Kontron EPCI-201 Manuel utilisateur

P/N : M8004_INST Page 1 of 1 V 1.0 November 2004

READ ME FIRST

UNPACKING AND SAFETY PRECAUTIONS

Static Electricity

Since static electricity can cause damage to electronic devices, the following precautions should be

taken:

1. Keep the board in its anti-static package, until you are ready to install it.

2. Always touch a grounded surface or wear a grounding wrist strap before removing the board

from its package; this will discharge any static electricity that may have built up in your body.

3. Handle the board by the edges.

Storage Environment

Electronic boards are sensitive devices. Do not handle or store devices near strong electrostatic,

electromagnetic, magnetic or radioactive fields.

Power Supply

Before any installation or setup, ensure that the board is unplugged from power sources or

subsystems.

Unpacking

Follow these recommendations while unpacking:

1. After opening the box, save it as well as the packing material for possible future shipment.

2. Remove the board from its anti-static wrapping and place it on a grounded surface.

3. Inspect the board for damage. If there is any damage or missing items, notify Kontron

immediately.

When unpacking you will find:

1. One ePCI-201 SBC.

2. One CD-ROM containing drivers *

3. One heat sink.

4. One Quick Reference sheet.

5. Cables listed on the order.

6. One mezzanine with two USB connectors, one RCA connector and one video (DB15) connector.

Note:

For latest Technical Reference Manual, Quick Reference Sheet, drivers, BIOS and other

documentation, please consult our web site at: http://www.kontron.com or our FTP site at:

ftp://ftp.kontron.ca/Support

* Note that the Ethernet driver for the 82541ER available on the CD 4.1 is not working

properly. To download the new version, please visit www.kontron.com or

ftp.kontron.ca/support/

P/N : M8004_INST Page 2 of 2 V 1.0 November 2004

CPU and Heatsink Installation

Raise the Socket Actuation Lever up to 90º.

Locate the Pin 1 Notch.

Locate the Pin 1 Notch on the CPU.

Install the CPU onto Socket (match the pin 1 of CPU

with Pin 1 of Socket.

Lower the Socket Actuation Lever.

Remove the protective cover under the heatsink.

Install the CPU Heatsink onto the CPU and clip it to

the retention module.

Activate simultaneously the clips levers in order to

secure the heat sink.

Caution : You must apply pressure equally on both

side of the heatsink when you fasten the side

brackets.

Connect the CPU Fan cable to the CPU fan

connector (J21) located near the Memory Sockets.

IMPORTANT

1. Once the CPU is installed you must handle the board carefully and hold it on the

heatsink side.

2. The CPU Power cable must be installed on connector J22.

If not installed, the board will not start. This 4 wires cable comes from P4 ready power

supply or from the Backplane.

mPGA478B

Pin 1

Notch

Pin 1 Notch

mPGA478B

Table des matières

Autres manuels Kontron Matériel informatique

Kontron

Kontron COM Express Extension Manuel utilisateur

Kontron

Kontron cPCI-DMXS64GX Manuel du produit

Kontron

Kontron MSM-LP Manuel utilisateur

Kontron

Kontron COM-HPC Manuel utilisateur

Kontron

Kontron AdvancedTCA AT8001 Manuel utilisateur

Kontron

Kontron CPCI-MXS Manuel du produit

Kontron

Kontron MOPSlcdLX Manuel utilisateur

Kontron

Kontron MOPS/386A Manuel utilisateur

Kontron

Kontron KTQ67/Flex Manuel utilisateur

Kontron

Kontron microETXexpress-DC Manuel utilisateur

Kontron

Kontron CP6930 Manuel utilisateur

Kontron

Kontron ePanel-C3 Manuel utilisateur

Kontron

Kontron AT8901 Manuel utilisateur

Kontron

Kontron MOPSlcdLX Manuel utilisateur

Kontron

Kontron KBox F-420-WLU Manuel utilisateur

Kontron

Kontron nanoETXexpress-SP Manuel utilisateur

Kontron

Kontron AT8402 Manuel utilisateur

Kontron

Kontron AdvancedMC AM4211 Manuel utilisateur

Kontron

Kontron MUNGO560 Manuel utilisateur

Kontron

Kontron pITX-iMX8M Manuel utilisateur

Kontron

Kontron CP6005-SA Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Kontron

Kontron COM Express Eval 10 Manuel utilisateur

Kontron

Kontron CP6003-SA Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

Advantech

Advantech ASMB-935 Series Manuel utilisateur

Jupiter

Jupiter RAM PACK Manuel utilisateur

Kontron ePCI-201 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques