Kramer VS-3232DN-EM Manuel utilisateur

P/N: 2900-300932 Rev 3 www.KramerAV.com

USER MANUAL

MODEL:

VS-3232DN-EM

4x4 to 32x32 Modular Multi-Format

Managed Digital Matrix Switcher

Kramer Electronics Ltd. 
 
VS-3232DN-EM –Contents 
i 
 
Contents 
Introduction 1 
Getting Started 2 
Overview 4 
Mounting VS-3232DN-EM 11 
Connecting the VS-3232DN-EM 12 
Port Numbering 14 
Connecting to the VS-3232DN-EM via RS-232 15 
Connecting to the VS-3232DN-EM via USB (VCOM) 15 
Connecting to the VS-3232DN-EM via Ethernet 16 
Operating Your Video Matrix Switcher 19 
Startup Display 19 
Using the Selector Buttons 20 
Confirming Actions 20 
Switching Actions 21 
Locking the Front Panel Buttons 23 
Using the Configuration Menus 24 
Using the Setup Menu 24 
Using the Config Menu 28 
Configuring the Number of Installed Input and Output Ports 35 
Using the Test Video Card 36 
Defining the Test Video Card 36 
Setting the Resolution of the Generated Video 36 
Setting the Pattern of the Generated Video 37 
Installing the Test Module 37 
Using the Input / Output Cards 39 
Defining the UHD-IN4-F32 / UHD-OUT4-F32 39 
Defining the UHDA-IN4-F32 / UHDA-OUT4-F32 40 
Defining the DT-IN4-F32 / DT-OUT4-F32 43 
Defining the DTAxr-IN4-F32 / DTAxr-OUT4-F32 44 
Defining the HDBT-IN4-F32 / HDBT-OUT4-F32 47 
Defining the H-IN4-F32 / H-OUT4-F32 50 
Defining the HAD-IN4-F32 / HAD-OUT4-F32 51 
Defining the HAA-IN4-F32 / HAA-OUT4-F32 53 
Defining the HDCP-IN4-F32 / HDCP-OUT4-F32 55 
Defining the DGKat-IN4-F32 / DGKat-OUT4-F32 56 
Defining the F670-IN4-F32 / F670-OUT4-F32 58 
Defining the F610-IN4-F32 / F610-OUT4-F32 59 
Defining the DVI-IN4-F32 / DVI-OUT4-F32 60 
Defining the DL-IN2-F32 / DL-OUT2-F32 61 
Defining the SDIA-IN4-F32 62 
Defining the VGAA-IN4-F32 / VGAA-OUT4-F32 64 
Defining the AAD-IN4-F32 / AAD-OUT4-F32 67 
Using the Test Module to Troubleshoot Video Problems 69 
Testing the Projector Output 69 
Testing the Output Signal Path to the Projector 70 
Testing the Input and Output Signal Path to the Projector 70 
Input / Output Card Hardware Installation Instructions 71 
Installing a PS-1DN Power Supply 73 
Upgrading the VS-3232DN-EM Firmware 74 
Upgrading Firmware Using K-Upload 74 
Upgrading Firmware Using Kramer Network 75 
Technical Specifications 76 
VS-3232DN-EM Chassis 76 
Quick VS-3232DN-EM Card Comparison 76 
Default Settings 79 
Default Communication Parameters 79 
Factory Default EDID 79 

Kramer Electronics Ltd.

VS-3232DN-EM –Contents

Protocol 3000 96

Understanding Protocol 3000 Commands 97

Protocol 3000 Syntax 97

Protocol 3000 Commands 98

Using the Packet Protocol 122

Kramer Electronics Ltd.

VS-3232DN-EM –Introduction

Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world

of unique, creative, and affordable solutions to the vast range of problems that confront the

video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we

have redesigned and upgraded most of our line, making the best even better!

Congratulations on purchasing your Kramer VS-3232DN-EM 4x4 to 32x32 Modular

Multi-Format Managed Digital Matrix Switcher. This product, which incorporates HDMI™

technology, is ideal for:

•Professional display systems requiring video signal routing

•Broadcast, presentation and production facilities, as well as monitoring in large

duplication systems

•Rental/staging applications

Throughout this user manual the chassis configuration is shown with 32 DVI inputs and 32

DVI outputs as a representation only.

The following cards are available and may be mixed in the same chassis:

•UHD-IN4-F32 / UHD-OUT4-F32

(see Defining the UHD-IN4-F32 / UHD-OUT4-F32 on page 39).

•UHDA-IN4-F32 / UHDA-OUT4-F32

(see Defining the UHDA-IN4-F32 / UHDA-OUT4-F32 on page 39).

•DT-IN4-F32 / DT-OUT4-F32

(see Defining the DT-IN4-F32 / DT-OUT4-F32 on page 47).

•DTAxr-IN4-F32 / DTAxr-OUT4-F32

(see Defining the DTAxr-IN4-F32 / DTAxr-OUT4-F32 on page 43).

•HDBT-IN4-F32 / HDBT-OUT4-F32

(see Defining the HDBT-IN4-F32 / HDBT-OUT4-F32 on page 40).

•H-IN4-F32 / H-OUT4-F32

(see Defining the H-IN4-F32 / H-OUT4-F32on page 44).

•HAD-IN4-F32 / HAD-OUT4-F32

(see Defining the HAD-IN4-F32 / HAD-OUT4-F32 on page 47).

•HAA-IN4-F32 / HAA-OUT4-F32

(see Defining the HAA-IN4-F32 / HAA-OUT4-F32 on page 51).

•HDCP-IN4-F32 / HDCP-OUT4-F32

(see Defining the HDCP-IN4-F32 / HDCP-OUT4-F32 on page 53).

•DGKat-IN4-F32 / DGKat-OUT4-F32

(see Defining the DGKat-IN4-F32 / DGKat-OUT4-F32 on page 55).

•F670-IN4-F32 / F670-OUT4-F32

(see Defining the F670-IN4-F32 / F670-OUT4-F32 on page 56).

Kramer Electronics Ltd.

VS-3232DN-EM –Introduction

•F610-IN4-F32 / F610-OUT4-F32

(see Defining the F610-IN4-F32 / F610-OUT4-F32 on page 58).

•DVI-IN4-F32 / DVI-OUT4-F32

(see Defining the DVI-IN4-F32 / DVI-OUT4-F32 on page 59).

•DL-IN2-F32 / DL-OUT2-F32

(see Defining the DL-IN2-F32 / DL-OUT2-F32 on page 60).

•SDIA-IN4-F32

(see Defining the SDIA-IN4-F32 on page 61).

•VGAA-IN4-F32 / VGAA-OUT4-F32

(see Defining the VGAA-IN4-F32 / VGAA-OUT4-F32 on page 62).

•AAD-IN4-F32 / AAD-OUT4-F32

(see Defining the AAD-IN4-F32 / AAD-OUT4-F32 on page 64).

The F670-IN4/OUT4-F32 cards are fully compatible with the Kramer 670T/670R and

671T/671R HDMI/DVI transmitters and receivers for non-HDCP content.

Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging materials for

possible future shipment.

•Review the contents of this user manual.

Go to www.kramerav.com/downloads/VS-3232DN-EM to check for up-to-date user manuals,

application programs, and to check if firmware upgrades are available (where appropriate).

Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables (we recommend Kramer high-performance,

high-resolution cables) to avoid interference, deterioration in signal quality due to poor

matching, and elevated noise levels (often associated with low quality cables).

•Do not secure the cables in tight bundles or roll the slack into tight coils.

•Avoid interference from neighboring electrical appliances that may adversely influence

signal quality.

•Position your VS-3232DN-EM away from moisture, excessive sunlight and dust.

Kramer Electronics Ltd.

VS-3232DN-EM –Introduction

Safety Instructions

Warning: Class 1 laser product

•Invisible laser radiation present.

•Avoid long-term viewing of laser.

•Avoid the use of magnifying viewing aids or instruments (such as binoculars,

telescopes, microscopes and magnifying lenses, but not spectacles or contact lenses).

•Avoid placing optical devices in the emitted beam that could cause the concentration of

the laser radiation to be increased.

Caution:

•This equipment is to be used only inside a building. It may only be connected to other

equipment that is installed inside a building.

•For products with relay terminals and GPI\O ports, please refer to the permitted rating

for an external connection, located next to the terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

•Do not open the unit. High voltages can cause electrical shock! Servicing by qualified

personnel only.

•To ensure continuous risk protection, replace fuses only according to the rating

specified on the product label which located on the bottom of the unit.

Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce

the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected

and recycled. To comply with the WEEE Directive, Kramer Electronics has made

arrangements with the European Advanced Recycling Network (EARN) and will cover any

costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on

arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular

country go to our recycling pages at www.kramerav.com/support/recycling.

About Fast Switching

Older display devices require a longer time between the loss of one digital signal and the

introduction of another, as well as a physical disconnection of the interconnecting cable in

order to be able to detect and adjust to the new video attributes and parameters. Normal

switching, therefore, introduced a 5V signal disconnection along with a delay in switching.

Many newer display devices, however, are now capable of accepting “on-the-fly” switching.

Depending on the display device in use, the VS-3232DN-EM allows for fast switching (minor

reset and the connection kept alive) and extra fast switching (no reset and the connection

kept alive), see Using the Input / Output Cards on page 31. Using the fast and extra fast

switching modes allows for fraction-of-a-second switching times when using high performance

display devices or when using a scaler on the video output.

Kramer Electronics Ltd.

VS-3232DN-EM –Introduction

About HDBaseT™ Technology

HDBaseT™ is an advanced all-in-one connectivity technology (supported by the HDBaseT

Alliance). It is particularly suitable in the consumer home environment as a digital home

networking alternative where it enables you to replace numerous cables and connectors by a

single LAN cable used to transmit, for example, uncompressed full high definition video,

audio, IR, as well as various control signals.

The products described in this user manual are HDBaseT certified.

About EDID

The Extended DisplayIdentification Data (EDID) is a data-structure provided by a display, to

describe its capabilities to a graphics card (that is connected to the display’s source). The EDID

enables the VS-3232DN-EM to “know” what kind of monitor is connected to the output. The EDID

includes the manufacturer’s name, the product type, the timing data supported by the display, the

displaysize, luminance data and (for digital displays only) the pixel mapping data. EDID is defined

by a standard published by the Video Electronics Standards Association (VESA).

About Power Connect™

The Power Connect™ feature here means that the VS-3232DN-EM can supply power to the

TP transmitters and receivers (for example, the TP-573 and TP-574) as long as the devices

are within 90m (270ft) of each other. The Power Connect™ feature applies as long as the

cable can carry power and the distance does not exceed 90m on standard CAT 5 cable. For

longer distances, a heavier gauge cable should be used (a TP cable is still suitable for the

video/audio transmission, but not for feeding the power at these distances).

Overview

The Kramer VS-3232DN-EM is a high-performance matrix switcher chassis for AV signals.

The unit is modular and populated from 4 x 4 to 32 x 32 ports in increments of four inputs

and/or four outputs. The unit supports various signals, depending on the type of cards

installed and includes a power supply, control module and a test module that can monitor and

test any video input and output in the matrix. It features a very high bandwidth of up to

3.4Gbps (for the chassis only, effective bandwidth of the system depends on the input / output

cards, see Using the Input / Output Cards on page 39) that ensures transparent performance

even in the most critical applications. The cards re-clock and equalize the signals and the

chassis can route any or all inputs to any or all outputs simultaneously.

The VS-3232DN-EM is highly configurable–you can add or remove inputs and outputs

independently in groups of four and mix different types of input/output cards in the same

chassis. For example, you can configure a device as a 4 x 24 or a 32 x 8 matrix switcher to

exactly suit your needs.

Kramer Electronics Ltd.

VS-3232DN-EM –Introduction

The VS-3232DN-EM features:

•Full 32 x 32 non-blocking matrix array to switch any of the 32 input digital signals to any

or all outputs (see Connecting the VS-3232DN-EM on page 11).

•Easy access to 59 pre-set memory locations for quick access to user-defined setups.

•Fast switching on outputs to reduce or remove switching delay.

•Redundant, hot swappable power supply (optional).

•Simple firmware upgrade of compatible devices (see Upgrading the VS-3232DN-EM

Firmware on page 74).

•Seamless integration with Kramer Network for switching, card status, port status,

firmware upgrades (of compatible cards), and more.

•A 40 character by 2 line LCD that shows the operational status or the configuration

menu.

•A lock function to prevent tampering with the front panel.

•A default EDID (Extended Display Identification Data) for each input.

•Non-volatile EDID storage.

•Kramer Core™ – Flexible infrastructure conversion. Copper, fiber or Twisted Pair, all can

be used at the same time according to input/output module selection. The matrix

receives signals from compatible Kramer transmitters, automatically converts between

available infrastructure options and sends the signals to compatible Kramer receivers.

•Max. Data Rate –10.2Gbps (3.4Gbps per graphic channel) when using compatible

cards.

•HDTV Compatible.

•HDCP Compliant –With DVI (HDCP), HDMI, F670, HDBaseT, HDMI with audio and

DGKat modules.

•HDMI Support.

•DGKat™ Signal Integration – Kramer’s unique technology for converting TMDS as well

as control and communication to signals that run over twisted pair cables. For optimum

range and performance using, use recommended Kramer cables, available at:

www.kramerav.com/product/VS-3232DN-EM

•Kramer Equalization & re-Klocking™ Technology – Rebuilds the digital signal to travel

longer distances.

•Optional Fast Switching Support –For fraction of a second switching.

•Modular & Easily Configurable Platform –Input or output module types can be mixed

and added in increments of 4 from 4x4 up to 32x32.

•Versatile Selection of Modules –Including DVI, HDMI, HDCP (HDMI over DVI

connector), Dual Link DVI, HDMI over Fiber, DVI over Fiber, HDBaseT, HDMI with

analog audio interface, HDMI with digital audio interface, VGA and DGKat (HDMI over

twisted pair).

•Kramer Protocol 3000 Support.

•Flexible Configuration –To disable HDCP support and convert between HDMI and DVI.

Kramer Electronics Ltd.

VS-3232DN-EM –Introduction

You can operate the VS-3232DN-EM via the front panel buttons or remotely via:

•RS-232 or USB (VCOM) serial commands transmitted by a touch screen system, PC or

other serial controller.

•Ethernet over a LAN.

•The infrared remote control transmitter (future).

•Kramer Network enterprise management platform.

The VS-3232DN-EM is a sophisticated device but has nevertheless been designed to be

simple to operate using an intuitive front panel keypad. For details of how to route inputs to

outputs, see Switching Actions on page 21.

The VS-3232DN-EM is housed in a 19" rack-mountable enclosure.

Kramer Electronics Ltd.

VS-3232DN-EM –Introduction

Defining the VS-3232DN-EM 4x4 to 32x32 Modular

Multi-Format Managed Digital Matrix Switcher

This section defines the front and rear panels of the VS-3232DN-EM.

Figure 1: VS-3232DN-EM Front Panel

Buttons 14, 15 and 16 function as the TAKE, MENU and LOCK buttons respectively.

Feature

Function

Double-function

Selector Buttons

Area

Menu Button

Functions

ESC

Press to exit the current operation.

EDID

Press to assign EDID channels.

STO

Press to store the current setup in a preset. After pressing

the MENU button, this button lights and is enabled.

ALL

Press to connect an input to all outputs. After pressing the

MENU button, this button lights and is enabled.

OFF

Press to turn off an output. After pressing the MENU

button, this button lights and is enabled.

RCL

Press to recall a preset. After pressing the MENU button,

this button lights and is enabled.

DELAY

Press to set the delay between confirming an action and

the execution of the action.

ENT

Press to complete the input-output setup when using a

one-digit number instead of two digits. For example, to

enter input 5, you can press either 05 or 5, ENT.

Press to enter the options in a setup menu.

Autres manuels pour VS-3232DN-EM

Table des matières

Autres manuels Kramer Commutateur matriciel

Kramer

Kramer Sierra Pro XL 1616V3 Manuel utilisateur

Kramer

Kramer VP-88 Manuel utilisateur

Kramer

Kramer VS-1616D Manuel utilisateur

Kramer

Kramer VS-88UHD Manuel utilisateur

Kramer

Kramer VP-4x4K Manuel utilisateur

Kramer

Kramer VS-1616AD Manuel utilisateur

Kramer

Kramer VP-27 Manuel utilisateur

Kramer

Kramer VS-88HDCPxl Manuel utilisateur

Kramer

Kramer Sierra Video 4848V5SXL Manuel utilisateur

Kramer

Kramer VS-48HDCPxl Manuel utilisateur

Kramer

Kramer VP-725DS Manuel utilisateur

Kramer

Kramer Sierra Pro XL 1616V3S Manuel utilisateur

Kramer

Kramer VP-2x2 Manuel utilisateur

Kramer

Kramer VS-1616D-MD Manuel utilisateur

Kramer

Kramer XL 1208VS Manuel utilisateur

Kramer

Kramer Sierra Video 3232V5S Manuel utilisateur

Kramer

Kramer VS-626 Manuel utilisateur

Kramer

Kramer Sierra Video 4864V5xl Manuel utilisateur

Kramer

Kramer VS-5x5 Manuel utilisateur

Kramer

Kramer XL 1608V Manuel utilisateur

Kramer

Kramer Sierra Video 1204V3S Manuel utilisateur

Kramer

Kramer Cobra MX-1616 Manuel utilisateur

Kramer

Kramer VS-42UHD Manuel utilisateur

Kramer

Kramer VP-4x8 Manuel utilisateur

Manuels Commutateur matriciel populaires d'autres marques

Broadcast Tools

Broadcast Tools SS 8.2 Manuel utilisateur

Altimium

Altimium MATF32 Manuel utilisateur

ALFAtron

ALFAtron ALF-MUK44N Manuel utilisateur

Monoprice

Monoprice Blackbird 15377 Manuel utilisateur

PTN

PTN FMX12 Manuel utilisateur

CYP

CYP nT15GX01 Manuel utilisateur

TESmart

TESmart HMA0402A40 Manuel utilisateur

Octava

Octava HD4XSTPMX Manuel utilisateur

Intelix

Intelix FLX-88 Mode d'emploi

Roland

Roland XS-1HD Manuel utilisateur

Atlona

Atlona AT-HDMI-22M Manuel utilisateur

Link

Link HD8X8 Manuel utilisateur

AMX

AMX AVS-OP-2020-117 Instructions et recettes

Lindy

Lindy 38042 Manuel utilisateur

Extron electronics

Extron electronics MTPX Plus Series Manuel utilisateur

Key Digital

Key Digital Champion KD-16x16CS Manuel utilisateur

Shinybow USA

Shinybow USA SB-8811 Manuel utilisateur

Optimus

Optimus Compact Manuel utilisateur