KTI Networks KS-105F-B Series Manuel utilisateur

-1-

InstallationGuide

10/100 Fast Ethernet Switch

with 100FX Connectivity

KS-105F-BSeries

DOC.111122-KS105FB

-2-

tation may be reproduced in any form or by any means or used to make

any directive work (such as translation or transformation) without per-

missionfromKTINetworks Inc.

KTI Networks Inc. reserves the right to revise this documentation and to

make changes in content from time to time without obligation on the part

of KTI Networks Inc. to provide notification of such revision or change.

For more information, contact:

UnitedStates KTINetworksInc.

P.O.BOX631008

Houston,Texas77263-1008

Phone: 713-2663891

Fax: 713-2663893

E-mail: [email protected]

WWW: http://www.ktinet.com/

International Fax: 886-2-26983873

E-mail: [email protected]

WWW: http://www.ktinet.com.tw/

-3-

The information contained in this document is subject to change without

TRADEMARKS

Ethernet is a registered trademark of Xerox Corp.

FCC NOTICE

This device complies with Class B Part 15 the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received including the interference that may cause.

CE NOTICE

Marking by the symbol indicates compliance of this equipment to

the EMC directive of the European Community. Such marking is indica-

tive that this equipment meets or exceeds the following technical stan-

dards:

EMC Class B

EN 50081-1/1992 : EN55022, EN61000-3-2, EN61000-3-3

EN 50082-1/1998 : EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,

EN61000-4-6, EN61000-4-8, EN61000-4-11

-4-

Table of Contents

1. Introduction ..................................................................5

1.1 Features...........................................................................................6

1.2 Specifications ..................................................................................7

2. InstallingtheSwitch .....................................................9

2.1 Unpacking .......................................................................................9

2.2 CheckingAC Power.........................................................................9

2.3 Installing the Switch...................................................................... 10

3. MakingNetworkConnections ..................................11

3.1 Switched Ports ............................................................................... 11

3.2 Making UTP Connections ............................................................. 11

3.3 Making Fiber Connection.............................................................. 12

4. LEDIndicators ...........................................................14

4.1 LEDPanel....................................................................................... 14

4.2 Interpretation................................................................................. 14

-5-

1. Introduction

This 5-port Fast Ethernet switch series provides four 10/100 TP ports and

one 100BASE-FX fiber port, each capable of transmitting or receiving

information simultaneously at full wire speed to control and allocate the

network bandwidth.

The key features of the switch series are:

•OptimizedBandwidth:Combiningfive100Mbps-basedFast

Ethernet switched ports, the switch delivers a high network

bandwidth for your Fast Ethernet network

•Easy Migration :With 10BASE-Tsupport on each port, the switch

provides a non-disruptive and smooth migration path from

Ethernet to a Fast Ethernet network.

•FiberUplink Support : With 100BASE-FX port, the switch provides

a connectivity to a Fast Ethernet network via fiber cable.

•Easy Installation : With the functions of auto-speed-sensing and

auto-negotiation on each port, the switch supports plug-and-play

installation which eliminates configuration problems.

-6-

1.1 Features

Designed for resolving congestion problems caused by bandwidth-hun-

gry devices and bandwidth-intensive applications as well as a high num-

ber of users, the switches not only adhere to the IEEE 802.3 10BASE-T,

802.3u100BASE-TXand100BASE-FXstandards,butalsofeature:

• Four 10/100BASE-TX auto-negotiation switched ports and one

100BASE-FX port for flexible connections to desktop PCs, servers

and Fast Ethernet devices.

• The 10/100BASE-TX switched ports support:

- auto-negotiation with auto-negotiation devices

- full-duplexorhalf-duplexoperation

- automatic MDI/MDI-X configuration

• For the 100BASE-FX fiber port, the switch series support variety of

fiber connectors for different application needs. The fiber connec-

tors include ST, SC, MT-RJ, and VF-45 types for multimode and

single mode fiber cables.

• Supports duplex mode selector for the 100BASE-FX fiber port.

• Self learning for active MAC addresses and address aging

• Store and forward switching to ensure only good packets are forwarded

• Forwarding and filtering at full wire speed

• SupportsIEEE802.3xflowcontrolfor full-duplex operation

• Supports back-pressure flow control for half-duplex operation

• Comprehensive LED indicators provide quick, easy to read port

and switch information

-7-

1.2 Specifications

10/100 Ports IEEE802.310BASE-T,IEEE802.3u100BASE-TXstd.

Shielded RJ-45 jacks with Auto MDI-X detection

Auto-negotiation capable

Speed for 10Mbps or 100Mbps

Full-duplex or half-duplex mode support

100FXPort IEEE802.3u100BASE-FXcompliant

Fixed 100Mbps operation

Duplexmodeselector-fullduplexorhalfduplex

Flowcontrol IEEE 802.3x pause packet for full duplex operation

Back-pressure for half duplex operation

Cables 10BASE-TCat.3, 4, 5orhigher(100 metersmax.)

100BASE-TX Cat. 5, 5e or higher (100 meters max.)

100BASE-FXmultimodeorsingle mode fiber cable

LEDindicators Power status

Perport: Speed, Link,Activity,Duplex,Collisionstatus

Forwardingrate 14,880 pps for Ethernet (10M)

148,800ppsforFastEthernet(100M)

Filteringaddress Multicast/Broadcast/Unicast address

MACaddress 2K entries

Agingtime 280 seconds

Environment Temperature 0oCto40oC

Relativehumidity 10% to 90% non-condensing

(*The operating temperature range of the bundled power

adaptermay differfromthetemperaturerangeofthemain

device.)

Dimensions 144mmx104.5mmx26mm(WxDxH)

5.67x 4.11x 1.02inch

DCINJack D6.3mm D2.0mm

DCINvoltage Operating +5V~+12VDC (+/-5%)

-8-

Consumption DC input power consumption 3W @+5V

100FX Port Fiber Specifications

Model: KS-105FB

Duplex Series

Model Ext Fiber Wavelength Tx Power Sens. Ref.Distance

-T ST MMF1310nm -20 ~ -14dBm -32dBm 2km

-C SC MMF1310nm -20 ~ -14dBm -31dBm 2km

-JM MT-RJ MMF1310nm -19 ~ -14dBm -31dBm 2km

-VM VF-45 MMF1310nm -20 ~ -14dBm -31dBm 2km

-SA2 SC SMF 1310nm -15 ~ -8dBm -31dBm 20km

-SL2 SC SMF 1310nm -15 ~ -8dBm -32dBm 20km

-SL3 SC SMF 1310nm -15 ~ -8dBm -34dBm 30km

-SL4 SC SMF 1310nm -5 ~ 0dBm -34dBm 40km

-SL6 SC SMF 1310nm -5 ~ 0dBm -35dBm 60km

-SL7 SC SMF 1310nm -3 ~ +3dBm -37dBm 70km

-SL9 SC SMF 1310nm 0 ~ +5dBm -37dBm 90km

-SL10 SC SMF 1550nm -3 ~ +3dBm -37dBm 100km

-SL12 SC SMF 1550nm 0 ~ +5dBm -37dBm 120km

Ref. Distance : reference distance when operating on full duplex mode

MMF : Multimode fiber - 62.5/125μm, 50/125μm

SMF : Single Mode fiber - 9/125μm

Single Fiber Bi-Di WDM Series

Model Ext. Fiber Wavelength Tx Power Sens. Ref.Distance

-W3515 SC SMF Tx1310nm-14 ~ -8dBm -31dBm 15-20km

Rx 1550nm

-W5315 SC SMF Tx1550nm-14 ~ -8dBm -31dBm 15-20km

Rx 1310nm

-W3540 SC SMF Tx1310nm-8 ~ 0dBm -34dBm 40km

Rx 1550nm

-W5340 SC SMF Tx1550nm-8 ~ 0dBm -34dBm 40km

Rx 1310nm

Single Mode CWDM Series

Model Ext. Fiber Wavelength Tx Power Sens. Ref.Distance

-CxxW40 SC SMF Tx 1xx0nm -5 ~ 0dBm -35dBm 40km

Rx 1100-1650nm

-CxxW80 SC SMF Tx 1xx0nm 0 ~ +5dBm -37dBm 80km

Rx 1100-1650nm

Tx 1xx0nm : 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610nm

-9-

2. Installing the Switch

2.1 Unpacking

Check to see that you have everything before you start the installation.

• Installation guide

• The switch unit

• OneAC power adapter for the unit

2.2 Checking AC Power

Before you begin the installation, check theAC voltage of your area. The

ACpoweradapter whichisusedto supplytheDCpower fortheunit should

have the AC voltage matching the commercial power voltage in your area.

The specifications of the AC power adapter are:

• AC input power: AC power voltage of your area

• DC output power: Rating options: +7.5V1A,+5V1A min.

• DC plug type:

-10-

TheDC power jack for theAC power adapter is located on the rear of the

switch as shown below:

2.3 Installing the Switch

1. Install the switch with the AC power adapter provided.

2. Connect the power adapter cable to the switch before connecting

the adapter to the AC outlet.

Table des matières

Autres manuels KTI Networks Changer

KTI Networks

KTI Networks KGS-0820 Manuel utilisateur

KTI Networks

KTI Networks KS-108F Manuel utilisateur

KTI Networks

KTI Networks KGS-510F-C Manuel utilisateur

KTI Networks

KTI Networks KGS-2423 Manuel utilisateur

KTI Networks

KTI Networks KGS-2422-TG Series Manuel utilisateur

KTI Networks

KTI Networks KGS-2416 Manuel utilisateur

KTI Networks

KTI Networks KS-124 Manuel utilisateur

KTI Networks

KTI Networks KCD-303P-A1 Manuel utilisateur

KTI Networks

KTI Networks KS-116 Manuel utilisateur

KTI Networks

KTI Networks KCD-303P-A Series Manuel utilisateur

KTI Networks

KTI Networks DH-8T Manuel utilisateur

KTI Networks

KTI Networks KS-2601 Manuel utilisateur

KTI Networks

KTI Networks KFS-2621 Manuel utilisateur

KTI Networks

KTI Networks KS-115F Series Manuel utilisateur

KTI Networks

KTI Networks KGS-0841-W Manuel utilisateur

KTI Networks

KTI Networks KGS-1060 Manuel utilisateur

KTI Networks

KTI Networks KSD-541 Manuel utilisateur

KTI Networks

KTI Networks KS-115F Series Manuel utilisateur

KTI Networks

KTI Networks KGS-2416 Manuel utilisateur

KTI Networks

KTI Networks KFS-0540 Manuel utilisateur

KTI Networks

KTI Networks KGS-0800-4HP Manuel utilisateur

KTI Networks

KTI Networks KGS-2404 Manuel utilisateur

KTI Networks

KTI Networks KGS-2401 Manuel utilisateur

KTI Networks

KTI Networks KS-108F Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur