Kramer VM-80VN Manuel utilisateur

VM-80VN Quick Start

P/N:

2900- 301263QS

Rev:

Scan for full manual

VM-80VN Quick Start Guide

This guide helps you install and use your VM-80VN for the first time.

Go to www.kramerav.com/downloads/VM-80VN to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

VM-80VN 1:8 Video Distributor

4 Rubber feet

1 Power supply (12V DC)

1 Quick start guide

Step 2: Get to know your VM-80VN

This section defines the VM-80VN.

Feature

Function

POWER LED

Illuminates when the device is powered on

CH2 ADJ HF Trimmer

Adjusts the CH2 cable compensation equalization level

CH2 ADJ Level Trimmer

Adjusts the CH2 video gain level

CH1 ADJ HF Trimmer

Adjusts the CH1 cable compensation equalization level

CH1 ADJ Level Trimmer

Adjusts the CH1 video gain level

CH 1 IN BNC Connector

Connects to the CH1 video source

CH 1 IN 75ΩPushbutton

Press in for CH1 75Ω termination, release for no termination

1:8 Pushbutton

Press in for 1:8 operation, release for 1:4 operation

CH 2 IN BNC Connector

Connects to the CH2 video source

CH 2 IN 75 ΩPushbutton

Press in for CH2 75Ω termination, release for no termination

CH 1 OUT BNC Connector

Connects to the CH1 video acceptor(s) (from 1 to 4)

CH 2 OUT BNC Connector

Connects to the CH2 video acceptor(s) (from 1 to 4)

12V DC Connector

Connector for attaching the 12V DC power supply

Step 3: Mount VM-80VN

Install VM-80VN using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Mount the unit in a rack using the recommended rack adapter (see www.kramerav.com/product/VM-80VN).

•Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VM-80VN.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VM-80VN.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the 12V DC power adapter to VM-80VN and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

Step 6: Operate VM-80VN

For 1:8 operation, press the 1:8 button

Using a small screwdriver, adjust the HF (EQ) or Level

(Gain) potentiometers per channel

For looping, press the 75Ω button

Autres manuels pour VM-80VN

Table des matières

Autres manuels Kramer Convertisseur de média

Kramer

Kramer VM-30CA Manuel utilisateur

Kramer

Kramer VA-1DVI Manuel utilisateur

Kramer

Kramer VA-11 Manuel utilisateur

Kramer

Kramer VP-413 Manuel utilisateur

Kramer

Kramer VM-1120 Manuel utilisateur

Kramer

Kramer PT-101H4 Manuel utilisateur

Kramer

Kramer VM-2DH Manuel utilisateur

Kramer

Kramer VM-28H Manuel utilisateur

Kramer

Kramer VP-701XL Manuel utilisateur

Kramer

Kramer KDS-SW3-EN7 Manuel utilisateur

Kramer

Kramer VP-510 Manuel utilisateur

Kramer

Kramer VM-28H Manuel utilisateur

Kramer

Kramer VP-439 Manuel utilisateur

Kramer

Kramer VM-80HP Manuel utilisateur

Kramer

Kramer VP-475UX Manuel utilisateur

Kramer

Kramer VP-434 Manuel utilisateur

Kramer

Kramer VM-8H Manuel utilisateur

Kramer

Kramer TP-580TD Manuel utilisateur

Kramer

Kramer KDS-17DEC Manuel utilisateur

Kramer

Kramer VM-24H Manuel utilisateur

Kramer

Kramer VM-28H Manuel utilisateur

Kramer

Kramer VP-410 Manuel utilisateur

Kramer

Kramer FC-4 Manuel utilisateur

Kramer

Kramer WP-SW2-EN7 Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur