KanexPro EXT-HDBTKVM100 Manuel utilisateur

EXT-HDBTKVM100

4K HDBaseT 2.0™ Extender w/ HDMI® & USB 2.0

KVM support

Extend HDMI, USB 2.0, and RS-232 & Power over HDBaseT

up to 150 meters (492 feet)

Version: EXT-HDBTKVM100_2016V1.0

HDBaseT 2.0 KVM Extender Set

Preface

Read this user manual carefully before using this product. Pictures shown in this manual

is for reference only, different model and specifications are subject to real product.

This manual is only for operation instruction only, not for any maintenance usage. The

functions described in this version are updated till February 2016. Any changes of

functions and parameters since then will be informed separately. Please refer to the

dealers for the latest details.

All product function is valid till 2-26-2016.

Trademarks

Product model and logo are trademarks. Any other trademarks mentioned in this

manual are acknowledged as the properties of the trademark owner. No part of this

publication may be copied or reproduced without prior written consent.

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. It has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a commercial

installation.

Operation of this equipment in a residential area is likely to cause interference, in which

case the user at their own expense will be required to take whatever measures may be

necessary to correct the interference

Any changes or modifications not expressly approved by the manufacture would void

the user’s authority to operate the equipment.

HDBaseT 2.0 KVM Extender Set

SAFETY PRECAUTIONS

To insure the best from the product, please read all instructions carefully before using

the device. Save this manual for further reference.

!Unpack the equipment carefully and save the original box and packing material for

possible future shipment

!Follow basic safety precautions to reduce the risk of fire, electrical shock and injury

to persons.

!Do not dismantle the housing or modify the module. It may result in electrical shock

or burn.

!Using supplies or parts not meeting the products’ specifications may cause damage,

deterioration or malfunction.

!Refer all servicing to qualified service personnel.

!To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this

product near water.

!Do not put any heavy items on the extension cable in case of extrusion.

!Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

!Install the device in a place with fine ventilation to avoid damage caused by

overheat.

!Keep the module away from liquids.

!Spillage into the housing may result in fire, electrical shock, or equipment damage. If

an object or liquid falls or spills on to the housing, unplug the module immediately.

!Do not twist or pull by force ends of the optical cable. It can cause malfunction.

!Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning.

!Unplug the power cord when left unused for a long period of time.

!Information on disposal for scrapped devices: do not burn or mix with general

household waste, please treat them as normal electrical wastes.

HDBaseT 2.0 KVM Extender Set

Contents

1. Introduction..................................................................................................................1!

1.1 Introduction to EXT-HDBTKVM100....................................................................1!

1.2 Features .............................................................................................................1!

1.3 Packing List........................................................................................................1!

2. Panel Description ........................................................................................................1!

2.1 Transmitter (EXT-HDBTKVM100T)....................................................................1!

2.2 Receiver (EXT-HDBTKVM100R) .......................................................................2!

3. System Connection .....................................................................................................4!

3.1 Usage Precautions.............................................................................................4!

3.2 System Diagram.................................................................................................4!

3.3 Connection Procedure .......................................................................................4!

3.4 PoH Solution ......................................................................................................5!

3.5 Application..........................................................................................................6!

4. Specification ................................................................................................................7!

4.1 Supported Resolution.........................................................................................8!

5. Panel Drawing .............................................................................................................9!

6. Troubleshooting & Maintenance................................................................................10!

7. After-sales Service ....................................................................................................11!

HDBaseT 2.0 KVM Extender Set

1. Introduction

1.1 Introduction to EXT-HDBTKVM100

Compliant with HDMI 2.0 & HDCP 2.2, The KanexPro EXT-HDBTKVM100 is a 4K

HDMI Extender set developed with the latest HDBaseT™ 2.0 technology to extend

uncompressed HDMI video, audio, USB 2.0, control signals and PoH over a single

CAT5e/6 cable. The PoH compliant extender comes with only one power supply, which

means that, it can be powered bi-directionally from Tx to Rx or vice versa to save

installers time and added cost to installing a power outlet. Ideally designed for smart

displays and KVM solutions fitting digital signage markets.

Features

!Compatible with HDMI2.0, delivers high-resolution AV signal (1080p 3D,

4Kx2K@60Hz), support older compatibility (e.g. HDMI 1.4)

!Supports HDBaseT 2.0, transmit 4Kx2K signal up to 100m and 1080p signal up to

150m over single CAT5e/CAT6 cable

!EDID Pass-Thru

!HDCP2.2 compliant

!Supports CEC

!Front panel status LEDs for power, link & HDCP

!Transmission mode (100m/150m) can be switched via intuitive front panel switcher

!Bi-directional USB & RS232 control

!Bi-directional PoH (Power over HDBaseT)

1.2 Packing List

"1 x Transmitter (EXT-HDBTKVM100T)

"1 x Receiver (EXT-HDBTKVM100R)

"4 x Detachable Mounting Ears

"8 x Screws

"1 x Power Adapter (DC 12V 2A)

"8 x Plastic Cushions

"2 x RS232 cables (Phoenix to 9 Pin

D-Sub)

"1 x User manual

#Please confirm if the product and the accessories are all included, if not, please

contact your dealer or [email protected]

HDBaseT 2.0 KVM Extender Set

2. Panel Description

2.1 Transmitter (EXT-HDBTKVM100T)

No.

Name

Description

①

Indicators

Power:

"OFF: No power

"RED: DC power present

ON: Working status indicator

"OFF: Not operational

"Blinking GREEN: Normal operation

LINK: HDBT Link status indicator

"OFF: No Link

"GREEN: Link successful

"Blinking GREEN: Link problem

HDCP: HDCP compliant indicator

$OFF: No HDMI traffic (no picture)

$GREEN: Traffic with HDCP

$Blinking GREEN: Traffic without HDCP

②

Transmission

Mode Switcher

Activate 100m/ 150m-transmission mode.

"100m mode: 4Kx2K@60Hz and 1080p signals can be

transmitted up to 100m

"150m modes: 1080p signal can be transmitted up to 150m,

but will not support 4K signals.

Note: After setting switch position, the mode will not take effect

until units are restarted. Please set both ends identical.

③

Micro USB port, used for firmware update.

Firmware update needs auxiliary equipment, please contact

DC 12V

Tx Rx

RS232HDBT OUTHDMI IN USB OUT

FW100m / 150m

MODEON LINK HDCP

45678

2 3

Front

Rear

HDBaseT 2.0 KVM Extender Set

with our after-sales department for more details.

④

HDMI IN

Connect with HDMI source

⑤

HDBT OUT

Connect to the HDBT IN port on rear panel of the Receiver via

CAT5e/ CAT6a cable, compliant with HDBT2.0 and support

bi-directional PoH.

⑥

USB OUT

Type-B USB port, connect to PC to receive remote USB control

⑦

RS232

Serial port, connects with control device or device to be

controlled, supports bi-directional RS232 control.

⑧

DC 12V

Connect with a DC12V 2A power adapter.

#Pictures for reference only, subject to our existing products.

2.2 Receiver (EXT-HDBTKVM100R)

No.

Name

Description

①

Indicators

Power:

"OFF: No power

"RED: DC power present

ON: Working status indicator

"OFF: Not operational

"Blinking GREEN: Normal operation

LINK: HDBT Link status indicator

"OFF: No Link

"GREEN: Link successful

"Blinking GREEN: Link problem

HDCP: HDCP compliant indicator

$OFF: No HDMI traffic (no picture)

FW10 0 m / 150m

MODEON LINK HDCP

DC 12V

Tx Rx

HDBT IN

HDMI OUT USB IN RS232

45678

2 3

Front

Rear

HDBaseT 2.0 KVM Extender Set

$GREEN: Traffic with HDCP

$Blinking GREEN: Traffic without HDCP

②

Transmission

Mode Switcher

Activate 100m/ 150m-transmission mode.

"100m mode: 4Kx2K@60Hz and 1080P signals can be

transmitted up to 100m

"150m modes: 1080P signal can be transmitted up to 150m,

but do not support 4K signals.

Note: After setting switch position, the mode will not take effect

until units are restarted. Please set both ends identical.

③

Micro USB port, used for firmware update.

Firmware update needs auxiliary equipment, please contact

with our after-sales department for more details.

④

HDMI OUT

Connect with HDMI display

⑤

HDBT IN

Connect to the HDBT OUT port on the Transmitter via CAT5e/

CAT6a cable, compliant with HDBT2.0 and support

bi-directional PoH

⑥

USB IN

Type-A USB port, connect to mouse/ keyboard/ U-disk for

remote USB access

⑦

RS232

Serial port, connects with control device or device to be

controlled, supports bi-directional RS232 control

⑧

DC 12V

Connect with a DC12V 2A power adapter.

#Pictures for reference only, subject to our existing products.

HDBaseT 2.0 KVM Extender Set

3. System Connection

3.1 Usage Precautions

1) System should be installed in a clean environment and should have optimal

temperature and humidity.

2) All the power switches, plugs, sockets and power cords should be insulated for

reliable transmission and safety.

3) All devices should be connected before powering on.

3.2 System Diagram

3.3 Connection Procedure

Step1. Connect HDMI source (such as Blu-ray or PC) to HDMI INport of the transmitter

with an HDMI cable.

Step2. Connect HDBT OUT port of the transmitter to HDBT IN port of the receiver

through a straight-thru CAT5e/CAT6 cable.

Step3. Connect a HDMI display (such as HDTV) to HDMI OUT port of the receiver with

HDMI cable;

Step4. When using the USB control, do the following:

a) Connect PC to the USB OUT port of transmitter.

b) Connect Mouse/ Keyboard to the USB IN port(s) port of receiver.

Step5. When using the bi-directional RS232 control, do the following:

c) Connect PC to the RS232 port at either the transmitter or the receiver.

d) Connect a third-party device (such as projector) need to be controlled to the

RS232 port at the other end.

Keyboard

Mouse

HDTV

DC 12V

USB Signal:

RS232 Signal:

Transmitter

Receiver

Projector

BluerayDVD

Laptop

HDBaseT 2.0 KVM Extender Set

e) Send RS232 commands to control the third-party device. For more details

about RS232 commands, please refer to the user manual for the third-party

device.

Step6. Connect with DC12V power adaptor to the power port of either Transmitter or

Receiver; the other end will be powered synchronously via PoH.

1) System Diagram shown in this manual is for reference only, more specific

schemes depend on real-time applications.

2) Connect HDBT ports via straight-thru CAT5e/6 cable with TIA/EIAT568B standard

terminations at both ends.

3) RS232 communication protocol: Baud Rate: 9600; data bit: 8; stop bit: 1; parity:

none. HDBT Transceiver receives RS232 control from devices with various baud

rate (2400, 4800, 9600, 19200, 38400, 57600, 115200).

4) HDBT ports can work with existing KanexPro HDBT products that have same

power supply solution.

5) Make sure the switchers on front panel are in the necessary status.

6) Reboot the device if the switcher status has changed.

3.4 PoH (Power over HDBaseT)

HDBaseT Transceiver boasts HDBT port, which supports PoH. Besides carrying

uncompressed 1080p or 4K video signals, USB or RS-232 control signals over a single

Cat 5e/Cat 6 cable, it transfers DC power over a single Ethernet cable to a distance up

to 100 meters (m) bi-directionally.

Connect the DC adapter to either the transmitter or the receiver; the other end can be

powered synchronously (see in the following figure):

DC 12V

Transmitter

Receiver

PoH

Table des matières

Autres manuels KanexPro Extenseur

KanexPro

KanexPro EXT-HDBT70C Manuel utilisateur

KanexPro

KanexPro EXT-USB2100M Manuel utilisateur

KanexPro

KanexPro MPTP-T70S-H2 Manuel utilisateur

KanexPro

KanexPro HDBASE100ME Manuel utilisateur

KanexPro

KanexPro EXT-HDBT150M Manuel utilisateur

KanexPro

KanexPro EXT-100SL18G Manuel utilisateur

KanexPro

KanexPro HDBASE70POE Manuel utilisateur

KanexPro

KanexPro EXT-NETAVTX Manuel utilisateur

KanexPro

KanexPro EXT-HDMIKVM70M Manuel utilisateur

KanexPro

KanexPro WP-EDUKIT4K Manuel utilisateur

KanexPro

KanexPro EXT-HDBASE70E Manuel utilisateur

KanexPro

KanexPro EXT-18GHDMIWL Manuel utilisateur

KanexPro

KanexPro EXT-50M18G Manuel utilisateur

KanexPro

KanexPro EXT-4KFIBERPRO Manuel utilisateur

KanexPro

KanexPro EXT-HDBASE70E Manuel utilisateur

KanexPro

KanexPro EXT-70SL18G Manuel utilisateur

KanexPro

KanexPro HDBASE70POE Manuel utilisateur

KanexPro

KanexPro WP-2X1HDUSBC Manuel utilisateur

KanexPro

KanexPro VGAEXTX8 Manuel utilisateur

KanexPro

KanexPro HDEXT50M Manuel utilisateur

KanexPro

KanexPro HDEXT50M Manuel utilisateur

KanexPro

KanexPro VGAEXTX1 Manuel utilisateur

KanexPro

KanexPro EXT-HD60M Manuel utilisateur

KanexPro

KanexPro EXT-HDBT70M Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur