages ...........................................4

Loading Paper .........................................................................14

Clearing Paper Jams ...............................................................18

[Paper Jam — Right Cover #] .....................................19

[Paper Jam — Cassette #] ..........................................19

[Paper Jam — MP Tray] .............................................20

[Paper Jam — Duplexer] .............................................20

[Paper Jam — Paper Transfer Unit] ............................21

[Paper Jam — Left Cover] ..........................................26

[Paper Jam — Option Stacker/Finisher/Sorter] ...........27

Toner Container Replacement ................................................28

Replacing the Toner Container ...................................29

Replacing the Waste Toner Box .................................31

Cleaning the Printer .................................................................33

Cleaning the Paper Transfer Unit ...............................33

Cleaning the Main Charger Unit ..................................35

Fsc8008q.fm 2 ページ２００２年１２月１１日　水曜日　午後２時３９分

Guide to the information about the printer

The following documentation and CD-ROM are sup-

plied:

Installation Guide This guide provides information on installing

the printer and other options before starting

to use.

Quick Reference

Guide (This bro-

chure)

This guide provides common information

about the printer such as loading paper,

understanding messages, etc. This guide can

be retained in the plastic pocket at the printer.

Operation Guide This guide is supplied as an online manual

(PDF) in the CD-ROM. This guide fully details

the information on the printer features, hard-

ware, troubleshooting, printer driver handling,

etc.

KX Printer Drivers

Operation Guide

This guide is supplied as an online manual

(PDF) in the CD-ROM. This guide explains

how to install and configure the printer driver.

Software and Docu-

ment CD-ROMs

These CDs include the printer software for

Kyocera Mita printers such as printer drivers,

network printer monitors, and various soft-

ware utilities. Also, these CDs include the

Operation Guides and other documents.

Web site The latest versions of printer drivers and utili-

ties are available for downloading at:

http://www.kyoceramita.com/download/

Fsc8008q.fm 3 ページ２００２年１２月１２日　木曜日　午後１時４４分

Understanding the Error Messages

These messages appear on the printer’s message dis-

play when the printer needs the operator’s attention.

For more details, refer to chapter 4 of the Operation

Guide.

Message Corrective Action

Add paper MPTray

The paper has run out in the paper source

displayed. Supply paper according to the

paper source displayed (paper cassettes,

MP tray, or optional paper feeders).

This message is displayed alternately with

messages indicating the printer status,

such as, Ready, Please wait, Pro-

cessing, Waiting, and Form Feed

Time Out. If the number of copies to

print is 2 or more, only the Add paper

message is displayed.

Add staples

Press GO

The optional document finisher has run out

of staples. Replenish staples and press

the GO key.

Call service

####:0123456

#### represents a mechanical error (#=0,

1, 2, ...). Call a service. The printer does

not operate when this message is dis-

played. The total number of pages printed

is also indicated, e.g. 0123456.

Call service

F###:

F### represents a controller error (#=0, 1,

2, ...). Call a service. The printer does not

operate when this message is displayed.

Call service

Person F0

This message means an error in data

communications between the printer con-

troller and the operator panel. Call a ser-

vice.

Fsc8008q.fm 4 ページ２００２年１２月１１日　水曜日　午後２時３９分

Cassette #

not loaded

The corresponding paper cassette is not

installed. Install the cassette. The cassette

number can be 1 (topmost) to 6 (bottom);

and for the DN model, 2 to 6.

Check waste

toner box

This message warns following two cases.

Install the new waste toner box.

• The waste toner box is not installed.

• The waste toner box is almost full.

finisher cover

The optional document finisher (DF-31)

cover is open. Close the cover.

front cover

The front cover is open. Close the front

cover.

left cover

The left cover of the printer is open. Close

the printer left cover.

right cover #

The right cover of paper feeder is open.

Close the cover of the paper feeder 1 (top-

most) to 3 (bottom) as displayed in place

of #.

sorter cover

The optional sorter (SO-30) cover is open.

Close the cover.

stacker cover

The optional bulk stacker (ST-30) cover is

open. Close the cover.

Duplex disabled

Press GO

You attempted to print with a paper size

and paper type that cannot be used for

duplex printing. Press the GO key to print

onto one-side of the paper only.

Message Corrective Action

Fsc8008q.fm 5 ページ２００２年１２月１１日　水曜日　午後２時３９分

Duplex drawer

not loaded

The duplex drawer is not installed. Install

the duplex drawer. This message is appli-

cable to the DN model.

Face-down tray

paper full

The face-down tray has become full

(approx. 500 pages). You must remove all

printed pages from the face-down tray.

When the printer detects that the face-

down tray is empty again, the printer will

continues printing into the face-down tray.

Face-up tray

path error

The face-up tray is not open although you

have attempted to print in the face-up tray.

Open the face-up tray.

File not found

Press GO

You have attempted to print a job that is

not contained in the specified virtual mail-

box, or the specified virtual mailbox is not

found.

If Auto Continue is set to On, printing will

be automatically resumed after a preset

period of time. For details on Auto Con-

tinue, refer to chapter 3 of the Operation

Guide.

Finisher tray ##

paper full

The optional document finisher (DF-31)

tray is full. Remove all printed pages from

the tray.

Finisher

path error

The optional document finisher (DF-31) is

not installed properly. Correct the installa-

tion by referring to the instructions sup-

plied with the document finisher.

Format error

Memory Card

The memory card inserted in the printer is

not formatted, and therefore cannot be

read or written. To format a memory card,

follow the procedure in chapter 3 of the

Operation Guide.

Message Corrective Action

Fsc8008q.fm 6 ページ２００２年１２月１１日　水曜日　午後２時３９分

Format error

Hard disk

The hard disk installed in the printer is not

formatted, and therefore cannot be read or

written. To format the hard disk, follow the

procedure in the Installation Guide of the

hard disk.

Hard disk err

Press GO

A hard disk error has occurred. Look at the

error code given in place of ## and refer to

chapter 4 of the Operation Guide. To ignore

the hard disk error, press the GO key.

I/F occupied

This message is displayed when you

attempt to use the printer’s operator panel

to change the environmental settings on

the interface from which data are presently

being received.

ID error

The user ID entered for a private job, or a

stored job is not correct. Check the user ID

that you specified on the printer driver.

Incorrect slot

Please reinstall

The optional hard disk is installed in the

network interface card slot (OPT) in the

printer.

The optional network interface card is

installed in the hard disk slot (HDD) in the

printer.

Install it in the appropriate slot.

Insert the same

memory card

You have inserted the wrong memory card

when the Insert again message was

displayed. Remove the wrong memory

card from the printer’s memory card slot

and insert the correct memory card. The

printer again reads it from the beginning of

the data.

Message Corrective Action

Fsc8008q.fm 7 ページ２００２年１２月１１日　水曜日　午後２時３９分

Install MK

[A]

†

Replace Maintenance Kit A which is dis-

played on your printer message window.

Replacement of the maintenance kit is

necessary at every 600,000 images of

printing and requires professional servic-

ing. Contact your Kyocera Mita dealer.

Install MK

[B]

†

Replace Maintenance Kit B. Replacement

of the maintenance kit B is necessary at

every 300,000 pages of printing and

requires professional servicing. Contact

your Kyocera Mita dealer.

Install MK

[C]

†

Replace Maintenance Kit C. Replacement

of the maintenance kit C is necessary at

every 300,000 images of printing and

requires professional servicing. Contact

your Kyocera Mita dealer.

KPDL error ##

Press GO

Current print processing cannot continue

because of occurrence of KPDL error

which is categorized by ##. To print out an

error report, display > Print KPDL

err(s) from the menu system, and select

On. Press the GO key to resume printing.

You can abandon printing by the CANCEL

key.

If Auto Continue is set to On, printing will

be automatically resumed after a preset

period of time.

Message Corrective Action

Fsc8008q.fm 8 ページ２００２年１２月１１日　水曜日　午後２時３９分

Autres manuels pour Ecosys FS-C8008DN Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kyocera Mita Imprimante

Kyocera Mita

Kyocera Mita FS-6750 Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-6020 Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-C5016N Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-3700 Manuel utilisateur

Kyocera Mita

Kyocera Mita DP-2800 Manuel

Kyocera Mita

Kyocera Mita KM-4530 Manuel utilisateur

Kyocera Mita

Kyocera Mita KM-P4850w Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-9100DN Manuel utilisateur

Kyocera Mita

Kyocera Mita FS 8000C - Color Laser Printer Manuel utilisateur

Kyocera Mita

Kyocera Mita KM-1505 Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-8000CD Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-6020 Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-C5016N Manuel utilisateur

Kyocera Mita

Kyocera Mita KM-1500 Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-C5016N Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-C5016N Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-1800+ Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-1800N Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-9500DN Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-1800+ Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-1010 Manuel utilisateur

Kyocera Mita

Kyocera Mita WP31C Manuel utilisateur

Kyocera Mita

Kyocera Mita FS-C5016N Manuel utilisateur

Kyocera Mita

Kyocera Mita Ecosys FS-C8008DN Series Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur