Kilotech KWS 301 Manuel utilisateur

KWS 301

OPERATION MANUAL

851243 AND 851253

Contents subject to change without notice

MAN02272020

Ce manuel est disponible en français à www.kilotech.com

TABLE OF CONTENTS

TABLE OF CONTENTS .................................................................................................................. 2

Introduction .............................................................................................................................. 2

General Precautions................................................................................................................... 3

Specifications............................................................................................................................. 4

Outline ...................................................................................................................................... 4

Unpacking and setup ............................................................................................................... 25

Contents.................................................................................................................................. 25

Weighing operations................................................................................................................ 25

Key functions............................................................................................... Error! Bookmark not defined.

Introduction

Thank you for choosing a Kilotech Scale. We appreciate your business and hope that you will enjoy using your

scale. Should you require support, please contact your local dealer from whom you have purchased.

General Precautions

Avoid lengthy exposure to heat

or cold.

Allow the scale to acclimate to normal room temperature before

use.

Allow sufficient warm up time.

Turn the scale on and wait for a few minutes to allow the internal

components a chance to stabilize before weighing.

Do not leave a load or weight

on a scale for a prolonged

period of time.

Do not tamper with the scale

yourself.

This will void the warranty. Contact your local distributor to

properly repair your scale.

Do not disassemble the scale

yourself.

This will void the warranty. Contact your local distributor to

properly repair your scale.

Do not load beyond the

maximum weight limit.

Do not pull the plug by its cord

when unplugging.

Do not use the scale near fire

or corrosive gas.

Do not spill water or immerse

in water.

Avoid placing the scale near a

heater.

It could cause a fluctuation to the indicator reading.

Always make sure to use a

Kilotech approved adapter.

Do not drop the scale or apply

a sudden shock.

Do not drag the scale.

Avoid exposing to other

electromagnetic devices.

These devices emit RF and can cause unstable readings. If your

scale should perform poorly, try moving the scale to a different

room or location.

Level the scale or make sure it

is on an even surface.

A scale used on an uneven surface may provide an unstable

reading.

Scale should be used within

stated temperature.

292mm/11.5"

362mm/14.25"

127mm/5"

279mm/11"

241mm/9.5"

Specifications

Product Number

851243

851253

Product Name

KWS 301-15

KWS 301-30

Capacity

30 LB. / 15 KG

66 LB. / 30 KG

Graduation

0.001 LB. / 0.0005 KG

0.002 LB. / 0.001 KG

Weighing Modes

LB. /KG

Display

6 DIGIT LCD

Back Light

YES

Auto Power Off

Power

AC 110 V OR 220 V DC 6V

Battery

RECHARGEABLE BATTERY 861255

Product Dimensions

11.5 X 14.25 X 5 INCHES

Platter Size

11 X 9.5 INCHES STAINLESS STEEL

Operating Temperature / Humidity

0° C ~40° C/ 32° F ~104° F

Outline

Note that the levelling bubble is situated under the left hand side of the platter and the ON/Off switch is located

on the bottom right hand side of the scale.

Unpacking and setup

Remove the scale from the box and place it on a firm, level surface.

Avoid locations with rapid temperature changes, excessive dust, moisture, air currents, vibrations,

electromagnetic fields, heat or direct sunlight.

NOTE: Ensure that the scale is level each time its location is changed.

Before using the scale for the first time, the internal rechargeable battery should be fully charged for at

least 12 hours.

Allow the instrument to warm up for 30 minutes prior to use.

Connect the supplied AC adapter to the power input receptacle. Plug the AC adapter into a power outlet

and the battery will begin charging. Do not operate the scale with the charger continuously plugged in.

Adapter should be used only for charging purposes.

If the scale will be stored or transported in the future, save the packaging material to ensure the best

possible protection for the scale.

Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s

authority to operate this equipment.

Contents

KWS 301 scale, adapter, rechargeable battery, manual

Weighing Operations

Illustration of display board

1. “~”: Scale is stable.

2. NET: Net weight.

3. “→0←”: Zero.

4. Charge: Red light indicates that the scale is being charged. Green light indicates that the battery is fully

charged.

5. Lb: unit is lb

6. kg/g: unit is kg/g

Function keys

a. This is not a key but a label located on the right hand side of the scale to indicate where the

power switch is.

Calculates the former weighing results

Displays total weight

Unit key allows you to switch between kg or lb

M+

enter

Zero key

Tare key

Clears the record

Operating your scale

A. Getting started

Turn the instrument on by pressing the power switch on.

The display will count down from 999999….while the unit is being updated.

Allow the unit to warm-up for 30 minutes.

B. Taring

All models have taring capabilities up to their total weight capacity.

To weigh a sample in its container, with the display showing the weight of the sample, use the following

procedure.

1. Place an empty container on pan and then press the key. The ▼will point to the NET annunciator

and the weight display will show zero.

2. Place the sample in its container on the scale.

3. When the scale is stable, the display will show the weight of the sample.

4. After taking away the container, a minus value will be displayed on the screen. Press the key to

return to zero.

C. Zeroing

Press the key before weighing the samples to zero the scale.

D. Accumulation function

1. Press the key. Put the item on the platter and press M+. Once you remove the item it will revert

back to zero. Place the second item on the platter and press M+. Repeat this for as many items as you have to

accumulate. Display will show with the weight:

2. The next accumulation will show with the weight:

3.Press the key to show the total times you weighed (i.e. ACC2 for two items) and subsequently the

total weight at the end.

→0

←

→0

←

4.Press the key to delete all the data in the total weight, and return to the normal weight display.

E. Programming the scale

1.Press and hold any key while powering ON, the display will shows

2.Press key the screen shows

3. Auto power off: The scale switches off automatically after the set time period.

Press the key for parameter selection and press the key

for setting the program sequence as follows:

4. Backlight –Press the setting to change the backlight settings.

Press the M+ key to move from Autopower to Backlight settings.

F. Recharging the battery

a. The low battery light ,“LOBAT”, will flash when it is time to recharge your battery. You can use your scale for

about ten hours from the time you are first notified that the battery needs to be recharged.

b. When the message “LOBAT” appears on your LCD screen, turn off the power switch immediately and begin

recharging the battery to prolong its life.

Notes

a. The scale has a built-in charger. Always use the adapter that came with the scale.

b. What the light colors mean:

1. RED –Need to charge the battery

2. Orange –charging is in progress

3. Green –charging is complete.

c. A complete charge takes 8-10 hours.

Autres manuels pour KWS 301

Ce manuel convient aux modèles suivants

Autres manuels Kilotech Échelle

Kilotech

Kilotech KPC 3K Manuel utilisateur

Kilotech

Kilotech KWD 15K Manuel utilisateur

Kilotech

Kilotech KIN 500 Manuel utilisateur

Kilotech

Kilotech KPC-2000 Manuel utilisateur

Kilotech

Kilotech S-2000 Manuel utilisateur

Kilotech

Kilotech Abacus AB30 Manuel utilisateur

Kilotech

Kilotech KRS 3000 Manuel utilisateur

Kilotech

Kilotech KBS Series Manuel utilisateur

Kilotech

Kilotech KWS 2200 Manuel utilisateur

Kilotech

Kilotech KSB series Manuel utilisateur

Kilotech

Kilotech KPS 60 SS Manuel d'utilisation et d'entretien

Kilotech

Kilotech KPC 1500SS Manuel utilisateur

Kilotech

Kilotech KWS 301 Manuel utilisateur

Kilotech

Kilotech 851340 Manuel utilisateur

Kilotech

Kilotech KPC 2000 Manuel utilisateur

Kilotech

Kilotech KRS SWP Series Manuel utilisateur

Kilotech

Kilotech KLE 200 Manuel utilisateur

Kilotech

Kilotech MS-4202L Adult Manuel utilisateur

Kilotech

Kilotech Integrator LE.3k Manuel utilisateur

Kilotech

Kilotech KWS-SW series Manuel utilisateur

Kilotech

Kilotech KPS MS Manuel utilisateur

Kilotech

Kilotech KHA Series Manuel utilisateur

Kilotech

Kilotech KPC 1000SS Manuel utilisateur

Kilotech

Kilotech 851340 Manuel d'installation

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur