Kramer VP-734 Manuel utilisateur

VP-734 Quick Start

P/N:

2900- 301068QS

Rev:

Scan for full manual

VP-734 Quick Start Guide

This guide helps you install and use your VP-734 for the first time.

Go to www.kramerav.com/downloads/VP-734 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

VP-734 Presentation Switcher/Scaler

1 Set of rack ears

4 Rubber feet

Remote control transmitter with batteries

1 Power cord

1 Quick start guide

2 C-GM/3RVF-1 cables

Step 2: Get to know your VP-734

# Feature Function

IR Sensor

Receives signals from the remote control transmitter.

IR LED

Lights red when the unit accepts IR remote commands.

INPUT Selector

Buttons

(illuminate green

when selected)

UNIV. 1

Press to select the analog video (VGA / component / composite / s-Video) source

(configured via the OSD menu), and the appropriate audio source (from 1 to 2).

HDMI™ 1

Press to select the HDMI source (from 1 to 4).

Press to select the DP source.

5 Program BLANK Button Press to toggle between a blank screen (blue or black) and the program display.

The BLANK button can be programmed to mute the audio signal at the same time.

Program FREEZE Button

Press to freeze/unfreeze the program output video image. The FREEZE button can be

programmed to mute the audio signal at the same time.

MENU Button

Press to display the OSD menu screen. Press again to return to normal operation.

ENTER Button

Press to move to the next level in the OSD screen or to accept a new parameter.

Button Decreases the range by one step in the OSD screen or moves to the previous level in

the OSD screen.

Decreases the volume level, when not in the OSD menu.

Button Moves up one step (in the same level) in the OSD screen or moves to the previous slide

when running a slideshow.

Button

Increases the range by one step in the OSD screen.

Increases the volume level, when not in the OSD menu.

Button

Moves down one step (in the same level) in the OSD screen or moves to the next slide

when running a slideshow.

RESET TO XGA/720p Button

Press and hold to reset to the default resolution (toggles between RESET TO XGA and

720p).

PANEL LOCK Button

Press to lock/unlock the front panel to prevent unintentional operation

USB Connector

Connects to a USB drive to download a Logo and save settings.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

# Feature Function

UNIV 1 IN 15-pin HD Connector

Connect to the universal source (as computer graphics, composite video,

s-Video or component video), from 1 to 2.

HDMI 1 IN Connector

Connect to the HDMI 1 source (from 1 to 4).

DP IN DisplayPort Connector

Connect to the DP source.

15 CONFIGURABLE AUDIO INPUTS on 3.5

Mini Jack Connectors

Connect to the unbalanced stereo analog audio sources from 1 to 7.

AUDIO LINE OUT 5-pin Terminal Block

Connect to the balanced stereo analog audio acceptor.

VIDEO

OUTPUTS

HDMI 1 Connector

Connect to an HDMI acceptor.

PC 15-pin HD Connector

Connect to a computer graphics acceptor.

ETHERNET Port

Connect to your LAN.

RS-232 9-pin D-sub Connector

Connect to PC or Serial Controller.

SPKR OUT 4-pin Terminal Block

Connect to a pair of loudspeakers.

S/PDIF IN 3.5 Mini Jack Connector

Connect to a digital audio source.

S/PDIF OUT 3.5 Mini Jack Connector

Connect to a digital audio acceptor.

Mains Power Connector

Connect to the mains power.

Mains Power Fuse

Fuse for protecting the device.

Step 3: Install the VP-734

To rack mount the machine attach both ear brackets (by removing the screws from each side

of the machine and replacing those screws through the ear brackets) or place the machine

on a table.

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your VP-734. For best results, we recommend that you

always use Kramer high-performance cables to connect AV equipment to the VP-734.

Connect the audio output

To a balanced

stereo audio

acceptor:

To an

unbalanced

stereo audio

acceptor:

Universal connector pinout

PIN # VGA COMP s-Video CV

Composite video

+5VD

EDID_SDA

H_Sync

V_Sync

EDID_SCL

Note that PINs 5, 6, 7, 8 and 10 are GND

Step 5: Connect the power

Connect the power cord to VP-734 and plug it into the mains electricity.

Safety Instructions

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Use only the power cord that is supplied with the unit.

Warning:

Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.

Warning:

Disconnect the power and unplug the unit from the wall before installing.

See www.KramerAV.com for updated safety information

Step 6: Operate the VP-734

Operate VP-734 via:

•Front panel buttons

•OSD menu

•Remotely, by RS-232 serial

commands transmitted by a

touch screen system, PC, or

other serial controller

•Remotely, using the IR remote

control transmitter

•Embedded web pages via the

Ethernet

RS-232 Control / Protocol 3000

Baud Rate:

115,200

Data Bits:

Stop Bits:

Parity:

None

Command Format:

ASCII

Example (switch input to UNIV2): Y 0 92 1<CR>

Default Ethernet Parameters

IP Address:

192.168.1.39

Subnet mask:

255.255.255.0

Gateway:

192.168.1.254

TCP Port #:

5000

Maximum TCP Ports:

Full Factory Reset

OSD

Go to: Menu-> Setup -> Factory Reset -> press Enter to

confirm

Front panel buttons Press the Reset to XGA/720p Button while plugging the

power to reset the machine

Technical Specifications

Inputs

2 Universal (VGA, Composite, s-Video

and Component)

On 15-pin HD connectors

4 HDMI

On female HDMI connectors

1 DP

On a female DisplayPort connector

1 S/PDIF

On an RCA connector

7 Unbalanced Stereo Audio

On 3.5mm mini jack connectors

Outputs

1 HDMI

On a female HDMI connector

1 PC

On a 15-pin HD connector

1 Balanced Stereo Audio

On a 5-pin terminal block connector (+4dBu nominal)

1 stereo speaker

On a 4-pin large terminal block (10W per channel into 8Ω)

1 digital S/PDIF output

on an RCA connector

Ports

Ethernet

On an RJ-45 female connector

RS-232

On a 9-pin D-sub connector

USB

On a USB connector

Video

Compliance

HDMI and HDCP

Output Resolutions Native HDMI, Native VGA, 640x480x60Hz, 640x480x75Hz,

800x600x50Hz, 800x600x60Hz, 800x600x75Hz,

1024x768x50Hz, 1024x768x60Hz, 1024x768x75Hz,

1280x768x50Hz, 1280x768x60Hz, 1280x720x60Hz,

1280x800x60Hz, 1280x1024x50Hz, 1280x1024x60Hz,

1280x1024x75Hz, 1366x768x50Hz, 1366x768x60Hz,

1400x1050x50Hz, 1400x1050x60Hz, 1600x900x60Hz (R),

1600x1200x50Hz, 1600x1200x60Hz, 1680x1050x60Hz,

1920x1080x60Hz, 1920x1200x60Hz (R), 2048x1080x50Hz,

2048x1080x60Hz, 3840x2160@24Hz, 3840x2160@25Hz,

3840x2160@29.97Hz, 3840x2160@30Hz,

4096x2160@24Hz, 480px60Hz, 576px50Hz, 720px50Hz,

720px60Hz, 1080ix50Hz (1080i/1080px50Hz), 1080ix60Hz

(1080i/1080px60Hz), 1080px50Hz, 1080px60Hz,

1080px24Hz, 480px59.94Hz, 720px59.94Hz,

1080ix59.94Hz (1080i/1080px59.94Hz), 1080px23.98,

1080px29.97, 1080px59.94, Custom 1 to Custom 4

Controls Front Panel

Input selection buttons, blank, freeze, lock and reset

resolution buttons

Menu buttons to access OSD menu

Remote

RS-232

Ethernet

Web pages

IR remote control transmitter

Power

Consumption

100-240V AC, 38VA max.

Environmental

Conditions

Operating Temperature

0° to +40°C (32° to 104°F)

Storage Temperature

-40° to +70°C (-40° to 158°F)

Humidity

10% to 90%, RHL non-condensing

Regulatory

Compliance

Safety

CE, FCC, UL

Environmental

RoHs, WEEE

Enclosure

Size

19”, 1U

Type

Aluminum

Cooling

Fan ventilation

General

Net Dimensions (W, D, H)

43.6cm x 23.7cm x 4.4cm (17.18" x 9.3" x 1.72")

Shipping Dimensions (W, D, H)

52.5cm x 33cm x 10.7cm (20.7" x 13" x 4.21")

Net Weight

2.5kg (5.5lbs) approx.

Shipping Weight

3.4kg (7.5lbs) approx.

Accessories

Included

Rack ears, IR remote control, power cord, 2 C-GM/3RVF-1

Specifications are subject to change without notice. Go to our Web site at www.kramerav.com to access the list of resolutions.

Autres manuels pour VP-734

Autres manuels Kramer Changer

Kramer

Kramer AFM-20DSP Manuel utilisateur

Kramer

Kramer VS-21H-IR Manuel utilisateur

Kramer

Kramer VS-24x1 Manuel utilisateur

Kramer

Kramer VM-4HDxl Manuel utilisateur

Kramer

Kramer VS-4x4FW Manuel utilisateur

Kramer

Kramer VP-727A-BA Manuel utilisateur

Kramer

Kramer ScaleMagix 2 VP-740HC Manuel utilisateur

Kramer

Kramer VP-440 Manuel utilisateur

Kramer

Kramer VP-61N Manuel utilisateur

Kramer

Kramer VS-21HDMI Manuel utilisateur

Kramer

Kramer MV-6 Manuel utilisateur

Kramer

Kramer VP-427UHD Manuel utilisateur

Kramer

Kramer VS-21H-IR Manuel utilisateur

Kramer

Kramer VS-33V Manuel utilisateur

Kramer

Kramer WP-20 Manuel utilisateur

Kramer

Kramer VP-443 Manuel utilisateur

Kramer

Kramer VS-121HC Manuel utilisateur

Kramer

Kramer VS-21H-IR Manuel utilisateur

Kramer

Kramer VS-41HDMI Manuel utilisateur

Kramer

Kramer VS-55 Manuel utilisateur

Kramer

Kramer VP-734 Manuel utilisateur

Kramer

Kramer VP-732 Manuel utilisateur

Kramer

Kramer VM-3H2 Manuel utilisateur

Kramer

Kramer VP-719x1 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur