Kramer BC/VS-2216 Manuel utilisateur

BC/VS-2216

INSTRUCTION MANUAL

BC/VS-2216: 16x16 Programmable Stereo Audio Matrix Switcher

The BC-2216 Programmable Stereo Audio Matrix Switcher is the top of the line of Kramer’s audio

switchers. The BC-2216 serves as a 16x16 Stereo Audio switcher, for any studio application. The

machine may be operated as a stand-alone matrix or work in conjunction with the KRAMER BC-

2516 Video Switcher.

The BC-2216 unit has an LCD readout and a key-pad controlled operation. The unit has a bright

LED readout showing the switchers status and a microprocessor built-in with an EEPROM for

storing and retrieving settings.

Operation:

Connect all sources and acceptors to the rear panel of the BC-2216 machine, as

explained in the following diagrams.

Interconnect, if necessary, the BC-2216 unit to either the BC-2516 or the BC-2616

machines using a flat cable with DB9 male-to-male connectors on each side.

Connect a cable between the DB9 socket of the BC-2216 unit to the serial port of the

PC for RS-232 control

Install the accompanying software on your hard disk, following the instructions in

the distribution diskette.

Operate the sources, acceptors as well as the BC-2216 unit.

The keypad operation is interactive. In order to perform a function, the required

function switch (CON, SYS, STO, or RCL) should be pressed. The LCD back-light

will turn on, and a dialogue between the user and machine is initiated.

CONnect - to connect an input to a selected output.

SYStem - This function selects whether the user wishes to work in audio breakaway

or not, i.e., should the audio switching be done separately from the video switching,

or should it follow the video switching. This function is also used for setting the

baud rate for the RS-232 communication port. When using this SYStem function,

please note that if you do not want to change a parameter, simply pressing ENT (i.e.

ENTER) will leave the previously set parameter in effect.

STOre - to save the present setup of the machine in memory. Up to 15 setups may

be saved.

RCL - the recall key is used to recall a setup saved in memory. The recalled setup

will blink on the LED displays, and user confirmation is required if the setup is to be

implemented.

PROGRAM display:

When using the keypad to control the machine, the LCD display becomes a user-friendly interface

between the user and the machine - prompting for user input, warning before data may be erased,

informing of setup parameters, etc.

STATUS display:

This 7-segment LED display shows the audio connections of the machine. The first digit is the input

which is connected to output 1, the second is the input which is connected to output 2, etc. When

recalling a saved setup, that setup will flash on the STATUS display. A flashing display does not

indicate the present status of the machine, it displays the status which will be set up if the user

confirms implementation.

The RS232 Interface:

The BC-2216 may be also controlled with the serial RS-232 interface. The switcher is supplied with

a program which, using this port, allows control and monitoring of the unit/s via a PC.

Technical Specifications:

INPUTS: 16 Stereo Audio, looping, 50K input impedance on terminal blocks.

OUTPUTS: 16 Stereo Audio, 50 Ohms on terminal blocks.

AUDIO BANDWIDTH: Exceeding 40 KHz.

CROSSTALK: Less than 70dB (1KHz).

THD: Less than 0.1%

COUPLING: AC.

MAXIMAL SIGNAL LEVEL: 12Vpp.

AUDIO S/N: Better than 85 dB (+4dBm).

CONTROL: Microprocessor and EEPROM.

INTERFACE: RS-232.

STORAGE CAPACITY: 15 presets.

DIMENSIONS: 19 inch, 2U, rack mountable.

POWER SOURCE: 230 VAC (115VAC, U.S.A.).

WEIGHT: 3.7 Kg.

Please note that if the output signal is disturbed or interrupted by very strong external electromagnetic interference, it

should return and stabilize when such interference ends. If not, turn the power switch off and on again to reset the

machine. The socket-outlet shall be installed near the equipment and shall be easily accessible. To fully disconnect

equipment, remove power cord from its socket.

Table des matières

Autres manuels Kramer Commutateur matriciel

Kramer

Kramer Sierra Pro XL 1616V5 Manuel utilisateur

Kramer

Kramer XL 1608V4S Manuel utilisateur

Kramer

Kramer VS-88HD Manuel utilisateur

Kramer

Kramer AFM-20DSP-LE Manuel utilisateur

Kramer

Kramer XL 1204VS Manuel utilisateur

Kramer

Kramer VS-44UHD Manuel utilisateur

Kramer

Kramer VS-44HDCP Manuel utilisateur

Kramer

Kramer 84V5 Manuel utilisateur

Kramer

Kramer VS-3232V Manuel utilisateur

Kramer

Kramer Sierra Video 1204V3 Manuel utilisateur

Kramer

Kramer VS-42HN Manuel utilisateur

Kramer

Kramer Sierra Video 3264V5Sxl Manuel utilisateur

Kramer

Kramer Sierra Video 4848V5SXL Manuel utilisateur

Kramer

Kramer VS-48HDCPxl Manuel utilisateur

Kramer

Kramer VP-4x4xl Manuel utilisateur

Kramer

Kramer VP-8x8AK Manuel utilisateur

Kramer

Kramer Sierra Video 1208V5 Manuel utilisateur

Kramer

Kramer VS-88HN Manuel utilisateur

Kramer

Kramer VS-61YC Manuel utilisateur

Kramer

Kramer VP-1608 Manuel utilisateur

Kramer

Kramer XL 1204V4S Manuel utilisateur

Kramer

Kramer Sierra Pro XL 1208V3S Manuel utilisateur

Kramer

Kramer Sierra Video 3216V3 Manuel utilisateur

Kramer

Kramer VS-42HC Manuel utilisateur

Manuels Commutateur matriciel populaires d'autres marques

Broadcast Tools

Broadcast Tools SS 8.2 Manuel utilisateur

Altimium

Altimium MATF32 Manuel utilisateur

ALFAtron

ALFAtron ALF-MUK44N Manuel utilisateur

Monoprice

Monoprice Blackbird 15377 Manuel utilisateur

PTN

PTN FMX12 Manuel utilisateur

CYP

CYP nT15GX01 Manuel utilisateur

TESmart

TESmart HMA0402A40 Manuel utilisateur

Octava

Octava HD4XSTPMX Manuel utilisateur

Intelix

Intelix FLX-88 Mode d'emploi

Roland

Roland XS-1HD Manuel utilisateur

Atlona

Atlona AT-HDMI-22M Manuel utilisateur

Link

Link HD8X8 Manuel utilisateur

AMX

AMX AVS-OP-2020-117 Instructions et recettes

Lindy

Lindy 38042 Manuel utilisateur

Extron electronics

Extron electronics MTPX Plus Series Manuel utilisateur

Key Digital

Key Digital Champion KD-16x16CS Manuel utilisateur

Shinybow USA

Shinybow USA SB-8811 Manuel utilisateur

Optimus

Optimus Compact Manuel utilisateur