Kamstrup MULTICAL 62 Manuel utilisateur

Installation and User Guide

MULTICAL® 62

Water meter

2 Kamstrup A/S • 55121068_B3_GB_03.2015

MULTICAL® 62 • Water meter

Contents

1 Generl informtion 2

1.1 Permissible operting conditions /

mesuring rnge 3

2 Instlltion 3

2.1 Mounting the ﬂow sensor 4

2.2 Instlltion ngle for ULTRAFLOW® 24 4

2.3 Mounting of clcultor 5

3 Power supply 6

3.1 Bttery supply 6

3.2 Supply modules 6

4 Testing the function 7

5 Plug-in modules 7

5.1 Bse modules 7

5.2 Top modules 11

6 Retroﬁtting modules 13

7 Informtion Codes “INFO” 15

7.1 Trnsport mode 15

8 Troubleshooting 16

9 Setup vi front keys 17

1 Generl informtion

Red this guide before instlling the meter.

In cse of incorrect mounting Kmstrup’s gurntee obligtions no longer pply.

MULTICAL® 62 is  cold wter meter (0.1...50 °C) or (0.1...30 °C) nd  hot wter meter (0.1...90 °C)

consisting of  ﬂow sensor nd  clcultor. The ﬂow sensor electronics re plced in the clcul-

tor’s connecting bse, wheres the clcultor top is  disply unit. The ﬂow sensor is connected to

the clcultor by mens of 2.5 m screened cble.

According to OIML R 49 MULTICAL® 62 is de-

scribed s  “complete meter”. In prctice this

mens tht ﬂow sensor nd clcultor MUST

not be seprted. If ﬂow sensor nd clcultor

hve been seprted nd the sels hve thus

been broken, the wter meter is no longer vlid

for billing purposes. Furthermore, the fctory

gurntee no longer pplies.

Clcultor

Flowprt

3Kamstrup A/S • 55121068_B3_GB_03.2015

MULTICAL® 62 • Water meter

The ccumulted wter consumption to be used for billing purposes is displyed in m3(cubic

metres).

Vrious communiction modules nd power supplies cn be dded. The utility cn replce com-

muniction module nd bttery.

If  longer distnce (up to 10 m) is required between ﬂow sensor nd disply unit,

Pulse Trnsmitter (type number 66-99-618) cn be used.

See instructions 5512-587 for further informtion.

Smller cold wter meters 1.6 to 10 m3/h (except for G¾Bx110 nd G1Bx110) cn be ﬁtted with 

striner (ﬁlter) nd/or nonreturn vlve (bckﬂow preventer). The enclosed specil polyethylene

gskets must be used.

Striner, nonreturn vlve nd specil gskets must only be used in cold wter meters.

1.1 Permissible operting conditions / mesuring rnge

Temperture of medium in ﬂow sensor: Cold wter meter: 0.1...50 °C

Hot wter meter: 0.1...90 °C

Pressure stge: Threded meters PN16

Flnge meters PN25

Mechnicl environment: M1 (MID). Fixed instlltion with minimum vibr-

tion.

Electromgnetic environment: E1 (MID). Housing nd light industry.

The meter’s control cble must be drwn t

min. 25 cm distnce from other instlltions.

Climtic environment: 5 °C...55 °C.

Must be instlled indoors nd in environments

with non-condensing humidity.

MID = Mesuring Instrument Directive 2004/22/EC.

2 Instlltion

In order to prevent cvittion the bck pressure in the ﬂow sensor must be minimum 1.5 br t Q3

nd minimum 2.5 br t Q4(resizes of Q3nd Q4, see lbel on ﬂow sensor).

The meter must not be exposed to lower pressure thn the mbient pressure (vcuum).

Pressure stges re PN16 for threded meters nd PN25 for ﬂnge meters, see mrking. Flow

sensor mrking does not cover included ccessories.

Stright inlets or outlets re not required in order to comply with MID. A stright inlet section will

only be necessry in cse of hevy ﬂow disturbnces before the meter.

4 Kamstrup A/S • 55121068_B3_GB_03.2015

MULTICAL® 62 • Water meter

2.1 Mounting the ﬂow sensor

Prior to the instlltion of the ﬂow sensor the system ought to be ﬂushed,  ﬁtting piece replcing

the meter.

Remove dhesive wfers/ protection membrnes from the meter’s inlet nd outlet nd mount the

ﬂow sensor.

You must lwys use new gskets in originl qulity.

The ﬂow direction is indicted by n rrow on the side of the ﬂow sensor.

Threded meters re mounted by mens of couplings. You must mke sure tht the threded

lengths of the couplings do not prevent proper tightening of seling surfces nd tht PN10 cou-

plings re used (PN16 couplings/gskets cn be used).

Using striner nd/or nonreturn vlve the enclosed thicker PE (polyethylene) gskets must be used

in order to void dmging striner or nonreturn vlve.

Striner, nonreturn vlve nd PE-gskets must only be used in cold wter meters.

PE-Gsket Striner Nonreturn vlve PE-Gsket

FLOW

2.2 Instlltion ngle for ULTRAFLOW® 24

ULTRAFLOW® 24 cn be mounted verticlly,

horizontlly or t n ngle.

5Kamstrup A/S • 55121068_B3_GB_03.2015

MULTICAL® 62 • Water meter

Importnt! ULTRAFLOW® 24 my be turned up-

wrds to mx. 45° nd downwrds

to mx. 90° in reltion to the pipe

xis.

Mx. 45° Mx. 45°

Mx. 90° Mx. 90°

The plstic housing must not point verticlly

upwrds s this my cuse the meter to be

inﬂuenced by ir build-up.

2.3 Mounting of clcultor

If there is risk of condenstion in the clcultor, MULTICAL® 62 must be mounted on  wll. Use

the ﬁtting s  templte to mrk nd drill two 6 mm holes in the wll. If the ﬂow sensor is mounted

with the plstic housing pointing downwrds, the clcultor ought to be mounted using n ngle

ﬁtting (type no. 3026-252, to be ordered seprtely).

The cble must be mounted minimum 25 cm from other electric instlltions. Do not forget to sel

the clcultor.

52 mm

Wll mounted

10190

91 27

45°

Mounted on ﬂow sensor with

ngle ﬁtting 3026-252

At risk of condenstion, socket extender

(65-61-332) cn be used s n lterntive to wll

mounting.

6 Kamstrup A/S • 55121068_B3_GB_03.2015

MULTICAL® 62 • Water meter

3 Power supply

MULTICAL® 62 cn be powered by mens of  built-in lithium bttery or 24 VAC or 230 VAC mins

supplied vi n integrl supply module.

The two cbles from bttery or supply module re mounted in the clcultor’s terminl strip.

The polrity must be correct: red cble to terminl no. 60 (+)

blck cble to terminl no. 61 (-)

3.1 Bttery supply

MULTICAL® 62 is connected to  lithium bttery, D-cell. The bttery is mrked with instlltion yer,

e.g. 2014 s well s production dte.

Kmstrup type number: 66-00-200-100.

Optiml bttery lifetime is obtined by keeping the bttery temperture below 30 °C.

The voltge of  lithium bttery is lmost constnt throughout the lifetime of the bttery (pprox.

3.65 V). Therefore, it is not possible to determine the remining cpcity by mesuring the voltge.

The bttery cnnot nd must not be chrged nd must not be short-circuited!

Used btteries must be hnded in for pproved destruction, e.g. t Kmstrup A/S.

3.2 Supply modules

The modules re protection clss II nd re

connected vi  two-wire cble (without erth)

through the cble bush of the clcultor plced

in the right side of the connecting bse.

Use connecting cble with n outer dimeter

of 5-10 mm nd ensure correct dismntling s

well s correct cble relief.

Mx. permitted fuse: 6A.

Ntionl regultions for electric instlltions

must be observed.

Blck

Red

60 97

24 VAC supply

24 VAC

3.6 V

Blck

Red

60 27

230 VAC supply

230 VAC

3.6 V

24 VAC

A trnsformer must be used, e.g.

type 66-99-403 for 24 VAC supply module.

Note: This module cnnot be supplied by

24 VDC.

230 VAC

For direct mins connection.

7Kamstrup A/S • 55121068_B3_GB_03.2015

MULTICAL® 62 • Water meter

4 Testing the function

Crry out  function control when the meter hs been fully mounted. Press the button on

MULTICAL® 62 nd check tht the displyed vlues for wter ﬂow etc. re credible vlues.

5 Plug-in modules

A number of extr functions cn be dded to MULTICAL® 62 by mens of plug-in modules. The

individul modules re brieﬂy described below.

5.1 Bse modules

5.1.1 Dt + pulse inputs, type 67-00-10

The dt terminls re used for connection of

e.g.  PC. The signl is pssive nd glvniclly

seprted by mens of optocouplers. Conver-

sion into RS232 level requires connection of

dt cble 66-99-106 (D-Sub 9F) or 66-99-098

(USB) with the following connections:

62 Brown (DAT)

63 White (REQ)

64 Green (GND)

The pulse inputs cn be used for connection of

electricity nd wter meters.

Plese note the mximum pulse frequency s

well s correct pulse coding (l/imp. nd Wh/

imp.), which re selected by mens of the FF

nd GG conﬁgurtions.

65 - 66 Input A

67 - 68 Input B

8 Kamstrup A/S • 55121068_B3_GB_03.2015

MULTICAL® 62 • Water meter

5.1.2 M-Bus, type 67-00-20/27/28/29

M-Bus cn be mounted in str, ring or bus

topology. Up to 250 meters cn be connected

depending on the M-Bus Mster’s power supply

nd the totl cble resistnce.

Cble resistnce < 29 Ohm

Cble cpcity < 180 nF

The M-Bus network is connected on terminls

24 nd 25. The polrity is unimportnt.

M-Bus comes with pulse inputs.

5.1.3 Rdio + pulse inputs, type 67-00-21/25/26/29

The rdio module is used for wireless communiction

vi licence-free rdio frequency nd cn be supplied with internl ntenn or with connection for

externl ntenn.

For further informtion on rdio we refer to Technicl description for rdio (5512-012 DK,

5512-013 GB).

The pulse inputs of this module re identicl with the previously described pulse inputs.

Note: Type 67-00-21 includes rdio nd router functions.

The RdioRouter module must be used with mins supply.

5.1.4 Prog. dt logger + RTC + 4…20 mA inputs + pulse inputs, type 67-00-22

The module hs connection possibility for two pressure trnsmitters on terminls 57, 58 nd 59

nd cn be djusted for current reding or pressure rnges of 6, 10 or 16 br.

The module is prepred for remote reding, dt from meter/module being trnsferred to the sys-

tem softwre vi the connected externl GSM/GPRS modem on terminls 62, 63 nd 64.

Furthermore, the module hs two extr pulse inputs, VA nd VB.

The module must be powered by 24 VAC.

5.1.5 Anlog output, type 67-00-23

The module hs two ctive nlog outputs, which cn be individully conﬁgured t 0…20 mA or

4…20 mA. Furthermore, the outputs cn be conﬁgured for  speciﬁc mesuring vlue s well s

the required rnge scling.

All output vlues re updted every 10 seconds.

The module must be mounted in MULTICAL® 62 nd is powered by 24 VAC. Conﬁgurtion to be

crried out vi the “Bse module” menu of METERTOOL.

See installation instructions 5512-369 (DK-GB-DE).

9Kamstrup A/S • 55121068_B3_GB_03.2015

MULTICAL® 62 • Water meter

5.1.6 Lon Works + pulse inputs, type 67-00-24

The LonWorks module is used for dt trnsfer from MULTICAL® 62 either for dt reding/registr-

tion or regultion purposes vi the Lon-Bus.

The module must be powered by 24 VAC.

A list of network vribles (SNVT) nd further detils bout the LonWorks module pper from dt

sheet. Regrding mounting we refer to instlltion instructions 5512-396.

See installation instructions 5512-396 (DK) or 5512-403 (GB).

5.1.7 Wireless M-Bus + 2 pulse inputs, type 67-00-30

The rdio module hs been designed to form prt of the hnd-held Wireless M-Bus Reder sys-

tems of Kmstrup A/S t license-free rdio frequency (868 MHz).

The module fulﬁls the C-mode speciﬁctions of prEN13757-4 nd cn thus form prt of other

systems using Wireless M-Bus C-mode communiction.

The rdio module comes with internl ntenn nd externl ntenn connection s well s two

pulse inputs, which re identicl to the previously described pulse inputs.

The Wireless M-Bus rdio trnsmitter is switched off on disptch from the fctory. It turns on

utomticlly when one liter of wter hs run through the meter. The rdio trnsmitter cn lso be

switched on by mens of  forced dil-up to the meter (keep both front keys pressed for pprox.

5 secs. until CALL is displyed).

5.1.8 ZigBee + 2 pulse inputs, type 67-00-60

The ZigBee module is mounted direct in the meter nd is powered by the meter’s supply. The

module opertes within the 2.4 GHz re nd is ZigBee Smrt Energy certiﬁed. The certiﬁction

secures tht the meter cn form prt of other ZigBee networks, e.g. reding severl meter types

from different meter suppliers.

To be ble to offer  compct solution the module uses n internl ntenn.

5.1.9 Metsys N2 (RS485) + N2 (RS485) + 2 pulse inputs, type 67-00-62

The N2 module is used for dt trnsfer from MULTICAL® wter meters to n N2 Mster in 

Johnson Controls System. The N2 module trnsfers ccumulted volume nd ﬂow to n N2 Mster.

N2 Open from Johnson Controls is  widespred nd estblished ﬁeld bus protocol used within

building utomtion. The N2 module for MULTICAL® 62 ensures simple integrtion from Kmstrup’s

wter meters to N2 Open bsed systems. Address re is 1-255 determined by the lst three digits

of the meters customer number.

5.1.10 SIOX module (Auto detect Bud rte), type 602-00-64

SIOX is used for dt reding of smll nd medium-sized groups of wter meters vi cble, the

dt redings being presented by the min system, e.g. MCom, Fix or Telefrng. Further inform-

tion on these systems cn be ordered from the supplier of these. Furthermore,  conﬁgurtion tool

is vilble from Telefrng.

The two-wire seril SIOX bus connection is optoisolted from the meter nd is connected without

regrd to polrity (i.e. the polrity is unimportnt). The module is powered by the SIOX bus. Commu-

niction speed between 300 nd 19,200 bud. The module utomticlly uses the highest possible

communiction speed. The module converts dt from KMP protocol to SIOX protocol.

10 Kamstrup A/S • 55121068_B3_GB_03.2015

MULTICAL® 62 • Water meter

5.1.11 BACnet MS/TP (B-ASC) RS485 + 2 pulse inputs (VA, VB), type 67-00-66

The BACnet module is used for dt trnsfer from MULTICAL® 62 wter meters into BACnet sys-

tems. The BACnet module trnsfers meter number (progrmmble), seril number, ccumulted

volume ﬂow (V1), ctul ﬂow, ccumulted vlues from dditionl meters with vi puls InA, InB s

well s info codes from the wter meter to the BACnet system. BACnet is  widespred nd estb-

lished ﬁeld bus protocol used within building utomtion. The BACnet module for MULTICAL® 62

ensures simple integrtion from Kmstrup’s wter meters to BACnet bsed systems. The module

cn be used s both mster or slve, depending on the used MAC ddress.

5.1.12 Modbus RS485 RTU* Slve Module with 2 pulse inputs (VA, VB), type 67-00-67

The Modbus bse module for MULTICAL® 62 ensures  simple integrtion from Kmstrup’s wter

meters into Modbus bsed systems.

Modbus is n open, widespred nd well estblished seril communiction protocol used within

building utomtion.

Further detils bout the Modbus MS/TP module pper from dt sheet 5810-1253, GB-version.

5.1.13 GSM/GPRS module (GSM6H), type 602-00-80

The GSM/GPRS module functions s trnsprent communiction pth between reding softwre

nd MULTICAL® 62 nd is used for dt reding. The module includes n externl dul-bnd GSM

ntenn which must be used. The module itself includes  number of light emitting diodes indict-

ing the signl level, which re very useful during instlltion. The GSM/GPRS module must be used

together with high-power mins supply (230 VAC: 602-00-00-3 nd 24 VAC: 602-00-00-4).

5.1.14 3G GSM/GPRS module (GSM8H), type 67-00-81

Like GSM6H this module functions s trnsprent communiction pth between reding softwre

nd MULTICAL® 62 nd is used for dt reding.

However, this module supports both 2G (GSM/GPRS) nd 3G (UMTS) which mkes it pplicble in

res with 3G coverge only.

The module requires n externl Antenn, which covers both 900 MHz, 1800 MHz nd

2100 MHz.

The module itself is ﬁtted with  line of light emitting diodes indicting signl strength which re

very useful during instlltion. Furthermore, it is indicted whether the module is connected to 

2G or  3G network.

Regarding mounting we refer to installation instructions (DK: 5512-1121, GB: 5512-1122,

DE: 5512-1123, FI: 5512-1124, SE: 5512-1125).

*) RTU : Remote Terminl Unit.

Autres manuels pour MULTICAL 62

Table des matières

Autres manuels Kamstrup Instrument de mesure

Kamstrup

Kamstrup ULTRAFLOW 54 DN15-125 Manuel de la liste des pièces

Kamstrup

Kamstrup MULTICAL 803 Manuel utilisateur

Kamstrup

Kamstrup ULTRAFLOW 54 Manuel de la liste des pièces

Kamstrup

Kamstrup 162M Manuel de la liste des pièces

Kamstrup

Kamstrup M-Bus Manuel de la liste des pièces

Kamstrup

Kamstrup MULTICAL 21 Manuel de la liste des pièces

Kamstrup

Kamstrup MAXICAL III Manuel utilisateur

Kamstrup

Kamstrup MULTICAL 603 Manuel utilisateur

Kamstrup

Kamstrup MULTICAL 41 Manuel de la liste des pièces

Kamstrup

Kamstrup MULTICAL 62 Manuel de la liste des pièces

Kamstrup

Kamstrup ULTRAFLOW 54 Manuel utilisateur

Kamstrup

Kamstrup MULTICAL 61 Manuel utilisateur

Kamstrup

Kamstrup MULTICAL 801 Manuel de la liste des pièces

Kamstrup

Kamstrup ULTRAFLOW 54 DN15-125 Manuel de la liste des pièces

Kamstrup

Kamstrup MULTICAL 801 Manuel utilisateur

Kamstrup

Kamstrup MULTICAL 602 Manuel de la liste des pièces

Kamstrup

Kamstrup flowIQ 3100 Instructions d'utilisation et d'installation

Kamstrup

Kamstrup MULTICAL 302 Manuel utilisateur

Kamstrup

Kamstrup 382 Manuel utilisateur

Kamstrup

Kamstrup READy Collector Manuel utilisateur

Kamstrup

Kamstrup OMNIPOWER Manuel utilisateur

Kamstrup

Kamstrup flowIQ 2102 Instructions d'utilisation et d'entretien

Kamstrup

Kamstrup MULTICAL 41 Manuel utilisateur

Kamstrup

Kamstrup MULTICAL 302 Manuel de la liste des pièces

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur