Kodak Pocket Portable Projector Manuel utilisateur

KODAK Pocket Portable Projector

User Manual

3"H | 3"W | 0.8"D (8 cm | 8 cm | 2 cm)

Please read all directions before using the product and retain this guide for reference.

Thank you for purchasing the KODAK Pocket Portable Projector. This User Guide is intended to provide

you with guidelines to ensure that operation of this product is safe and does not pose risk to the user.

Any use that does not conform to the guidelines described in this User Guide may void the limited

warranty.

Please read all directions before using the product and retain this guide for reference. This product is

intended for household use only.

This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions.

See warranty for details.

1. INTRODUCTION

KODAK Pocket Portable Projector

HDMI® Cable

USB Cable

User Guide

2. BOX CONTENTS

When Using the Projector

• Refer to this user guide and take note of all safety precautions before using your projector.

• Do not place the projector on uneven or unstable surfaces.

• Do not use the projector in any place where it may come into contact with smoke. The residue

from smoke may cause build-up on critical parts of the projector, resulting in damage or

decreased performance.

• Do not use damaged power cords, accessories, and other parts with your projector.

• Keep all parts out of reach of children.

• Do not block or place anything near the projector’s ventilation holes. Doing so may cause internal

heat build-up that can result in degraded picture quality and damage to the projector.

• Always ensure that the operating voltage of your projector matches the voltage of your

power source.

• Do not store your projector in high temperatures, in direct sunlight, or any place where it may

become wet or damp.

• Do not handle this product with wet or damp hands.

• Do not reach for the unit if it has fallen into water. Always unplug it irst.

• Do not use this product in a place where it may fall.

• When using for the irst time, ensure that the projector is plugged into a grounded wall socket.

• Never attempt to short-circuit the battery.

• Discontinue use if leakage is found.

3. SAFETY PRECAUTIONS

When Servicing or Replacing Parts

• Never attempt to disassemble this product. There are no user serviceable parts.

• Do not attempt to remove or disassemble the battery. This will increase the risk of ire or

chemical burns.

• Always take care that the replacement battery is the correct type. Risk of explosion.

• Only use the parts provided by the manufacturer.

TOP VIEW

1. Control Panel Buttons

Use the control panel buttons to navigate the on screen menu.

These buttons are also used to control speciic projector

settings as shown below.

A. Back

B. Conirm / Play / Pause

C. Right / Fast-Forward / Volume+

D. Left / Rewind / Volume–

E. Volume

F. Power Indicator

2. Power Indicator

A. The projector’s current charge is shown by the 4 lights on the side of the control panel. When the

projector is powered on, the lights will lash.

B. Each light represents 25% charge, 1 light indicating low charge, and 4 lights indicating full charge.

C. When charging, the next power level will blink on and o.

D. To view the current charge, press the power button once.

FRONT VIEW

1. Lens

Projects the video or image iles from your input device.

NOTE: Never touch the lens using your hands or any sharp object.

2. Speaker

Plays back the audio from the currently playing video.

REAR VIEW

1. Audio Output

This port allows you to connect an external speaker

or headphones to the projector.

2. USB Input/Power Out

This port allows you to connect a USB lash drive or other external device to the projector.It also

provides up to 5V/2A of voltage and current, allowing you to use the projector to charge a

mobile device.

4. FEATURES

D C

1 2 3 4

3. HDMI® Input

This port is used to connect the HDMI® (High-Deinition Multimedia Interface) connector. It is

compatible with HD DVD, Blu-Ray, and other protected content playback.

NOTE: If the USB and/or microSD™ inputs are used at the same time as the HDMI®, the HDMI® will

take priority.

4. DC Input

This port is used to connect the power adapter (not included). It is used both to provide direct power to

the projector and to charge the internal battery.

NOTE: the power adapter may become warm or hot while in use. Never cover or attempt to touch the

adapter while it is connected to a power source.

RIGHT SIDE

1. Power Button

Press and hold this button for 5 seconds to turn the

projector on or o. Press this button once to view the current charge.

2. Focus Wheel

Turn the focus wheel to adjust the image focus of the projector.

LEFT SIDE

1. MicroSD™ Slot

This slot allows you to insert a microSD™ card, giving

you access to your iles directly from the projector.

2. Air Outlet Vent

When the projector is in use, warm air will exit from this vent.

NOTE: Always take care that the air vents are never blocked by paper, clothing, or any other

obstruction. Blocking the vents may result in overheating of the projector.

BOTTOM VIEW

1. Air Inlet Vent

When the projector is in use, cool air will enter this vent.

NOTE: Always take care that the air vents are never blocked

by paper, clothing, or any other obstruction. Blocking the

vents may result in overheating of the projector.

2. Tripod Dock

This dock allows the projector to be mounted onto a tripod.

3. Rating Label

The speciications of the projector can be found here.

4. Non-Slip Feet

These rubber feet provide additional traction to the projector,

allowing it to be more stable when on a surface.

1 2

1. Charge the Projector

A. Connect the adapter to the micro USB port of the projector, using the included power cord.

B. Plug the adapter into an outlet or other

power source.

C. You may now use the projector.

D. While plugged in, the projector’s battery will

automatically charge. It is recommended that

you allow the projector to charge for at

least 4 hours before using it in battery

mode for the irst time.

5. SETUP

2. Connect an External Device to the Projector

A. Turn on the Projector

Press and hold the power button for 5 seconds

to turn on the projector.

B. Adjust the Focus Wheel

Open a still image and carefully rotate the

focus wheel until the image is clear.

Australia and

Mainland China

USA, Canada,

and Taiwan

Continental

Europe

UK Japan Sweden

AC Power Cord Requirements

Ensure that the correct AC plug type is used, according to your location. If the power cord included

with your projector does not match your local power source, contact your sales dealer.

NOTE: It is recommended that your video source device uses a grounded plug. This will prevent signal

interference from voltage luctuations.

5.0inch

10 inch

20inch

40inch

60inch

80inch

0.25M 0.48M 0.97M 1.95M 2.90M 3.90MDistance

C. Adjust Screen Size

The screen size will increase or decrease as the projector

is brought closer or further from the wall. The chart below

details the correlation between distance and screen size.

After the screen is the desired size, use the

focus wheel to adjust the image clarity.

D. Connect to a an External Device

Your projector can be connected to a variety of external devices using the included HDMI® cable.

Compatible devices include laptops, smart phones, tablets, gaming devices, and more.

a. Connect one end of the HDMI® cable to

the projector.

b. Connect the other end of the HDMI® cable

to the external device.

NOTE: Some devices may require an adapter in

order to connect to the projector. Check the table

below if using a device that is not HDMI® compatible.

1 Devices with HDMI port

2 Devices with mini HDMI port

3 Devices with micro HDMI port

4 iOS devices with lightning port

5Devices with USBC

(USB type C) port

6Devices with USBC

(USB type C) port

6Devices with Screen

Mirroring Function

HDMI to HDMI cable

Mini HDMI to HDMI adapter HDMI to HDMI cable

Lightning digital AV adapter HDMI to HDMI cable

USBC to HDMI adapter HDMI to HDMI cable

USB type C to HDMI cable

Wireless dongle

E. Enable your Computer for External Displays

If your computer does not automatically recognize the projector, it means that you must irst enable

the use of external displays. Each computer is dierent and may require a dierent setup.

To set up Windows 7 for external displays, follow the instructions below.

a. Open the start menu and select the “Control Panel”.

b. Select “Appearance and Personalization”.

c. Under the “Display” section, select “Connect to an external display”.

d. Here you will be able to select your projector as an external display.

To set up a Mac® computer, follow the instructions below.

NOTE: In order to connect a Mac® computer to the projector via HDMI®, an adapter is needed

(not included).

a. Go to the “System Preferences” menu and select “Displays”

b. Select the “Arrangements” tab. Make sure that “Mirror Displays” is checked.

c. After checking “Mirror Displays”, a new window will open. On this display screen,

set the resolution to 1024 x 768.

1. Turn on the Projector

Press and hold the power button to turn on the projector.

2. Playing a Video File

A. After turning on the projector, you will be prompted to select either Movies or Images.

B. Tap the Conirm button to gain access to the control panel, then use the conirm button to

select Movies.

C. You will then be prompted to select either USB or MicroSD™. Use the and buttons to

highlight the format you wish to access. Then tap the conirm button to select.

D. Use the and buttons to cycle through the list of iles. Select the ile you wish to play with the

conirm button.

3. Connect Speakers or Headphones

A. Connect your speakers or headphones

to the projector’s audio output port,

using a 3.5mm cable.

B. Adjust the volume as needed.

4. Insert MicroSD™ Card or USB Drive

Slide the microSD™ card into the microSD™ card

slot until it clicks into place. If using a USB drive,

insert it into the USB input.

6. OPERATION

B C D

3. Video Controls

Before you can use the control panel, you must always tap the conirm button to make it appear irst.

Pause: Tap the conirm button.

Fast Forward: Tap the button. Each tap will increase

the speed by x2, x4, x8, and x16.

Rewind: Tap the button. Each tap will increase the speed

by x2, x4, x8, and x16.

Back: tap the button to return to the video ile list. Tap this

button again to return to the main menu.

Volume Control: Tap the button. Then use the

and buttons to increase or decrease the volume.

4. Playing a Photo File

A. After turning on the projector, you will be prompted to select

either Movies or Images.

B. Tap the conirm button to gain access to the control panel.

C. Use the to highlight the Images option. Then use the conirm button to select Images.

D. You will then be prompted to select either USB or MicroSD™. Use the buttons to highlight

the format you wish to access. Then tap the conirm button to select.

E. Use the left and right buttons to cycle through the list of iles. Select the ile you wish to play with

the conirm button.

C D E

5. Photo Controls

When playing a photo ile, the projector will automatically enter slideshow mode. While in this mode,

each photo in the ile list will automatically play in order.

Pause Slideshow: Tap the conirm button.

Resume Slideshow: Tap the conirm button.

Play Next Image: Tap the button.

Play Previous Image: Tap the button.

Autres manuels pour Pocket Portable Projector

Table des matières

Autres manuels Kodak Projecteur

Kodak

Kodak V600 Manuel utilisateur

Kodak

Kodak FS-10-N Guide de dépannage

Kodak

Kodak DP2000 - Digital Projector Manuel utilisateur

Kodak

Kodak Pocket Pico Projector Manuel utilisateur

Kodak

Kodak Carousel600 Manuel de référence

Kodak

Kodak FLIK X7 Manuel utilisateur

Kodak

Kodak Pocket Portable Projector Manuel utilisateur

Kodak

Kodak DP850 - Ultra Digital Projector Guide de démarrage rapide

Kodak

Kodak Carousel S-AV 1050 Manuel utilisateur

Kodak

Kodak DCS 600 Series Guide de l'utilisateur

Kodak

Kodak FLIK X10 Manuel utilisateur

Kodak

Kodak Carousel S-AV1000 Manuel utilisateur

Kodak

Kodak V600 Manuel utilisateur

Kodak

Kodak Brownie A15 Manuel utilisateur

Kodak

Kodak EKTAGRAPHIC III AM Manuel utilisateur

Kodak

Kodak Carousel 850H Manuel utilisateur

Kodak

Kodak Carousel S-AV 2050 Manuel d'utilisation

Kodak

Kodak KP1500A Manuel utilisateur

Kodak

Kodak CAROUSEL NEW LOOK PROJECTOR Manuel utilisateur

Kodak

Kodak Pageant Manuel utilisateur

Kodak

Kodak EKTAGRAPHIC 220 Manuel utilisateur

Kodak

Kodak Cube Manuel utilisateur

Kodak

Kodak EKTAGRAPHIC III Manuel utilisateur

Kodak

Kodak Carousel S-AV 2010 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur