Kramer VP-409 Manuel utilisateur

VP-409 Quick Start

P/N:

2900- 301262QS

Rev:

Scan for full manual

VP-409 Quick Start Guide

This guide helps you install and use your VP-409 for the first time.

Go to www.kramerav.com/downloads/VP-409 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

VP-409 Video to WUXGA Scaler

1 Set of rack ears

1 Power cord

1 Quick start guide

Step 2: Get to know your VP-409

Feature

Function

OUTPUT 15-pin HD Connector

Connects to the VGA-WUXGA acceptor

Y/C IN 4-pin Connector

Connects to an s-Video source

CV IN RCA Connector

Connects to a composite video source

5V DC

+5V DC connector for powering the unit

INPUT SELECT Button

Press to select between inputs

CV LED

Illuminates when the CV input is selected

Y/C LED

Illuminates when the Y/C input is selected

OUTPUT RES. Button

Press to select the desired output resolution

VGA LED

Illuminates when the VGA (640x480) resolution is selected

SVGA LED

Illuminates when the SVGA (800x600) resolution is selected

XGA LED

Illuminates when the XGA (1024x768) resolution is selected

1280x800 LED

Illuminates when the 1280x800 (Wide XGA) resolution is selected

1366x768 LED

Illuminates when the 1366x768 (WXGA) resolution is selected

WSXGA LED

Illuminates when the WSXGA (1440x900) resolution is selected

SXGA LED

Illuminates when the SXGA (1280x1024) resolution is selected

1400x1050 LED

Illuminates when the 1400x1050 (SXGA+) resolution is selected

1680x1050 LED

Illuminates when the 1680x1050 (WSXGA+) resolution is selected

UXGA LED

Illuminates when the UXGA (1600x1200) resolution is selected

1920x1080 LED

Illuminates when the 1920x1080 (1080p RGB) resolution is selected

WUXGA LED

Illuminates when the WUXGA (1920x1200) resolution is selected

Step 3: Mount VP-409

Install VP-409 using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket on each side of the unit and attach it to a flat surface

(see www.kramerav.com/downloads/VP-409).

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/VP-409).

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VP-409.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VP-409.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the power cord to VP-409 and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

•Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.

•To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which located on the

bottom of the unit.

Autres manuels pour VP-409

Autres manuels Kramer Convertisseur de média

Kramer

Kramer VP-429H2 Manuel utilisateur

Kramer

Kramer KDS-EN6 Manuel utilisateur

Kramer

Kramer MV-6 Manuel utilisateur

Kramer

Kramer 482 Manuel utilisateur

Kramer

Kramer TOOLS VP-100 Manuel utilisateur

Kramer

Kramer WP-SW2-EN7 Manuel utilisateur

Kramer

Kramer VP-410 Manuel utilisateur

Kramer

Kramer VP-424 Manuel utilisateur

Kramer

Kramer VP-451 Manuel utilisateur

Kramer

Kramer VM-1045 Manuel utilisateur

Kramer

Kramer VM-1110xl Manuel utilisateur

Kramer

Kramer KDS-SW3-EN7 Manuel utilisateur

Kramer

Kramer FC-4001 Manuel utilisateur

Kramer

Kramer KDS-17DEC Manuel utilisateur

Kramer

Kramer VP-425 Manuel utilisateur

Kramer

Kramer FC-5000 Manuel utilisateur

Kramer

Kramer FC-49 Manuel utilisateur

Kramer

Kramer DigiTOOLS VM-2HDMI Manuel utilisateur

Kramer

Kramer VM-312 Manuel utilisateur

Kramer

Kramer 6810HDxl Manuel utilisateur

Kramer

Kramer WP-SW2-EN7 Manuel utilisateur

Kramer

Kramer FC-1DGH Manuel utilisateur

Kramer

Kramer VM-50AN Manuel utilisateur

Kramer

Kramer VM-127 Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur