Kontron USB-16REL Manuel utilisateur

www.kontron.com

USB-16REL

User’s Guide

Manual PN: 931-0057-00-A

May 2002

Customer Service

Mailing Address: Kontron - United States

6260 Sequence Drive

San Diego, CA 92121 USA

Tel: 858-677-0877

Fax: 858-677-0895

Technical Support: U.S. and Canadian Customers - 24 hours a day

Tel: 800-480-0044, option 1

Fax: 858-677-0898

International Customers - 9am to 4pm local time

Tel: (+49) 8165-77 112

Fax: (+49) 8165-77 110

Visit our site at: www.kontron.com

The information in this user’s guide is provided for reference only. Kontron does not assume

any liability arising out of the application or use of the information or products described

herein. This user’s guide may contain or reference information and products protected by

copyrights or patents and does not convey any license under the patent rights of Kontron, nor

the rights of others.

Kontron is a registered trademark of Kontron. All trademarks, registered trademarks, and

trade names used in this user’s guide are the property of their respective owners. All rights

reserved. Printed in the United States of America and Canada. This user’s guide contains

information proprietary to Kontron. Customers may reprint and use this user’s guide in other

publications. Customers may alter this user’s guide and publish it only after they remove the

Kontron name, cover, and logo.

Kontron reserves the right to make changes without notice in product or component design as

warranted by evolution in user needs or progress in engineering or manufacturing technology.

Changes which affect the operation of the unit will be documented in the next revision of this

user’s guide.

iiiUSB-16REL User’s Guide

ää

äContents

Safety Instructions

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Preventing Electrostatic Discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Preface

How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Customer Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

Advisory Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

Regulatory Compliance Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv

Guarantee and Warranty Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

Return Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii

Limitation of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix

Chapter 1

Introduction

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

What’s Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Chapter 2

Installation

Software Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Windows 95/98/2000/ME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

System Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Chapter 3

Technical Description

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Reed Relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Relay Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Chapter 4

Software and Programming

Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

3rd Party Software Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

iv USB-16REL User’s Guide

Application Programmers Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Serial String. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Relative Addressing vs. Absolute Addressing . . . . . . . . . . . . . . . . . . . . . . 4-4

Table 4-1. Addressing Tables

(R=Read, W=Write, R/W = Read or Write) . . . . . . . . . . . . . . . . . 4-5

Pin Assignments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Table 4-2. Removable Terminal Block Pin Assignments . . . . . . 4-6

Chapter 5

Specifications

Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Mean Time Between Failures (MTBF) . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Appendix A

Troubleshooting

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Appendix B

Board Layout

Layout Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3

Declaration of Conformity

ää

äSafety Instructions

Contents

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Preventing Electrostatic Discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

vi USB-16REL User’s Guide

This page intentionally left blank.

vii

USB-16REL User’s Guide

Safety Instructions

Before You Begin

ää

äBefore You Begin

Before handling the USB-16REL, read the instructions and safety guidelines on the following

pages to prevent damage to the product and to ensure your own personal safety. Refer to the

“Advisories” section in the Preface for advisory conventions used in this user’s guide, including

the distinction between Warnings, Cautions, Important Notes, and Notes.

JWhen you disconnect a cable, pull on its connector or on its strain-relief loop, not

on the cable itself. Some cables have a connector with locking tabs. If you are

disconnecting this type of cable, press in on the locking tabs before disconnecting

the cable. As you pull connectors apart, keep them evenly aligned to avoid

bending any connector pins. Also, before connecting a cable, make sure both

connectors are correctly oriented and aligned.

JDo not attempt to service the system yourself except as explained in this manual.

Follow installation and troubleshooting instructions closely.

viii USB-16REL User’s Guide

ää

äPreventing Electrostatic Discharge

A sudden discharge of electrostatic electricity can destroy static-sensitive devices or

micro-circuitry, such as circuit boards and microchips. Proper packaging and grounding

techniques are necessary precautions to prevent damage. Perform service at an ESD workstation

and follow proper ESD procedure to reduce the risk of damage to components. Kontron strongly

encourages you to follow proper ESD procedure, which can include wrist or heel straps and

smocks, when servicing equipment.

You can also take the following steps to prevent damage from electrostatic discharge (ESD):

JWhen unpacking a static-sensitive component from its shipping carton, do not

remove the component’s antistatic packing material until you are ready to install

the component in a computer. Just before unwrapping the antistatic packaging,

be sure you are at an ESD workstation or grounded. This will discharge any static

electricity that may have built up in your body.

JWhen transporting a static-sensitive component, first place it in an antistatic

container or packaging.

JHandle all static-sensitive components at an ESD workstation. If possible, use

antistatic floor pads and workbench pads. Tools and equipment used at an ESD

workstation should be grounded and conductive. Keep work area free of non-

conductive materials, such as plastic and Styrofoam.

JHandle static-sensitive components with care. Don’t touch the components or

contacts on a board. Hold a board by its edges or by its metal mounting bracket.

JTurn off power and input signals before inserting and removing connectors or test

equipment.

JDo not handle or store system boards near strong electrostatic, electromagnetic,

magnetic, or radioactive fields.

JStore static-sensitive components in antistatic containers or packaging.

ää

äPreface

Contents

How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Customer Comments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

Advisory Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

Regulatory Compliance Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv

Guarantee and Warranty Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

Return Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii

Limitation of Liability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix

x USB-16REL User’s Guide

This page intentionally left blank.

Table des matières

Autres manuels Kontron Matériel informatique

Kontron

Kontron SL iMX6UL Manuel utilisateur

Kontron

Kontron PEP CP321 Manuel utilisateur

Kontron

Kontron COMe-bP5020 Manuel utilisateur

Kontron

Kontron KTQ77/Flex Manuel utilisateur

Kontron

Kontron AdvancedTCA AT8001 Manuel utilisateur

Kontron

Kontron AM4024 Manuel utilisateur

Kontron

Kontron CP3002 Manuel utilisateur

Kontron

Kontron COMe-bID7 Manuel utilisateur

Kontron

Kontron BL Pi-Tron CM3+ Manuel utilisateur

Kontron

Kontron COMh-caRP Manuel utilisateur

Kontron

Kontron CP3003-SA Manuel utilisateur

Kontron

Kontron MOPSlcdGX1 Manuel utilisateur

Kontron

Kontron COMh-caRP Manuel utilisateur

Kontron

Kontron COM-HPC Manuel utilisateur

Kontron

Kontron aFLAT Series Manuel utilisateur

Kontron

Kontron CP6003-RA/RC Manuel utilisateur

Kontron

Kontron KBox C-102 Series Manuel utilisateur

Kontron

Kontron COMe-cBTi6R E3845 8GB/16S Manuel utilisateur

Kontron

Kontron KISS Stor Slim Manuel utilisateur

Kontron

Kontron CP3005-SA Manuel utilisateur

Kontron

Kontron ETX -CN8 Manuel utilisateur

Kontron

Kontron CI5TTV Series Manuel utilisateur

Kontron

Kontron 082-0220-00 Backplane Manuel utilisateur

Kontron

Kontron microETXexpress-SP Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

Advantech

Advantech ASMB-935 Series Manuel utilisateur

Jupiter

Jupiter RAM PACK Manuel utilisateur