Keysight Technologies EPM Series Manuel utilisateur

Keysight Technologies

EPM and EPM-P Series Power Meters

E-Series Power Sensors

Configuration Guide

Introduction

This configuration guide describes the standard configurations, options, and compatible accessories of

EPM Series and EPM-P Series power meters. For full specifications, see EPM Series Power Meters E-Series

and 8480 Series Power Sensors - Data Sheet (Keysight literature number 5965-6382E) or E4 416 A /E4 417A

EPM-P Series Power Meters and E-Series E9320 Peak and Average Power Sensors – Data Sheet (Keysight

literature number 5980

1469E

)

. Contact your local Keysight Technologies, Inc. representative at the offices

listed on the back of this guide if you need more information.

EPM Series power meters

– N1913A power meter (single channel)

– N1914A power meter (dual channel)

EPM-P Series power meters

– E4416A power meter (single channel)

– E4417A power meter (dual channel)

E-Series power sensors

– E441xA CW power sensors (10 MHz to 26.5 GHz, sensor dependent)

– E9300 average power sensors (9 kHz to 18 GHz, sensor dependent)

– E9320 peak and average power sensors (50 MHz to 18 GHz, sensor dependent)

03 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide

EPM-P Series Power Meters

The EPM-P Series power meters provide peak, peak-to-average ratio, average, and time-gated

power measurements. For peak, peak-to-average ratio, and time-gated measurements, the

EPM-P Series power meters must operate with the E-Series E9320 power sensors. For average

power measurements only, the EPM-P Series power meters are compatible with all the 8480

Series power sensors, the E-Series CW, the E-Series E9300 average power sensors, and the

E-Series E9320 power sensors.

The standard E4416A and E4417A power meters include:

– Single-channel power meter, order E4416A or dual-channel power meter, order E4417A

– Input sensor connector(s) on the front panel

– Reference calibrator connector on the front panel

– Power sensor cable, 1.5 m (5 ft). (One per E4416A, two per E4417A)

– Libraries Media Suite CD-ROM

– Documentation CD-ROM

– Power cord (plug matches destination requirements)

EPM Series Power Meters

The EPM Series power meters provide average power measurements.

The standard N1913A and N1914A power meters include:

– Single-channel power meter, order N1913A or dual-channel power meter, order N1914A

– Input sensor connector(s) on the front panel

– Reference calibrator connector on the front panel

– Power sensor cable, 1.5 m (5 ft) (One per N1913A, two per N1914A)

– USB cable Type A to Mini-B, 6 ft

– Documentation CD-ROM

– Keysight Instrument Control DVD

– IO Libraries Suite

– Command Expert

– BenchVue Software Platform

– 30-day free trial of BenchVue Power Meter/Sensor Control and Analysis app

– Standard Calibration of Certificate

– Power cord (plug matches destination requirements)

04 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide

E-Series Power Sensors

The standard E4412A and E4413A CW power sensors include:

– Power sensor 10 MHz to 18 GHz, order E4412A, or power sensor 50 MHz to 26.5 GHz, order

E4413A

– English-language Operating and Service Guide

The standard E9300 average power sensors include:

+20 to –60 dBm:

– Power sensor 10 MHz to 18 GHz, order E9300A

– Power sensor 10 MHz to 6 GHz, order E9301A

– Power sensor 9 kHz to 6 GHz, order E9304A

+30 to –50 dBm:

– Power sensor 10 MHz to 18 GHz, order E9300H

– Power sensor 10 MHz to 6 GHz, order E9301H

+44 to –30 dBm:

– Power sensor 10 MHz to 18 GHz, order E9300B

– Power sensor 10 MHz to 6 GHz, order E9301B

– English-language Operating and Service Guide (part number E9300-90009)

The standard E9320 peak and average power sensors include:

– Power sensor, 50 MHz to 6 GHz, 300 kHz bandwidth, order E9321A

– Power sensor, 50 MHz to 6 GHz, 1.5 MHz bandwidth, order E9322A

– Power sensor, 50 MHz to 6 GHz, 5 MHz bandwidth, order E9323A

– Power sensor, 50 MHz to 18 GHz, 300 kHz bandwidth, order E9325A

– Power sensor, 50 MHz to 18 GHz, 1.5 MHz bandwidth, order E9326A

– Power sensor, 50 MHz to 18 GHz, 5 MHz bandwidth, order E9327A

– English-language Operating and Service Guide

Please refer to the N1913A/14A data sheet for more average power sensor selections.

05 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide

Compatibility

Power sensor compatibility

For compatibility of power meters, power sensors, and power sensor cables, please refer to the

table below.

Firmware compatibility

Firmware upgrade information can be accessed from the World Wide Web, free of charge.

Calibration Options

– E441xA/B-A6J - Supplies ANSI Z540 certificate of calibration with data.

– E441xA/B-1A7 - Supplies ISO 17025 certificate of calibration with data.

– N1913/4A-A6J - Supplies ANSI Z540 certificate of calibration with data.

– N1913/4A-1A7 - Supplies ISO 17025 certificate of calibration with data.

– E93xxA/B/H-A6J - Supplies ANSI Z540 certificate of calibration with data.

Power sensors Power meters Power sensor cables

EPM-P Series EPM Series 11730 (grey) E9288 (blue)

E441x family Yes Yes Yes Yes

E9300 family Yes Yes Yes Yes

E9320 family Yes No No Yes

8480 Series Yes Yes Yes Yes

N8480 Series Yes Yes Yes Yes

U8480, U2000 and

U2040 Series (except

U2049X and in Average

Mode only)

No Yes Not applicable Not applicable

06 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide

Hardware Options

The following options are available on the EPM and EPM-P Series power meters. All order

combinations have to be configured upon ordering; these options are not available for field

upgrade.

EPM Series power meter

Option Description

N1913/4A-004 Delete power sensor cable(s)

N1913/4A-101 1Single/dual-channel average power meter

N1913/4A-201 Single/dual-channel average power meter with VGA, trigger in/out, one front and one

rear USB ports

N1913/4A-B01 Without battery (Mandatory for option 201)

N1913/4A-C01 Front calibrator, front sensor (Need to order option 201)

N1913/4A-C02 Front calibrator, parallel front and rear sensor (Need to order option 201)

N1913/4A-C03 Rear calibrator, parallel front and rear sensor (Need to order option 201)

N1913A-200 436A and 437B code compatibility via GPIB interface only. 436A and 437B language

modes are not compatible with LAN or USBTM remote interface. For new N1913A

purchase.

N1914A-200 438A code compatibility via GPIB interface only. 438A language mode is not

compatible with LAN or USBTM remote interface. For new N1914A purchase.

N1913/4A-908 Rack mount kit (one instrument). Can be ordered as standalone.

N1913/4A-909 Rack mount kit (two instruments). Can be ordered as standalone.

BV0007B BenchVue Power Meter/Sensor Control and Analysis app license

N6901A-1FP 436A and 437B code compatibility for N1913A. Post purchase upgrade only.

N6902A-1FP 438A code compatibility for N1914A. Post purchase upgrade only.

1. Option 101 provides the front calibrator and the front sensor(s), and it can’t be ordered with any of the

options B0x/C0x.

EPM-P Series power meter

Option Description

E441xA/B-002 Parallel rear panel sensor input connector(s) and front panel reference calibrator

connector

E441xA/B-003 Parallel rear panel sensor input connector(s) and rear panel reference calibrator

connector

E441xA/B-004 Delete power sensor cable(s)

E441xA/B-908 Rack mount kit (one instrument). Can be ordered as stand-alone.

E441xA/B-909 Rack mount kit (two instruments). Can be ordered as stand-alone.

07 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide

Service and Support Options

Calibration 1

The following calibration options are available:

Option Description

R-50C-011-3 Calibration Assurance Plan - Return to Keysight - 3 years

R-50C-011-5 Calibration Assurance Plan - Return to Keysight - 5 years

R-50C-016-3 ISO 17025 compliant calibration plan, 3 years

R-50C-016-5 ISO 17025 compliant calibration plan, 5 years

R-50C-021-3 ANSI Z540-1-1994 calibration plan, 3 years

R-50C-021-5 ANSI Z540-1-1994 calibration plan, 5 years

1. Options are not available in all countries.

Special Options

Special options for EPM-P Series power meters, EPM Series power meters, and E-Series

sensors are available. The special options provide customized measurement capabilities to fit a

wider range of applications. Contact your local Keysight representative for more information.

Documentation

– The EPM power meters are supplied with a Product Reference CD-ROM which contains the

English-language User’s Guide, Service Guide, Programming Guide, Installation Guide, and

localized versions of the User’s Guide.

– The EPM-P power meters are supplied with a Product Reference CD-ROM which contains

the English-language User’s Guide, Service Guide, Programming Guide, Installation Guide,

and localized versions of the User’s Guide.

– In support of the environmentally-friendly initiative, all printed documents are purchasable

option. The following table shows the option numbers to order the documentation.

Documentation EPM-P series power meter EPM series power meter

User’s Guide and Installation Guide

(English)

E441xA-0B1 N1913/4A-0B1

Programming Guide E441xA-0BF N1913/4A-0BF

Service Guide E441xA-0B3 Not available

Delete manual set E441xA-0B0 N1913/4A-0B0

Add manual set, User’s Guide and

Programming Guide (English)

E441xA-0BK N1913/4A-0BK

Printed User’s Guide in Japanese E441xA-ABJ N1913/4A-ABJ

Documentation E4412/3A E9300 E9320A

Add manual set E4412/3A-0B1 E930xx-0B1 E932xA-0B1

Printed User’s Guide in

Japanese

E4412/3A-ABJ E930xx-ABJ —

08 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide

Available Accessories

E9288A-C power sensor cables (refer to the compatibility section):

– 1.5 meters (5 ft) E9288A

– 3 meters (10 ft) E9288B

– 10 meters (31 ft) E9288C

11730A-F power sensor cables (refer to the compatibility section):

– 1.5 meters (5 ft) 11730A

– 3 meters (10 ft) 11730B

– 6.1 meters (20 ft) 11730C

– 15.2 meters (50 ft) 11730D

– 30.5 meters (100 ft) 11730E

– 61 meters (200 ft) 11730F

Accessory pouch, 34161A

– Holds accessories supplied or ordered

Basic instrument transit case, 34131A

– Protects the power meter during transit

Soft carry/operating case, 34141A

– Power meter with battery option can be operated in soft carry case

Spare battery, N1913/4A-300

– Extra battery for EPM Series power meters with Option 102

Auxiliary Equipment

The 11683A range calibrator verifies the accuracy and linearity of the EPM-P and EPM Series

power meters. Outputs corresponding to the meter readings of 3, 10, 30, 100, and 300 μW and

1, 3, 10, 30, and 100 mW are provided. Calibration uncertainty is ±0.25% on all ranges.

Literature References

Publication title Publication number

EPM-P Series Single and Dual-Channel Power Meters E9320 Family of Peak and

Avera - Technical Overview

5980-1471E

E4416A/E4417A EPM-P Series Power Meters and E-Series E9320 Peak and Average

Power Sensors – Data Sheet

5980-1469E

Agilent EPM-P Series Single and Dual Channel Power Meters – Data Sheet 5988-1605EN

Choosing the Right Power Meter and Sensor - Application Note 5968-7150E

EPM Series Power Meters E-Series and 8480 Series Power Sensors - Data Sheet 5965-6382E

Agilent EPM Series Power Meters - Brochure 5965-6380E

Fundamentals of RF and Microwave Power Measurements - Application Note 5965-6630E

4 Steps for Making Better Power Measurements - Application Note 5965-8167E

Wide dynamic range. Multiple modulation formats. One sensor. - Technical Overview 5968-4960E

Seven Reasons to Migrate from an E4418/4419B to a Keysight N1913/1914A EPM

Series Power Meter - Migration Guide

5990-4016EN

09 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide

www.axiestandard.org

AdvancedTCA®Extensions for Instrumentation and Test (AXIe) is an

open standard that extends the AdvancedTCA for general purpose

and semiconductor test. The business that became Keysight was a

founding member of the AXIe consortium. ATCA®, AdvancedTCA®,

and the ATCA logo are registered US trademarks of the PCI

Industrial Computer Manufacturers Group.

www.lxistandard.org

LAN eXtensions for Instruments puts the power of Ethernet and the

Web inside your test systems. The business that became Keysight

was a founding member of the LXI consortium.

www.pxisa.org

PCI eXtensions for Instrumentation (PXI) modular instrumentation

delivers a rugged, PC-based high-performance measurement and

automation system.

Learn more at

www.keysight.com/find/software

Start with a 30-day free trial.

www.keysight.com/find/free_trials

Download your next insight

Keysight software is downloadable

expertise. From first simulation through

first customer shipment, we deliver the

tools your team needs to accelerate from

data to information to actionable insight.

– Electronic design automation (EDA)

software

– Application software

– Programming environments

– Productivity software

10 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide

This information is subject to change without notice.

Published in USA, April 17, 2018

5990-4173EN

www.keysight.com

For more information on Keysight

Technologies’ products, applications or

services, please contact your local Keysight

office. The complete list is available at:

www.keysight.com/find/contactus

Americas

Canada (877) 894 4414

Brazil 55 11 3351 7010

Mexico 001 800 254 2440

United States (800) 829 4444

Asia Pacific

Australia 1 800 629 485

China 800 810 0189

Hong Kong 800 938 693

India 1 800 11 2626

Japan 0120 (421) 345

Korea 080 769 0800

Malaysia 1 800 888 848

Singapore 1 800 375 8100

Taiwan 0800 047 866

Other AP Countries (65) 6375 8100

Europe & Middle East

Austria 0800 001122

Belgium 0800 58580

Finland 0800 523252

France 0805 980333

Germany 0800 6270999

Ireland 1800 832700

Israel 1 809 343051

Italy 800 599100

Luxembourg +32 800 58580

Netherlands 0800 0233200

Russia 8800 5009286

Spain 800 000154

Sweden 0200 882255

Switzerland 0800 805353

Opt. 1 (DE)

Opt. 2 (FR)

Opt. 3 (IT)

United Kingdom 0800 0260637

For other unlisted countries:

www.keysight.com/find/contactus

(BP-9-7-17)

DEKRA Certified

ISO9001 Quality Management System

www.keysight.com/go/quality

Keysight Technologies, Inc.

DEKRA Certified ISO 9001:2015

Quality Management System

www.keysight.com/find/powermeters

Evolving Since 1939

Our unique combination of hardware, software, services, and people can help you

reach your next breakthrough. We are unlocking the future of technology.

From Hewlett-Packard to Agilent to Keysight.

myKeysight

www.keysight.com/find/mykeysight

A personalized view into the information most relevant to you.

http://www.keysight.com/find/emt_product_registration

find warranty information.

Keysight Services

www.keysight.com/find/service

Keysight Services can help from acquisition to renewal across your

instrument’s lifecycle. Our comprehensive service offerings—one-

stop calibration, repair, asset management, technology refresh,

consulting, training and more—helps you improve product quality

and lower costs.

Keysight Assurance Plans

www.keysight.com/find/AssurancePlans

Up to ten years of protection and no budgetary surprises to ensure

your instruments are operating to specification, so you can rely on

accurate measurements.

Keysight Channel Partners

www.keysight.com/find/channelpartners

Get the best of both worlds: Keysight’s measurement expertise and

product breadth, combined with channel partner convenience.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Keysight Technologies Instrument de mesure

Keysight Technologies

Keysight Technologies M9391A PXIe Manuel utilisateur

Keysight Technologies

Keysight Technologies 34136A Manuel utilisateur

Keysight Technologies

Keysight Technologies U2000 Series Manuel utilisateur

Keysight Technologies

Keysight Technologies X Series Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies 34972A Manuel utilisateur

Keysight Technologies

Keysight Technologies X Series Manuel utilisateur

Keysight Technologies

Keysight Technologies UXA Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N2750A Manuel utilisateur

Keysight Technologies

Keysight Technologies N9030B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies B1505A Manuel utilisateur

Keysight Technologies

Keysight Technologies E5061B Manuel utilisateur

Keysight Technologies

Keysight Technologies N9041B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies M8131A Manuel utilisateur

Keysight Technologies

Keysight Technologies M9370A Manuel utilisateur

Keysight Technologies

Keysight Technologies MY53280000 Guide de démarrage rapide

Keysight Technologies

Keysight Technologies N5221A Manuel utilisateur

Keysight Technologies

Keysight Technologies EXA N9010B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N9000A Manuel utilisateur

Keysight Technologies

Keysight Technologies B2901A Manuel utilisateur

Keysight Technologies

Keysight Technologies N9322C Manuel utilisateur

Keysight Technologies

Keysight Technologies N6705C Manuel de service

Keysight Technologies

Keysight Technologies E8740A Manuel d'utilisation

Keysight Technologies

Keysight Technologies N5252A Manuel utilisateur

Keysight Technologies

Keysight Technologies 16197A Manuel d'utilisation

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur