Kicker KMFC8 Manuel utilisateur

KMFC65 | KMFC8

KMFC

Loaded Marine Cans

Owner’s Manual

KICKER LOADED MARINE CANS

Owner’s Manual

Authorized KICKER Dealer:

Purchase Date:

Serial Number:

MODEL: KMFC65 | KMFC8

The KICKER KMFC Loaded Marine Cans are the perfect way to bring your music out into the marine or

powersports environment. The KMFC65 and KMFC8 come loaded with the KICKER KM65 and KM8 LED

speakers. The injection-molded ABS enclosures are UV treated, splash resistant, and weather resilient. Mount

the KMFC Loaded Marine Cans in your boat or get creative with a pair of them in the garage, patio, on your 4x4

or Side-by-Side, or in any other ﬂat-mounted application.

KMFC65

KMFC8

8-3/16"

[208mm]

11-1/4"

[285.7mm]

8-1/16"

[204.8mm]

1-5/16"

[33.3mm]

9-3/4"

[247.7mm]

[25.4mm]

4-1/16"

[103.2mm]

9-1/16"

[230.2mm]

[77.8mm]

9-1/2"

[241.3mm]

8-5/8"

[219.1mm]

1/2"

[12.7mm]

7/8"

[22.2mm]

4-1/16"

[103.2mm]

8-15/16"

[227mm]

9-7/8"

[250.8mm]

11/16"

[17.5mm]

1-3/8"

[34.9mm]

[101.6mm]

9-7/16"

[239.7mm]

8-3/4"

[222.2mm]

[177mm]

8-1/8"

[206.4mm]

6-7/8"

[174.5mm]

9-11/16"

[245.6mm]

1-5/16"

[33.3mm]

8-1/2"

[215.9mm]

7-7/8"

[200mm]

[25.4mm]

4-1/16"

[103.2mm]

8-1/4"

[209.6mm]

3-1/16"

[77.8mm]

7-3/8"

[187.3mm]

7-11/16"

[195.3mm]

4-1/16"

[103.2mm]

7/8"

[22.2mm]

1/2"

[12.7mm]

8-11/16"

[220.7mm]

7-1/2"

[190.5mm]

8-3/16"

[208mm]

[101.6mm]

1-3/8"

[34.9mm]

11/16"

[17.5mm]

INSTALLATION

Step 1: Determine the location, placement, and mounting conﬁguration of the KMFC cans onto the

surface to which you are mounting. The KMFC may be mounted to a ﬂat surface at an angle of 0, ±5°,

or ±10°. Spreading the KMFC Loaded Marine Cans apart will provide better stereo performance, and is

usually preferable. When determining the best locations for mounting, be careful to look for obstacles or

obstructions that could complicate mounting the KMFC. Please keep in mind the routing of your speaker

wires as this can affect where you ﬁnally mount your cans. You will need to mark and drill three holes in

the mounting surface at 5/16” (8mm) in diameter; two for the mounting bolts, and one for wire routing.

Use the included mounting hardware as a template. The placement of the holes must line up with the ﬁnal

position of the mounting hardware; ie the holes should be about 90° from the direction the speakers will

be aimed and in-line with the wiring coming from the mounting bracket.

Step 2: Loosely thread the speaker and LED wires through the bottom of the mount base, mount wedge

(if applicable), mount gasket, mounting surface, and the mount plate that will be used to mount the KMFC.

The mounting hardware design provides versatility in vertical positioning to direct the speaker’s output to

the ideal listening position, with the following conﬁgurations available. The mount base and mount wedge

may be rotated 180° from the diagrams shown below to aim the speakers at the opposite angle.

0 Degrees 5 Degrees 10 Degrees

Model: KMFC65 KMFC8

Rated Impedance [Ω] 4 4

Sensitivity [1W, 1m] 90 92

Peak Power Handling [ Watts] 195 300

Continuous Power Handling [Watts RMS] 65 150

Enclosure Diameter/Width [in, cm] 7, 17.8 8-3/16, 20.8

Enclosure Depth [in, cm] 9-11/16, 24.6 11-1/4, 28.5

SPECIFICATIONS

IMPORTANT: You must apply a thin layer of the included anti-seize compound to ALL threaded fasteners

before installation to prevent galling, corrosion, seizing, and to improve gasket performance.

this side facing the mounting

surface in all conﬁgurations

0 Degrees Conﬁguration

washer

5/16” stainless steel socket-head cap

screws (use 1/4” Allen wrench)

mounting surface

mount plate

mount gasket

mount base

mount wedge

Step 3: Align the mounting hardware and begin to fasten the bolts. Use the mount gasket in all mounting

conﬁgurations to ensure a water-resistant seal and to protect from cosmetic damage. You may also install

an additional mount gasket between the mount plate and mounting surface. Make certain the wires have

been fully extended through the mounting hardware and mounting surface before you ﬁnish tightening the

bolts.

Step 4: Connect the speaker wires to your ampliﬁer and LED wires to your +12V and ground sources.

KICKER recommends you solder the connections and secure them with heat shrink.

Black : +12V

Red : Ground

Green : Ground

Blue : Ground

Transparent Blue : Speaker +

Transparent Gray : Speaker –

12V

}Ground

+12V

2A fuse

(max) ≤7”

(17.5cm)

battery

IMPORTANT SAFETY WARNING

Prolonged continuous operation of an ampliﬁer, speaker, or subwoofer in a distorted, clipped or over-

powered manner can cause your audio system to overheat, possibly catching ﬁre and resulting in serious

damage to your components and/or vehicle. Ampliﬁers require up to 4 inches (10cm) open ventilation.

Subwoofers should be mounted with at least 1 inch (2.5cm) clearance between the front of the speaker and

any surface.

Pro Tip: You are one KMA Ampliﬁer and a few cables away from a complete, high-quality system with

rock-solid bottom end as only available from KICKER! Please ask your dealer about KICKER KMA ampliﬁer

upgrades.

Color Combinations: Splice and

combine the ground wires to yield a

different color.

Red Red

Green Green

Blue Blue

Red/Green Lime Green

Red/Blue Magenta

Blue/Green Aquamarine

Red/Green/Blue Blue-White

When hard-wiring the RGB lighting, the black lead is +12V and the red, green, and blue leads are

ground. Splice and combine the ground wires to yield a different color. There are seven colors available,

depending on your wiring conﬁguration. KICKER recommends using the KMLC lighting controller (sold

separately) for more colors, patterns, and special effects.

Buy quality marine speakers in our online store.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Kicker Intervenants

Kicker

Kicker KSS50 Manuel utilisateur

Kicker

Kicker KM44CW Manuel utilisateur

Kicker

Kicker SSMB6 Manuel utilisateur

Kicker

Kicker 41KPWB Manuel utilisateur

Kicker

Kicker KM10 Manuel utilisateur

Kicker

Kicker 45KM604 Manuel utilisateur

Kicker

Kicker KSS50 Manuel utilisateur

Kicker

Kicker KS Series Manuel utilisateur

Kicker

Kicker KSMT25 Manuel utilisateur

Kicker

Kicker BT Cans Manuel utilisateur

Kicker

Kicker PS42 Manuel utilisateur

Kicker

Kicker KM6200 Manuel utilisateur

Kicker

Kicker PSM3 Manuel utilisateur

Kicker

Kicker KPW2 Manuel utilisateur

Kicker

Kicker Street Series Manuel utilisateur

Kicker

Kicker SSMB Series Manuel utilisateur

Kicker

Kicker 47KSMT25 Manuel utilisateur

Kicker

Kicker SS Series Manuel utilisateur

Kicker

Kicker PS5250 Manuel utilisateur

Kicker

Kicker I4.2 Manuel utilisateur

Kicker

Kicker 48KSS269 Manuel utilisateur

Kicker

Kicker KM4 Manuel utilisateur

Kicker

Kicker KPM50 Manuel utilisateur

Kicker

Kicker KMFC Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur