KanexPro EXT-HDBASE70E Manuel utilisateur

EXT-HDBASE70E

4K Compliant HDBaseT™ 230 feet - HDMI® Extender

Version: EXT- HDBASE70E_2014V1.0

4K Compliant HDBaseT™ Extender

Preface

Read this user manual carefully before using this product. Pictures shown in this manual

is for reference only, different model and specifications are subject to real product.

This manual is only for operation instruction only, not for any maintenance usage. The

functions described in this version are updated till December 2014. Any changes of

functions and parameters since then will be informed separately. Please refer to the

dealers for the latest details.

All product function is valid till 2014-12-23.

Trademarks

Product model and logo are trademarks. Any other trademarks mentioned in this

manual are acknowledged as the properties of the trademark owner. No part of this

publication may be copied or reproduced without prior written consent.

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. It has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a commercial

installation.

Operation of this equipment in a residential area is likely to cause interference, in which

case the user at their own expense will be required to take whatever measures may be

necessary to correct the interference

Any changes or modifications not expressly approved by the manufacture would void

the user’s authority to operate the equipment.

4K Compliant HDBaseT™ Extender

SAFETY PRECAUTIONS

To insure the best from the product, please read all instructions carefully before using

the device. Save this manual for further reference.

!Unpack the equipment carefully and save the original box and packing material for

possible future shipment

!Follow basic safety precautions to reduce the risk of fire, electrical shock and injury

to persons.

!Do not dismantle the housing or modify the module. It may result in electrical shock

or burn.

!Using supplies or parts not meeting the products’ specifications may cause damage,

deterioration or malfunction.

!Refer all servicing to qualified service personnel.

!To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this

product near water.

!Do not put any heavy items on the extension cable in case of extrusion.

!Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

!Install the device in a place with fine ventilation to avoid damage caused by

overheat.

!Keep the module away from liquids.

!Spillage into the housing may result in fire, electrical shock, or equipment damage. If

an object or liquid falls or spills on to the housing, unplug the module immediately.

!Do not twist or pull by force ends of the optical cable. It can cause malfunction.

!Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning.

!Unplug the power cord when left unused for a long period of time.

!Information on disposal for scrapped devices: do not burn or mix with general

household waste, please treat them as normal electrical wastes.

4K Compliant HDBaseT™ Extender

Contents

1. Introduction..................................................................................................................1!

1.1 Introduction to HDBaseT Extender Set ..............................................................1!

1.2 Features .............................................................................................................1!

1.3 Package List.......................................................................................................2!

2. Introduction of Product Appearance ............................................................................3!

2.1 Appearance of HDBaseT Transmitter ................................................................3!

2.2 Appearance of HDBaseT Receiver ....................................................................4!

3. System Connection .....................................................................................................5!

3.1 Usage Precautions.............................................................................................5!

3.2 System Diagram.................................................................................................5!

3.3 Connection Procedure .......................................................................................5!

3.4 Application..........................................................................................................6!

3.5 Twisted Pair Cable Connection..........................................................................6!

4. Specification ................................................................................................................7!

4.1 Supported Resolution.........................................................................................8!

5. Panel Drawing .............................................................................................................9!

6. Troubleshooting & Maintenance................................................................................10!

7. After-sales Service ....................................................................................................11!

4K Compliant HDBaseT™ Extender

1. Introduction

1.1 Introduction to HDBaseT Extender Set

The KanexPro HDBASE70E is a 4K compliant Transmitter-Receiver set made to extend

Ultra HD 4K, digital audio, wide-band IR and power over Ethernet (PoE) over a cost

effective cat6 cable. Supports computer resolutions up to 1920x1200, HD1080P/60 with

Deep Color. This HDCP compliant extender routes distances up to 230 feet using

HDBaseT™ Lite technology. Ideal for digital signage applications or routing

uncompressed HDMI A/V signals over inexpensive CAT6 in boardrooms, conference

rooms and classrooms for far-end projectors. The power from Tx is supplied to Rx

requiring no power on the receiver, since PoE is supported; therefore only one power

supply is needed.

Note: We recommend using a metal STP connector for RJ-45. The shielded layer of

cable must be connected to the connector’s metal shell for zero EMI noise and excellent

transmission

1.2 Features

!Supports full HD: Delivers high-resolution image (1080p 3D, 4Kx2K)

!Maximum transmission distance is 230 ft. (70 m) for 1080p and 131 ft. (40m) for

4Kx2K over single CAT5e/CAT6 cable

!High Bandwidth: 10.2Gps.

!HDTV Compatible, use HDMI 1.4 and HDCP compliant.

!Supports PoE & CEC.

!Uses HDBaseT technology for extended capability and reliability

!Bi-directional IR control

!LED indicators show work status.

Note: Please use a CAT5e cable with low impedance (Shielded twisted pair will be

better and should be well grounded)for good transmission effect.

4K Compliant HDBaseT™ Extender

1.3 Package List

"1 x HDBaseT Extender Set (including TX and RX)

"4 x detachable mounting ears

"4 x screws

"8 x plastic cushions

"1 x power adapter (DC 12V 1A)

"1 x user manual

Notes:Please confirm if the product and the accessories are all included, if not, please

contact with the dealers.

4K Compliant HDBaseT™ Extender

2. Introduction of Product Appearance

2.1 Appearance of HDBaseT Transmitter

1) HDMI IN: Connect to HDMI source.

2) IR IN: Connect to an IR receiver, the IR signal received from this port can only

send out via HDBaseT Receiver.

3) IR OUT: Connect with IR emitter; HDBaseT Receiver receives the sent IR signals.

4) DC 12V: Connect with power supply, energize both TX and RX (PoE solution)

synchronously.

5) TP OUT: Connect to the TP IN socket on the HDBaseT Receiver via CAT5e/ CAT6

cable.

4K Compliant HDBaseT™ Extender

2.2 Appearance of HDBaseT Receiver

1) HDMI Out: Connect to HDMI display.

2) IR IN: Connect to an IR receiver, the IR signal received from this port can only

send out via HDBaseT Transmitter.

3) IR OUT: Connect with IR emitter; HDBaseT Transmitter receives the sent IR

signals.

4) TP IN: Connect to the HDBaseT port on the HDBaseT Transmitter via CAT5e/

CAT6 cable.

Note: HDBaseT Extender Set boasts 2 indicators to show real-time operation

information:

Indicator

Function

Details

Green

Show input signal

connection

Connected:

HDCP Compliant: Illuminate;

Not HDCP Compliant: Blink.

Disconnected: Off

Yellow

Indicate linking status of

the transmitter and the

receiver

Connected: Illuminate

Disconnected: Off

4K Compliant HDBaseT™ Extender

3. System Connection

3.1 Usage Precautions

1) System should be installed in a clean environment and has a prop temperature and

humidity.

2) All of the power switches, plugs, sockets and power cords should be insulated and

safety.

3) All devices should be connected before power on.

4) The Cat5e/Cat6 terminations for HDBaseT devices should be a straight-thru TIA/EIA

T568B standard.

3.2 System Diagram

3.3 Connection Procedure

Step1. Connect HDMI source (such as Blue-ray DVD) to HDMI Inport of the transmitter

with an HDMI cable.

Step2. Connect TP OUT port of the transmitter to TP IN port of the receiver through a

CAT5e/CAT6 cable.

Step3. Connect a HDMI displayer (such as HDTV) to HDMI Out port of the receiver with

HDMI cable.

Step4. When using the bi-directional IR control, do the following.

a) Connect the IR emitter at either end to the IR OUT port on either the

transmitter or the receiver.

b) When using a powered IR receiver, connect via a 3.5 mm stereo plug to the

IR IN on either the receiver or the transmitter.

Step5. Connect with DC 12V power adaptor to the power port of HDBaseT Transmitter;

HDBaseT Receiver will be empowered synchronously with PoE solution.

HDTV

DVD

IR Remote

CAT5e/CAT6

4K Compliant HDBaseT™ Extender

3.4 Application

The EXT-HDBASE70E Set has a good application in various occasions, such as

computer realm, monitoring, big screen displaying, meeting room, education and bank &

securities institution etc.

3.5 Twisted Pair Cable Connection

The Cat5e/Cat6 terminations for HDBaseT devices should be a straight thru

TIA/EIAT568B standard. TIA/EIA T568A standard is NOT recommended.

Note: To make the best out of HDMI transmission, cable connectors MUST be metallic;

the shielded layer of cable MUST be connected to the connector’s metal shell.

TIA/EIA T568A

TIA/EIA T568B

Cable color

Green white

Orange

white

Green

Orange

white

Green white

Blue

Blue white

Orange

Green

Brown white

Brown

1st

Ground

4--5

1st

Ground

4--5

2nd

Ground

3--6

2nd

Ground

1--2

3rd

Group

1--2

3rd

Group

3--6

4th

Group

7--8

4th

Group

7--8

Autres manuels pour EXT-HDBASE70E

Table des matières

Autres manuels KanexPro Extenseur

KanexPro

KanexPro HDBASE70POE Manuel utilisateur

KanexPro

KanexPro EXT-HDBT150M Manuel utilisateur

KanexPro

KanexPro HDEXT50M Manuel utilisateur

KanexPro

KanexPro EXT-4KFIBERPRO Manuel utilisateur

KanexPro

KanexPro EXT-70SL18G Manuel utilisateur

KanexPro

KanexPro WP-2X1HDUSBC Manuel utilisateur

KanexPro

KanexPro EXT-100SL18G Manuel utilisateur

KanexPro

KanexPro EXT-HDBT70C Manuel utilisateur

KanexPro

KanexPro HDBASE100ME Manuel utilisateur

KanexPro

KanexPro EXT-HDMIKVM70M Manuel utilisateur

KanexPro

KanexPro MPTP-T70S-H2 Manuel utilisateur

KanexPro

KanexPro EXT-50M18G Manuel utilisateur

KanexPro

KanexPro EXT-HDBT70M Manuel utilisateur

KanexPro

KanexPro EXT-NETAVTX Manuel utilisateur

KanexPro

KanexPro VGAEXTX1 Manuel utilisateur

KanexPro

KanexPro VGAEXTX2 Manuel utilisateur

KanexPro

KanexPro HDBASE70POE Manuel utilisateur

KanexPro

KanexPro HDBase100M Manuel utilisateur

KanexPro

KanexPro VGAEXTX8 Manuel utilisateur

KanexPro

KanexPro HDBASE100POEL Manuel utilisateur

KanexPro

KanexPro EXT-HDBASE70E Manuel utilisateur

KanexPro

KanexPro EXT-HDBTKVM100 Manuel utilisateur

KanexPro

KanexPro WP-EDUKIT4K Manuel utilisateur

KanexPro

KanexPro EXT-18GHDMIWL Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur