Keysight Technologies IOT8700 Series Manuel utilisateur

Keysight IOT8700 Series

IoT Wireless Test Solution

User'sGuide

Legal and Safety Information 3

Legal Notices 3

Safety Symbols 4

Safety Notices 5

Environmental Conditions 7

Regulatory Information 8

Safety Compliance 8

EMCCompliance 8

Regulatory Markings 8

Sales and Technical Support 10

Getting Started 11

Characteristics 11

To Prepare Instruments for Use 12

Equipment requirements 12

Software Applications and its Prerequisites 12

Licensing 13

License Redemption 14

Front and Rear Panels at a Glance 18

How To... 19

Set Up Hardware 20

Install the Software 21

2 Keysight IOT8700 Series IoT Wireless Test Solution User's Guide

Legal and Safety Information

Legal Notices

Safety Notices

Safety Symbols

Legal Notices

No part of this manual may be reproduced in any form or by any means (including electronic storage

and retrieval or translation into a foreign language) without prior agreement and written consent from

Keysight Technologies Inc. as governed by United States and international copyright laws.

Manual Part Number

X8721-90001

Edition

Edition 1, December 2020

Published By

Keysight Technologies

Bayan Lepas Free Industrial Zone

11900 Penang, Malaysia

Warranty

The material contained in this document is provided "as is," and is subject to being changed, without

notice, in future editions. Further, to the maximum extent permitted by applicable law, Keysight

disclaims all warranties, either express or implied, with regard to this manual and any information

contained herein, including but not limited to the implied warranties of merchantability and fitness for

a particular purpose. Keysight shall not be liable for errors or for incidental or consequential damages

in connection with the furnishing, use, or performance of this document or of any information contained

herein. Should Keysight and the user have a separate written agreement with warranty terms

covering the material in this document that conflict with these terms, the warranty terms in the

separate agreement shall control.

Certification

Keysight Technologies certifies that this product met its published specifications at time of shipment

from the factory. Keysight Technologies further certifies that its calibration measurements are

Keysight IOT8700 Series IoT Wireless Test Solution User's Guide 3

Legal and Safety Information

traceable to the United States National Institute of Standards and Technology, to the extent allowed

by the Institute's calibration facility, and to the calibration facilities of other International Standards

Organization members.

U.S. Government Rights

The Software is "commercial computer software," as defined by Federal Acquisition Regulation (“FAR”) 2.101. Pursuant to

FAR 12.212 and 27.405-3 and Department of Defense FAR Supplement (“DFARS”) 227.7202, the U.S. government acquires

commercial computer software under the same terms by which the software is customarily provided to the public.

Accordingly, Keysight provides the Software to U.S. government customers under its standard commercial license, which is

embodied in its End User License Agreement (EULA), a copy of which can be found at

http://www.keysight.com/find/sweula. The license set forth in the EULA represents the exclusive authority by which the

U.S. government may use, modify, distribute, or disclose the Software. The EULA and the license set forth therein, does not

require or permit, among other things, that Keysight: (1) Furnish technical information related to commercial computer

software or commercial computer software documentation that is not customarily provided to the public; or (2) Relinquish

to, or otherwise provide, the government rights in excess of these rights customarily provided to the public to use, modify,

reproduce, release, perform, display, or disclose commercial computer software or commercial computer software

documentation. No additional government requirements beyond those set forth in the EULA shall apply, except to the extent

that those terms, rights, or licenses are explicitly required from all providers of commercial computer software pursuant to

the FAR and the DFARS and are set forth specifically in writing elsewhere in the EULA. Keysight shall be under no obligation

to update, revise or otherwise modify the Software. With respect to any technical data as defined by FAR 2.101, pursuant to

FAR 12.211 and 27.404.2 and DFARS 227.7102, the U.S. government acquires no greater than Limited Rights as defined in

FAR 27.401 or DFAR 227.7103-5 (c), as applicable in any technical data

Declaration of Conformity

Declarations of Conformity for this product and for other Keysight products may be downloaded from

the Web. Go to http://www.keysight.com/go/conformity and click on "Declarations of Conformity".

You can then search by product number to find the latest Declaration of Conformity.

Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

This product complies with the WEEE Directive 2002/96/EC marketing requirement. The affixed

product label (see below) indicates that you must not discard this electrical or electronic product in

domestic household waste.

Product Category: With reference to the equipment types in the WEEE directive Annex 1, this product

is classified as "Monitoring and Control instrumentation" product.

Do not dispose in domestic household waste.

To return this unwanted instrument, contact your nearest Keysight Service Center,

or visit http://about.keysight.com/en/companyinfo/environment/takeback.shtml for

more information.

Safety Symbols

A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that,

if not correctly performed or adhered to, could result in personal injury or DEATH. Do not proceed beyond a

WARNING notice until the indicated conditions are fully understood and met.

Legal and Safety Information

4 Keysight IOT8700 Series IoT Wireless Test Solution User's Guide

A CAUTION notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that,

if not correctly performed or adhered to, could result in damage to the product or loss of important data. Do

not proceed beyond a CAUTION notice until the indicated conditions are fully understood and met.

Direct current

Alternating current

Frame or chassis terminal

Standby supply. Unit is not completely disconnected from AC mains when switch is off.

Risk of electric shock

Risk of danger (refer to this manual for specific Warning or Caution

information)

Protective earth (ground) terminal

Safety Notices

The following general safety precautions must be observed during all phases of operation of this

instrument. Failure to comply with these precautions or with specific warnings or instructions

elsewhere in this manual violates safety standards of design, manufacture, and intended use of the

instrument. Keysight Technologies assumes no liability of the customer’s failure to comply with the

requirements.

General

Do not use this product in any manner not specified by the manufacturer. The protective

features of this product may be impaired if it is used in a manner not specified in the

operating instructions.

Environmental Conditions

Never use the instrument outside of the specified environmental conditions described

under Environmental Conditions.

Ground the Instrument

This product is provided with protective earth terminals. To minimize shock hazard, the

instrument must be connected to the AC mains through a grounded power cable, with

the ground wire firmly connected to an electrical ground (safety ground) at the power

outlet. Any interruption of the protective (grounding) conductor or disconnection of the

protective earth terminal will cause a potential shock hazard that could result in injury

or death.

Keysight IOT8700 Series IoT Wireless Test Solution User's Guide 5

Legal and Safety Information

Do Not Operate in an Explosive Atmosphere

Do not operate the instrument in the presence of flammable gases or fumes.

Do Not Remove the Instrument Cover

Only qualified, service-trained personnel who are aware of the hazards involved should

remove covers. Always disconnect external power.

Do Not Modify the Instrument

Do not install substitute parts or perform any unauthorized modification to the product.

Return the product to a Keysight Sales and Service Office for service and repair to

ensure that safety features are maintained.

Fuses

The instrument contains an internal fuse, which is not customer accessible.

Cleaning

To prevent electric shock, always unplug the unit before cleaning. Use a dry cloth or

one slightly dampened with water to clean the external case parts. Do not use

detergent or chemical solvents. Do not attempt to clean internally.

In Case of Damage

Instruments that are not functioning correctly, appear damaged or defective should be

made inoperative and secured against unintended operation until they can be repaired

by qualified service personnel.

Legal and Safety Information

6 Keysight IOT8700 Series IoT Wireless Test Solution User's Guide

Environmental Conditions

The X8721A is designed for indoor use and in an area with no condensation. The table below shows

the general environmental requirements for this instrument.

Environmental condition

Temperature Operating condition

0 to 40 °C

Storage condition

–40 to 70 °C

Humidity Operating condition

Up to 80% relative humidity at 40°C (non-condensing)

Storage condition

Up to 95% relative humidity at 40°C (non-condensing)

Altitude Up to 2000 m

Pollution degree 2

Environmental Conditions

Keysight IOT8700 Series IoT Wireless Test Solution User's Guide 7

Regulatory Information

Safety Compliance

- Low Voltage Directive (2014/35/EU)

- EN 60950-1: 2005 / EN 60950-1:2006

The safety standard applies to the external AC/DC power adapter provided.

EMCCompliance

- EMC Directive (2014/30/EU)

- IEC 61326-1:2012 / EN 61326-1:2013

- Canada: ICES/NMB-001:2006

- Australia/New Zealand: AS/NZS CISPR 11:2011

Regulatory Markings

Symbols/Markings Description

The CE mark is a registered trademark of the European Community. This CE mark shows that the product complies

with all the relevant European Legal Directives.

ISM 1-A indicates that the instrument is an Industrial Scientific and Medical Group 1 Class A product (CISPER 11,

Clause 4).

This symbol indicates the time period during which no hazardous or toxic substance elements are expected to leak or

deteriorate during normal use. Forty years is the expected useful life of the product.

This symbol is a South Korean Class A EMC Declaration, with productidentification code R-R-Kst-GM20713.

This equipment is suitable for professional use and is for use in electromagnetic environment outside of the home.

A급 기기 ( 업무용 방송통신기자재 )

This equipment has been conformity assessed for use in business environments. In a residential environment this

equipment may cause radio interference.

Regulatory Information

8Keysight IOT8700 Series IoT Wireless Test Solution User's Guide

ICES/NMB-001 indicates that this ISM device complies with the Canadian ICES-001. Cet appareil ISM est conforme a

la norme NMB-001 du Canada.

The RCM mark is a registered trademark of the Spectrum Management Agency of Australia. This signifies compliance

with the Australia EMC Framework regulations under the terms of the Radio Communication Act of 1992.

This instrument complies with the WEEE Directive (2002/96/EC) marking requirement. This affixed product label

indicates that you must not discard this electrical or electronic product in domestic household waste.

With reference to the equipment types in the WEEE directive Annex 1, this instrument is classified as a “Monitoring and

Control Instrument” product.

To return this unwanted instrument, contact your nearest Keysight Service Center, or visit

http://about.keysight.com/en/companyinfo/environment/takeback.shtml for more information.

Keysight IOT8700 Series IoT Wireless Test Solution User's Guide 9

Regulatory Information

Sales and Technical Support

To contact Keysight for sales and technical support, refer to the support links onthe following

Keysight websites:

lwww.keysight.com/find/IOT8720

(product-specific information and support, software and documentation updates)

lwww.keysight.com/find/assist

(worldwide contact information for repair and service)

Sales and Technical Support

10 Keysight IOT8700 Series IoT Wireless Test Solution User's Guide

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Keysight Technologies Équipement de test

Keysight Technologies

Keysight Technologies U3022AM42 Manuel

Keysight Technologies

Keysight Technologies Infiniium 90000A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies U3042AM04 Manuel

Keysight Technologies

Keysight Technologies U9361C Manuel utilisateur

Keysight Technologies

Keysight Technologies Z Series Manuel utilisateur

Keysight Technologies

Keysight Technologies 85054B Manuel

Keysight Technologies

Keysight Technologies U3022BH10 Manuel

Keysight Technologies

Keysight Technologies E4982A Manuel utilisateur

Keysight Technologies

Keysight Technologies RF PA/FEM Guide de l'utilisateur

Keysight Technologies

Keysight Technologies 16454A Manuel d'utilisation

Keysight Technologies

Keysight Technologies InfiniiVision 6000 X Series Manuel utilisateur

Keysight Technologies

Keysight Technologies 85058E Manuel

Keysight Technologies

Keysight Technologies U3047AM08 Manuel

Keysight Technologies

Keysight Technologies 11644A Series Manuel

Keysight Technologies

Keysight Technologies i7090 Mode d'emploi

Keysight Technologies

Keysight Technologies InfiniiVision 3000 X Series Manuel utilisateur

Keysight Technologies

Keysight Technologies InfiniiVision 1000 X-Series Manuel utilisateur

Keysight Technologies

Keysight Technologies Infiniium 9000 Series Manuel utilisateur

Keysight Technologies

Keysight Technologies U3022AE10 Manuel

Keysight Technologies

Keysight Technologies InfiniVision 6000L Series Manuel utilisateur

Keysight Technologies

Keysight Technologies N5511A Manuel utilisateur

Keysight Technologies

Keysight Technologies Z5623A Option H01 Manuel utilisateur

Keysight Technologies

Keysight Technologies 85051B Manuel

Keysight Technologies

Keysight Technologies 85059V Manuel de service

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur