Keysight Technologies DP001 A Series Manuel utilisateur
DP0010A/11A/12A/13A
Differential Active Probes
User’s Guide
Ihr Ansprechpartner /
Your Partner:
dataTec AG
E-Mail: [email protected]
>>> www.datatec.eu
Premium Plus Distribution Partner
Notices
© Keysight Technologies, 2021-2022
No part of this manual may be reproduced in
any form or by any means (including elec-
tronic storage and retrieval or translation
into a foreign language) without prior agree-
ment and written consent from Keysight
Technologies, Inc. as governed by United
States and international copyright laws.
Manual Part Number
DP0010-97000
Edition
Second Edition, August 2022
Published by:
Keysight Technologies, Inc.
1900 Garden of the Gods Road
Colorado Springs, CO 80907 USA
Warranty
The material contained in this docu-
ment is provided “as is,” and is subject
to being changed, without notice, in
future editions. Further, to the maxi-
mum extent permitted by applicable
law, Keysight disclaims all warranties,
either express or implied, with regard
to this manual and any information
contained herein, including but not
limited to the implied warranties of
merchantability and fitness for a par-
ticular purpose. Keysight shall not be
liable for errors or for incidental or
consequential damages in connection
with the furnishing, use, or perfor-
mance of this document or of any infor-
mation contained herein. Should
Keysight and the user have a separate
written agreement with warranty terms
covering the material in this document
that conflict with these terms, the war-
ranty terms in the separate agreement
shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accor-
dance with the terms of such license.
U.S. Government Rights
The Software is "commercial computer soft-
ware," as defined by Federal Acquisition
Regulation ("FAR") 2.101. Pursuant to FAR
12.212 and 27.405-3 and Department of
Defense FAR Supplement ("DFARS")
227.7202, the U.S. government acquires
commercial computer software under the
same terms by which the software is cus-
tomarily provided to the public. Accordingly,
Keysight provides the Software to U.S. gov-
ernment customers under its standard com-
mercial license, which is embodied in its
End User License Agreement (EULA), a copy
of which can be found at
http://www.keysight.com/find/sweula. The
license set forth in the EULA represents the
exclusive authority by which the U.S. gov-
ernment may use, modify, distribute, or dis-
close the Software. The EULA and the
license set forth therein, does not require or
permit, among other things, that Keysight:
(1) Furnish technical information related to
commercial computer software or commer-
cial computer software documentation that
is not customarily provided to the public; or
(2) Relinquish to, or otherwise provide, the
government rights in excess of these rights
customarily provided to the public to use,
modify, reproduce, release, perform, dis-
play, or disclose commercial computer soft-
ware or commercial computer software
documentation. No additional government
requirements beyond those set forth in the
EULA shall apply, except to the extent that
those terms, rights, or licenses are explicitly
required from all providers of commercial
computer software pursuant to the FAR and
the DFARS and are set forth specifically in
writing elsewhere in the EULA. Keysight
shall be under no obligation to update,
revise or otherwise modify the Software.
With respect to any technical data as
defined by FAR 2.101, pursuant to FAR
12.211 and 27.404.2 and DFARS 227.7102,
the U.S. government acquires no greater
than Limited Rights as defined in FAR 27.401
or DFAR 227.7103-5 (c), as applicable in any
technical data. 52.227-14 (June 1987) or
DFAR 252.227-7015 (b)(2) (November
1995), as applicable in any technical data.
Safety Notices
CAUTION
A CAUTION notice denotes a hazard.
It calls attention to an operating
procedure, practice, or the like that,
if not correctly performed or
adhered to, could result in damage
to the product or loss of important
data. Do not proceed beyond a CAU-
TION notice until the indicated con-
ditions are fully understood and
met.
WARNING
A WARNING notice denotes a haz-
ard. It calls attention to an operat-
ing procedure, practice, or the like
that, if not correctly performed or
adhered to, could result in personal
injury or death. Do not proceed
beyond a WARNING notice until the
indicated conditions are fully
understood and met.
3
Contents
1Overview
Introduction 6
Key Features 6
Compatibility with Keysight Oscilloscopes 8
Standard Accessories 9
Orderable Accessories 11
Replacement Accessory Kit (DP0021A-001) 11
Ordering Individual Accessories 11
Optional Accessories 12
Deskew and Performance Verification Fixture Kit (DP0020A) 12
2 Characteristics and Specifications
Electrical Specifications and Characteristics 14
Environmental Characteristics 16
Mechanical Characteristics 17
Accessories Dimensions 17
3 Setting up and Using DP0010A/12A/13A Probes
Connecting the Probe to an Oscilloscope 22
Using Channel Identification Rings 22
Configuring Probe Settings on the Oscilloscope Software GUI 23
Configuring Offset Behavior 23
Calibrating your Probe 25
Making DUT Connections using Probe Accessories 29
DUT Connectivity Options 29
Probing Ungrounded Devices 32
Probing Setup for Single-Ended Measurements 32
4 Safety and Regulatory Information
Safety Checks and Warnings 34
Instrument Markings and Symbols 36
Cleaning the Probe 38
5 Performance Plots
Measured Versus Modeled Input Impedance 40
Voltage Derating Curve 41
4 DP0010A/11A/12A/13A Differential Active Probes User’s Guide
Common Mode Rejection Ratio over Frequency 42
Frequency Response 43
Low Attenuation Frequency Response (without probing accessories) 43
High Attenuation Frequency Response (without probing accessories) 44
Frequency Response (with Adjustable Probing Browser Accessory) 45
6 Performance Verification
Before you Start 48
Recommended Test Interval 48
To Verify Bandwidth 49
Required Test Equipment 49
Procedure 49
To Verify Input Resistance 55
Required Test Equipment 55
Procedure 55
Performance Test Record 58
7 Returning the Probe for Repair/Service
Contacting Keysight Technologies for Technical Assistance 60
Index
6 DP0010A/11A/12A/13A Differential Active Probes User’s Guide
1Overview
Introduction
The DP0010A/11A/12A/13A probes are mid-voltage differential active probes that
you can use with a Keysight oscilloscope having 50 Ωinput impedance. The probe
comes with the AutoProbe I interface to connect to the oscilloscope. This interface
provides the probe power, offset, and auto-configuration of probe type and
attenuation setting on connection.
Figure 1 DP0013A probe (shown connected to one of its standard accessories)
Key Features
•Supports Differential and Single-ended Measurements: You can use these probes to
measure differential as well as single-ended signals. See page 32 to know
more.
•Auto Attenuation Ranges: These probes support two auto attenuation ranges
(~17:1 and ~85:1). The probe’s attenuation is automatically set to the value
necessary to make the dynamic range of the probe greater than or equal to the
level required to measure the input signal. The input range is automatically
configured depending on the vertical scale of the oscilloscope. For
volts/division setting <=2 V/div, the attenuation range of ~17:1 is applicable
and for volts/division setting >2 V/div, the attenuation range of ~85:1 is
applicable. Based on these ranges, the attenuation for the probe is set when
the probe is calibrated. You can view the attenuation setting for the probe in the
Infiniium/InfiniiVision software GUI.
Output Connector
(with AutoProbe I
Interface)
Adjustable Probing Browser
(one of the accessories
supplied with the probe)
Probe Tip
(sockets can fit 0.025 inch
header pins with 0.100 inch
pitch)
Ground Connection
Overview 1
DP0010A/11A/12A/13A Differential Active Probes User’s Guide 7
•DUT Connectivity Options: You can connect the probe tip either directly to DUT
header pins or use the supplied/optional accessories as per your probing
scenario.
These probes support a variety of accessories to suit various DUT connection
scenarios and to make the connection to compact target devices possible. See
page 9 for standard accessories that are shipped with these probes. Additional
accessories are also available for these probes that you can order separately
(see page 11 for optional accessories).
•Easy Deskew and Performance Verification: You can easily deskew/calibrate and
verify performance of these probes using the DP0020A Deskew and
Performance Verification kit. This PV fixture comes with header pins
preinstalled on it. You can simply connect the probe tip either directly to these
header pins or use one of the probe accessories. See page 26 to know more.
CAUTION
Before using these probes, refer to “Safety and Regulatory
Information" on page 33.
8 DP0010A/11A/12A/13A Differential Active Probes User’s Guide
1Overview
Compatibility with Keysight Oscilloscopes
Is your oscilloscope software up-to-date?
Keysight periodically releases software updates to support your probe, fix known defects, and
incorporate product enhancements. To download the latest firmware, go to www.Keysight.com and
search for your oscilloscope’s model number. Click the “Drivers, Firmware & Software” tab under the
Technical Support link.
Compatible Oscilloscopes Adapter(s) Required
Required Software
Version
Infiniium Oscilloscopes
EXR-Series None Infiniium 11.25 or higher
MXR-Series None Infiniium 11.25 or higher
S-Series None Infiniium 6.71 or higher
V-Series N5442A adapter Infiniium 6.71 or higher
Z-Series N5442A adapter Infiniium 6.71 or higher
UXR-Series (3.5 mm models) N5442A adapter Infiniium 11.25 or higher
UXR-Series (1 and 1.85 mm
models)
N5442A + N2852A adapters Infiniium 11.25 or higher
InfiniiVision Oscilloscopes
3000T X-Series None InfiniiVision 7.50 or higher
4000 X-Series
6000 X-Series
Overview 1
DP0010A/11A/12A/13A Differential Active Probes User’s Guide 9
Standard Accessories
The accessories shown below ship standard with these probes. You can use these
accessories interchangeably across DP0010A/11A/12A/13A probes.
WARNING
Use only Keysight approved accessories with these probes.
Standard Accessory Use
Probe Tip Saver
(2 pieces)
Use on the probe tip to avoid
damaging the tip from
repeated attach / detach
when probing directly using
the probe tip.
Adjustable Probing
Browser
(2 pieces)
Adjustable tip to support
different circuit geometries.
Max. tip span: 8.6 mm
Straight Pin
(set of 10 pins)
Insert the pins into the probe
tip.
Solder-in Y-lead Tip
(2 pieces)
Solder-in tip is intended to be
soldered directly to your test
device.
Solder the tip end to the
circuit board /device and then
connect the snap-on end to
the probe.
Socketed Y-lead Tip
(2 pieces)
The tip with two sockets that
can attach to:
- 0.8 mm round pins
- 0.64 mm square pins
10 DP0010A/11A/12A/13A Differential Active Probes User’s Guide
1Overview
Micro Circuit Hook
Test Clips
(2 pieces)
To probe miniature IC and
components. Attach these
clips to the two sockets of the
socketed Y-lead tip.
Ground Lead
(1 piece)
90osocketed lead to connect
the DUT ground to the probe
ground. This is needed if the
DUT is not grounded to the
oscilloscope via the AC mains
ground (see page 32 ).
Standard Accessory Use
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels Keysight Technologies Équipement de test
Keysight Technologies
Keysight Technologies U3022AH10 Manuel
Keysight Technologies
Keysight Technologies N8241 Manuel utilisateur
Keysight Technologies
Keysight Technologies 85058E Manuel
Keysight Technologies
Keysight Technologies 85059A Manuel de service
Keysight Technologies
Keysight Technologies Infiniium 9000 Series Manuel utilisateur
Keysight Technologies
Keysight Technologies B1542A Pulsed IV Package Manuel utilisateur
Keysight Technologies
Keysight Technologies U9361G Manuel utilisateur
Keysight Technologies
Keysight Technologies 85058V Manuel
Keysight Technologies
Keysight Technologies N1091 CA Series Manuel utilisateur
Keysight Technologies
Keysight Technologies Infiniium 90000A Series Manuel utilisateur
Keysight Technologies
Keysight Technologies 8490D Manuel de service
Keysight Technologies
Keysight Technologies U3020AS22 Manuel
Keysight Technologies
Keysight Technologies 16192A Manuel d'utilisation
Keysight Technologies
Keysight Technologies 16117B Manuel d'utilisation
Keysight Technologies
Keysight Technologies N5222-60124 Manuel d'installation et d'exploitation
Keysight Technologies
Keysight Technologies InfiniiVision 6000 X Series Manuel utilisateur
Keysight Technologies
Keysight Technologies 85052C Manuel
Keysight Technologies
Keysight Technologies E7515B UXM 5G Manuel utilisateur
Keysight Technologies
Keysight Technologies X Series Manuel utilisateur
Keysight Technologies
Keysight Technologies N7700 Manuel utilisateur
Keysight Technologies
Keysight Technologies InfiniiVision 1000 X-Series Manuel utilisateur
Keysight Technologies
Keysight Technologies X Series Manuel d'installation et d'exploitation
Keysight Technologies
Keysight Technologies E6640A Manuel utilisateur
Keysight Technologies
Keysight Technologies U3047AM08 Manuel
Manuels Équipement de test populaires d'autres marques
SMART
SMART KANAAD SBT XTREME 3G Series Manuel utilisateur
Agilent Technologies
Agilent Technologies BERT Serial Manuel utilisateur
Agilent Technologies
Agilent Technologies N3280A Manuel utilisateur
Vernier
Vernier Go Direct Voltage Manuel utilisateur
Lifeloc
Lifeloc R.A.D.A.R. Manuel utilisateur
Fluke
Fluke T5-600 Instructions d'utilisation et d'installation
