Kilotech KPC 2000-03A Manuel d'instructions

www.kilotech.com

KPC 2000, Operaons Manual E 12202017, Page 1 of 5

KPC 2000

851167 KPC 2000- 03A

851168 KPC 2000-06A

851169 KPC 2000-15A

KWS-152 (OBSOLETE)

MAN12202017

Quick Start Manual

Contents subject to change without notice

KPC 2000, Operaons Manual E 12202017, Page 2 of 5

Introduction

Thank you for choosing a Kilotech Scale. We appreciate your business and hope that you will enjoy using your

scale. Should you require Technical Support, please contact your local dealer from whom you have purchased.

Avoid lengthy exposure to heat or cold Allow the scale to acclimate to normal room temperature

before use

Allow sucient warm up me Turn the scale on and wait for a few minutes to allow the

internal components a chance to stabilize before weighing

Do not leave a load or weight on a scale for a prolonged

period of me.

Might damage load cell

Do not tamper with the scale yourself This will void the warranty. Contact your local distributor or

Kilotech directly to properly repair your scale

Do not overload beyond the maximum weight limit

Do not pull the plug by its cord when unplugging

Do not use the scale near re or corrosive gas

Unless the scale is waterproof do not spill water or immerse

in water

Avoid placing the scale near a heater It could cause a uctuaon to the indicator reading

Always make sure to use a Kilotech approved adapter

Do not drop the scale or apply a sudden shock

Do not drag the scale

Avoid exposing to other electromagnec devices These devices emit RF and can cause unstable readings. If

your scale should perform poorly, try moving the scale to a

dierent room or locaon

Level the scale or make sure it is on an even surface A scale used on an uneven surface may provide an unstable

reading

Scale should be used within stated temperature

& humidity limits

General Precautions

KPC 2000, Operaons Manual E 12202017, Page 3 of 5

Product Number 851167 KPC 2000- 03A

851168 KPC 2000-06A

851169 KPC 2000-15A

Capacity & Graduaon KPC 2000

03 = 3KG x 0.5 g / 6 lb. x 0.001 lb. Minimum capacity 10g

06 = 6KG X 1 g / 12 lb x 0.002 lb Minimum capacity 20g

15 = 15KG x 2 g / 30 lb x 0.005lb Minimum capacity 40g

KWS 152 15KG x 2g / 30 lb x 0.005lb Minimum capacity 40g

Weighing Modes Lb, kg, g, lb oz, oz

Display Seven red 0.56"seven-segment LED display with eight LED

diodes: ZERO, NET, AC, CHG, LB, KG, G, OZ

Power Rechargeable baery or 110 AC CUL US approved adapter.

Approx. 12 hours of baery life.

Product Dimensions 10"x 11.75"x 4.25"

Plaer Size 9.5"x 8.5"

Operang Temperature / Humidity 10 -35° C

Specifications

KPC 2000, Operaons Manual E 12202017, Page 4 of 5

ZERO/ON/OFF:

• When the scale is o, press the ZERO /ON/OFF key to turn the scale ON. The scale will enter

self-examinaon. The working voltage “x.x Udc” will be displayed. The full capacity will be displayed as

“F3.000kg”, “F6.000kg” or “F15.000kg”.

• When the scale is on, press the ZERO /ON/OFF key for less than 5 seconds. The ZERO key funcon will acvate.

• The Zero key can only be acvated within 5% of the scale’s capacity.

• The scale should be stable and the plaer empty.

• Press the ZERO /ON/OFF key for more than 5 seconds to acvate the ON/OFF funcon

TARE /UNIT:

• Press this buon for less than 5 seconds, the TARE key funcon will acvate. Press this buon for more than

5 seconds, UNIT key funcon will acvate:

• TARE: TARE range for this scale is up to 102%FS. This funcon should be operated when the scale is in stable

mode. When the TARE funcon is acve, the “NET” LED will be on. [Note: (Gross weight = Net weight + Tare

weight ≤102% FS)

• UNIT: To change the weight unit, hold the TARE/UNIT buon for more than 5 seconds or unl your desired

weight unit appears.

CALIBRATION:

• See Calibraon video or Calibraon Manual

AUTO-OFF FUNCTION:

• When the scale is on, simultaneously press and hold down the TARE and ZERO buons for more than

5 seconds ll the “A.oFF.x” is displayed. X = 0,1…9:

• The AUTO-OFF FUNCTION is used to save baery power.

• You can set the amount of me from 0-9 minutes. If you set to 2 minutes, the scale will shut o aer

2 minutes in idle mode.

• When X = 0, the auto-power o funcon is disabled.

• Press the TARE buon to choose the auto-o me and press ZERO buon to conrm and save the seng.

LOW BATTERY SIGNAL:

The scale may be powered by the rechargeable baery or 110 AC CUL US approved adapter. When “Lo.bAt” is dis-

played alternavely, this indicates that the baery is low and will require a charging. The voltage of internal work-

ing is below 5.7V(+0.1V)

KPC 2000, Operaons Manual E 12202017, Page 5 of 5

DISPLAY SYMBOL DEFINITIONS:

------

0 : Power-on zero-point is over (calibraon zero-point) +20%FS) when scale is

turned on, or the reading weight is over (power-on zero-point) +5%FS when pressing ZERO buon;

------

: Power-on zero-point is below (calibraon zero-point) -20%FS) when scale is turned on, or the reading

weight is + (power-on zero-point) -5%FS when pressing ZERO buon;

: the current weight is less than –25% FS;

: the current weight is over 102% FS;

A.ch.E r: analog channel error;

EEP. Er: EEPROM accessing error or data in EEPROM is error or not in their normal range;

x.x Udc: The voltage of internal working is x.xV(+0.1V)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kilotech Échelle

Kilotech

Kilotech Integrator C30 Manuel utilisateur

Kilotech

Kilotech KRS 3000 Manuel utilisateur

Kilotech

Kilotech KPC 5000 Manuel d'instructions

Kilotech

Kilotech Integrator LE.3k Manuel utilisateur

Kilotech

Kilotech KPOS 1530 Manuel utilisateur

Kilotech

Kilotech KWD 750SS Manuel utilisateur

Kilotech

Kilotech KWS 301 Manuel utilisateur

Kilotech

Kilotech Integrator LE.3k Manuel utilisateur

Kilotech

Kilotech KPOS 1530 Manuel utilisateur

Kilotech

Kilotech KPS 60 Manuel utilisateur

Kilotech

Kilotech KWS 301 Manuel utilisateur

Kilotech

Kilotech KIN 500 Manuel utilisateur

Kilotech

Kilotech KPC 5000 Manuel utilisateur

Kilotech

Kilotech Abacus AB30 Manuel utilisateur

Kilotech

Kilotech KHS 200-30 Manuel utilisateur

Kilotech

Kilotech KPS MS Manuel utilisateur

Kilotech

Kilotech KPC 2000 Manuel utilisateur

Kilotech

Kilotech KPC 3K Manuel utilisateur

Kilotech

Kilotech KPC 1000SS Manuel utilisateur

Kilotech

Kilotech Integrator LE.3k Manuel utilisateur

Kilotech

Kilotech KWD 15K Manuel utilisateur

Kilotech

Kilotech KWD 500 Manuel d'utilisation et d'entretien

Kilotech

Kilotech KPC 160 Manuel utilisateur

Kilotech

Kilotech 851340 Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur