Kramer FC-174 Manuel utilisateur

FC-174 Quick Start (P/N: 2900-300939QS REV 1)

P/N:

2 9 0 0 - 3 0 0 9 3 9 QS

Rev:

Scan for full manual

FC-174 Quick Start Guide

This guide helps you install and use your FC-174 for the first time.

Go to www.kramerav.com/downloads/FC-174 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

FC-174 4 Channel 4K HDMI Converter Tool

4 Rubber feet

TOOL Mounting bracket kit

1 Power adapter and cord

1 Quick start guide

Step 2: Get to know your FC-174

Feature

Function

ON LED

Lights green when the unit is powered on.

MENU Button

Press to enter/exit the on-screen display (OSD) menu.

ENTER Button

In the OSD, press to choose the highlighted menu item.

When not in the OSD, press to view information (enabled when a channel input and

output is connected and the channel Display Information is set to On).

Press ENTER and + simultaneously to reset the device to its default parameters.

-Button

In the OSD, press to move back through the list or to decrement the parameter value.

+ Button

In the OSD, press to move forward through the list or to increment the parameter value.

Press ENTER and + simultaneously to reset the device to its default parameters.

HDMI IN Connectors (1 to 4)

Connect to HDMI sources.

HDMI OUT Connectors (1 to 4)

Connect to HDMI acceptors.

Note that IN 1 to OUT 1 comprises Channel 1, IN 2 to OUT 2 comprises Channel 2 and so on.

RS-232 9-pin D-sub Connector

Connect to a PC to control FC-174 via the Windows Application software.

PROG USB Port

Connect to a PC for firmware upgrade.

5V DC

+5V DC connector for powering the unit.

Step 3: Install the FC-174

Install FC-174 using one of the following methods:

Attach the rubber feet and place the unit on a flat surface.

Fasten a bracket (included) on each side of the unit and attach it to a flat surface.

For more information go to www.kramerav.com/downloads/FC-174.

Mount the unit in a rack using an optional RK-T2B rack adapter.

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your FC-174. For best results, we recommend that you always

use Kramer high-performance cables to connect AV equipment to the FC-174.

Step 5: Connect the power

Connect the 5V DC power adapter to the power socket and then connect the adapter to the mains electricity.

Safety Instructions

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Use only the Kramer Electronics power supply that is provided with the unit.

Warning:

Disconnect the power and unplug the unit from the wall before installing.

See www.KramerAV.com for updated safety information.

Step 6: Operate the FC-174

Use the OSD menu to set the parameters:

Menu Item

Function

Channel 1 to Channel 4

Input EDID Select: Sink User or Internal

4K2K 50/60 RGB: 4:2:0 Downsampling, 4:2:2 Downsampling or Passthrough.

4K2K 50/60 YUV4:4:4: 4:2:0 Downsampling, 4:2:2 Downsampling or Passthrough.

4K2K 50/60 YUV4:2:2: 4:2:0 Downsampling, 4:2:2 Downsampling or Passthrough.

Auto Sync Off: Disable, Slow or Fast.

Output Pattern: Mode (On/Off), Timing and Pattern Type.

OSD: Display Information (Yes/No) and Display Timeout.

Main OSD

Display Select: All Channels or one Channel (set Main OSD to appear on all channels or on one of

the four channels).

Display Timeout: 5 to 40 sec, Off

Channel Information

Channel 1 to 4: Resolution, Input Colorspace, Output Colorspace, Input HDCP, Output HDCP

Firmware Version

System Setting

Firmware Update.

Factory Reset.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kramer Convertisseur de média

Kramer

Kramer VM-1110xl Manuel utilisateur

Kramer

Kramer FC-7501 Manuel utilisateur

Kramer

Kramer VP-423 Manuel utilisateur

Kramer

Kramer FC-340S Manuel utilisateur

Kramer

Kramer VA-1VGA Manuel utilisateur

Kramer

Kramer VM-4DH Manuel utilisateur

Kramer

Kramer FC-17 Manuel utilisateur

Kramer

Kramer FC-41 Manuel utilisateur

Kramer

Kramer TOOLS FC-47 Manuel utilisateur

Kramer

Kramer VM-1010 Manuel utilisateur

Kramer

Kramer PT-871/2xr-KIT Manuel utilisateur

Kramer

Kramer FC-16 Manuel utilisateur

Kramer

Kramer VP-434 Manuel utilisateur

Kramer

Kramer VP-409 Manuel utilisateur

Kramer

Kramer VM-4UX Manuel utilisateur

Kramer

Kramer MV-6 Manuel utilisateur

Kramer

Kramer DigiTOOLS 7508 Manuel utilisateur

Kramer

Kramer KDS-EN6 Manuel utilisateur

Kramer

Kramer PT-101H4 Manuel utilisateur

Kramer

Kramer VM-24H Manuel utilisateur

Kramer

Kramer VP-437xl Manuel utilisateur

Kramer

Kramer VP-434 Manuel utilisateur

Kramer

Kramer VP-715 Manuel utilisateur

Kramer

Kramer VP-426C Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur