KTI Networks KGS-0800-4HP Manuel utilisateur
1
RGS-3084M-E
8-Port GbE Switch with 4 PoE+ PSE Ports
User’s Manual
Doc.161003B
1. Product Overview
The switch is an 8-port 10/100/1000Mbps unmanaged Ethernet switch with 4 PoE+ PSE
ports. It is designed to enhance network performance in a compact form factor. The switch
can also be rack-mounted with help of rack mounting brackets provided with the switch.
The switch comes with 8 10/100/1000Mbps ports, offering solutions for accelerating
bandwidth needs for small Ethernet workgroups. The switch uses store and forward
packet-switching technology, which offers reliable data transfer and supports automatic
MDI/MDI-X detection & auto-crossover on all ports which eliminates the need for cross over
cables or dedicated uplink ports. Any port can simply connect a server or a switch, using
the standard straight-through twisted-pair cable. The switch also supports 4 PoE+ ports that
can be used to power up PoE enabled devices. This switch is ideal for network connectivity
for the SOHO/SME environment.
2. Product Features
●8 RJ-45 Ports to support 10BaseT, 100BaseTX and 1000BaseT connectivity
●Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab and IEEE802.3af/at standards
●Supports IEEE802.3 auto-negotiation protocol
●Supports IEEE802.3x flow control for full duplex
●Supports auto MDI/MDI-X crossover
●Supports wire speed packet filtering and forwarding rate
●Supports store-and-forward switching architecture
●Link/ACT LED for each port & PoE LED for PoE ports
3. System Requirements
The following system requirements are recommended:
●Network card for each PC or Server
●Network cables Cat.5 for 1000Mbps
4. Front View
The DIP Switch configuration for supporting 10Mbps transmission with PoE up to 180
meters. Please note, after turning ON the DIP switch you have to reboot the switch.
2
RGS-3084M-E
After installing the switch, you can check its status from the LED indicators on the front
panel shown below.
5. LED Description
Following is the LED description:
LED Status Operation
Steady Green The switch is powered on.
Power Off The switch is powered off.
Steady Amber Connected to 10/100M network
Steady Green Connected to 1000M network
Blinking Transmitting/receiving data
Port LED
Off No device is connected
Steady Green Delivering Power to PoE devices.
PoE Off PoE function not active.
On (Green) Total PoE power consumed is over 50W
PoE Alert Off Total PoE power consumed is less than 50W
6. Connecting Computers
The switch features auto-MDI/MDIX crossover detection function and provides
plug-and-play capability. Users can immediately use the features of the product simply by
plugging the network cables (RJ45) to the computers and the switches.
7. Hardware Installation
1. Connect one Ethernet port to your router’s LAN port with an Ethernet cable.
2. Connect your computer to one port of the switch with an Ethernet cable.
3. Plug DC end of the provided Power Adapter into the power jack of the switch and the
AC end to a standard electrical socket.
8. Uplink
All Ports can be used as an uplink port for connecting another Ethernet switch without using
crossover cable. You may extend the network distance more than 100m or the number of
connected computers by linking another switch or hub.
3
RGS-3084M-E
9. To prolong the operational life of your units
●Do not stack more than eight units if free standing
●Do not place objects on top of any unit or stack
●Do not obstruct any vents at the sides of the case
10. Package Contents
The following items should be present in the product package:
●The switch unit
●One Power adapter
●One Power cord
●Quick installation guide
●Four Rubber feet
Make sure the package contains above items. If any listed item is damaged or missing,
please contact your retailer immediately.
4
RGS-3084M-E
11. Technical Specifications
Hardware
Standard
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T, IEEE 802.3x Flow Control,
IEEE 802.3af PoE, IEEE 802.3at PoE+
Network Ports 8 10/100/1000Mbps Gigabit copper ports
Shielded RJ-45, auto-negotiation, auto-MDI/MDI-X support
Network Cables Cat. 5, 5e, 6 or higher up to 100m
Power over Ethernet PSE on Port 1 ~ Port 4, 30W max. per port output
PoE Power Budget 60W max. shared by 4 PSE ports
PoE Alert LED alert when delivered PoE power over 50W
MAC Address Table 4K entries
Buffer Memory 1.5M bits
Jumbo Frame Up to 9K bytes
Dimension 165 x 118 x 39mm (W x D x H)
Power External Power 55V/1.3A
Temperature Operating: 0° ~ 40°C, Storage: -40° ~ 70°C
Humidity 10% ~ 90% (non-condensing)
Approval CE/FCC compliance
Autres manuels KTI Networks Changer
KTI Networks
KTI Networks KS-SOHO-5 Manuel utilisateur
KTI Networks
KTI Networks KS-801 Manuel utilisateur
KTI Networks
KTI Networks KS-280 Manuel utilisateur
KTI Networks
KTI Networks KS-124 Manuel utilisateur
KTI Networks
KTI Networks KGS-2800 Manuel utilisateur
KTI Networks
KTI Networks KS-108F Manuel utilisateur
KTI Networks
KTI Networks KS-115F Series Manuel utilisateur
KTI Networks
KTI Networks KS-2402 Manuel utilisateur
KTI Networks
KTI Networks KSD-103-A Series Manuel utilisateur
KTI Networks
KTI Networks KGS-2461-S Manuel utilisateur
KTI Networks
KTI Networks KS-105F-B Series Manuel utilisateur
KTI Networks
KTI Networks KPOE-800-1P Manuel utilisateur
KTI Networks
KTI Networks KS-116 Manuel utilisateur
KTI Networks
KTI Networks KF-8D Manuel utilisateur
KTI Networks
KTI Networks KS-1080 Manuel utilisateur
KTI Networks
KTI Networks KGS-1060 Manuel utilisateur
KTI Networks
KTI Networks KSD-800 Manuel utilisateur
KTI Networks
KTI Networks KF-4M Manuel utilisateur
KTI Networks
KTI Networks KGS-510F-C Manuel utilisateur
KTI Networks
KTI Networks KGD-802 Manuel utilisateur
