Kilotech KPC 1500 SS Manuel utilisateur

KPC 1500 SS

851295

Service Manual

Contents subject to change without

notice

Last edited: August 25th, 2016

TABLE OF CONTENTS

TABLE OF CONTENTS .................................................................................................................. 2

Introduction .............................................................................................................................. 3

Calibration................................................................................................................................. 4

Set selectable units .................................................................................................................... 4

Introduction

Thank you for choosing a Kilotech Scale. We appreciate your business and hope that you will enjoy using your

scale. Should you require Technical Support, please contact your local dealer from whom you have purchased.

General Precautions

Avoid lengthy exposure to heat or cold

Allow the scale to acclimate to normal room temperature

before use

Allow sufficient warm up time

Turn the scale on and wait for a few minutes to allow the

internal components a chance to stabilize before weighing

Do not leave a load or weight on a scale for a prolonged

period of time.

Might damage load cell

Do not tamper with the scale yourself

This will void the warranty. Contact your local distributor or

Kilotech directly to properly repair your scale

Do not overload beyond the maximum weight limit

Do not pull the plug by its cord when unplugging

Do not use the scale near fire or corrosive gas

Unless the scale is waterproof do not spill water or immerse in

water

Avoid placing the scale near a heater

It could cause a fluctuation to the indicator reading

Always make sure to use a Kilotech approved adapter

Do not drop the scale or apply a sudden shock

Do not drag the scale

Avoid exposing to other electromagnetic devices

These devices emit RF and can cause unstable readings. If

your scale should perform poorly, try moving the scale to a

different room or location

Level the scale or make sure it is on an even surface

A scale used on an uneven surface may provide an unstable

reading

Scale should be used within stated temperature

& humidity limits

Calibration

How to calibrate your scale

Before entering calibration mode, press [ON/OFF] to power up the scale for 1 minute.

Enter calibration mode:

Press [ON/OFF] to turn the scale off.

Press both the [ZERO] key and the [ON/OFF] key simultaneously.

Once the display shows CAL, you can release both buttons.

The scale will now display the A/D value.

Zero point calibration:

Wait for the stable indicator to be displayed.

Press the [UNIT] key. The display will show a flashing calibration weight.

Place the calibration weight on the platform.

Once the scale is stable, press the [UNIT] key.

The display will show "-------” followed by the A/D value.

Remove the weight and reboot the scale.

Check for accuracy.

If the calibration is repeatedly incorrect:

1) Replace the batteries,

2) Try a more stable surface or a vibration and interference free location.

Set selectable units

1. Press and hold ZERO and PCS together and power up the scale.

2. Press UNITS to scroll and select the available units: kg, lb ...

3. Select the one you want by pressing ZERO

4. ON indicates the unit you chose.

Autres manuels Kilotech Échelle

Kilotech

Kilotech KWS 2200 Manuel utilisateur

Kilotech

Kilotech KWS 301 Manuel utilisateur

Kilotech

Kilotech KPOS 1530 Manuel utilisateur

Kilotech

Kilotech KPC 5000 Manuel utilisateur

Kilotech

Kilotech KRS SWP Series Manuel utilisateur

Kilotech

Kilotech Integrator LE.3k Manuel utilisateur

Kilotech

Kilotech 851340 Manuel utilisateur

Kilotech

Kilotech KWD 500 Manuel d'utilisation et d'entretien

Kilotech

Kilotech CTR Series Manuel utilisateur

Kilotech

Kilotech KSB series Manuel utilisateur

Kilotech

Kilotech KWD 750SS Manuel utilisateur

Kilotech

Kilotech KPOS 1530 Manuel utilisateur

Kilotech

Kilotech KWD 15K Manuel utilisateur

Kilotech

Kilotech KIN 500 Manuel utilisateur

Kilotech

Kilotech MS-4202L Adult Manuel utilisateur

Kilotech

Kilotech S-2000 Manuel utilisateur

Kilotech

Kilotech 851340 Manuel d'installation

Kilotech

Kilotech KPS 60 SS Manuel d'utilisation et d'entretien

Kilotech

Kilotech Integrator LE.3k Manuel utilisateur

Kilotech

Kilotech KWS-SW series Manuel utilisateur

Kilotech

Kilotech KPC 1500SS Manuel d'utilisation et d'entretien

Kilotech

Kilotech KHS 200-30 Manuel utilisateur

Kilotech

Kilotech KPS MS Manuel utilisateur

Kilotech

Kilotech KPC 160 Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur