JVC DLA-X95R Manuel utilisateur

D-ILA Home Theater Projector

“Projector Calibration Software 5”

INSTRUCTIONS

About the marks being used in this manual

refers to as explanations/instructions for DLA-X95R and DLA-X75R.

refers to as explanations/instructions for DLA-X900R and DLA-X700R.

refers to as explanations/instructions for DLA-X500R.

Items without markings are for all models.

“Projector Calibration Software” is a tool that enables you to use the projector in an optimal condition at all times with

the use of a commercially available optical sensor.

Calibration Feature

By performing a precise calibration with easy procedures in optimizing the projected images, which changes

depending on the installation conditions, such as installation position of the main unit, lens shift/zooming position,

you can enjoy high-quality images that are suitable for the installation conditions. You can also maintain the projector

in an optional state by correcting distortions, such as those in the color balance, which are caused by the prolonged

use of the projector.

Environment Settings

Adjusts the video settings according to the installation environment to minimize any influence on the image quality

by objects, such as white walls or indirect illumination.

Import/Export Image Quality Adjustment Data

Enables you to save the image setting data to a PC from the projector, or imported from a PC to the projector via the

LAN terminal.

* “Projector Calibration Software” is designed to adjust gamma and color display by changing the settings of the

projector.

* Please note that setting of the projector is changed by using this software.

●Projectors that support calibration

Models supported: DLA-X900R, DLA-X700R, DLA-X500R, DLA-X95R, DLA-X75R

●PC (computer)

●LAN cable

●Optical sensor

Models supported: Spyder4ELITE/PRO by Datacolor

*Spyder4

ELITE and Spyder4PRO are registered trademarks of Datacolor in the United States and other countries.

About “Projector Calibration Software”

Required Equipment

X95R/X75R

X900R/X700R

X500R

JVC_PCS_manual.fm 1 ページ２０１４年７月２９日　火曜日　午後６時５０分

To make use of this software, your hardware and software must meet the following specifications.

*1 This software does not support Windows XP.

*2 When using Windows 8, install .NET Framework 3.5 SP1 or enable the function from the Control Panel. For details

on how to install, refer to the Microsoft website.

Caution

The above requirements do not guarantee that this software will work on your computer.

Macintosh systems are not supported.

* Microsoft Windows, Windows Vista and .NET Framework are registered trademarks of Microsoft Corporation in the

United States and other countries.

* Other company names and product names mentioned are trademarks or registered trademarks of the respective

companies.

1Install the software on your PC (P. 3)

2Connect the main unit and your PC via LAN cable

3Projector and PC Setup (P. 4)

4Start up the software (P. 7)

5Connect the optical sensor

6Adjust the calibration (P. 8)

System Requirement

PC (Computer)

OS supported

Windows 7 (32-bit, 64-bit) (Recommended)

Windows 8 (32-bit, 64-bit)

Windows Vista (32-bit) *1

Memory 256 MB or more (1 GB or more recommended)

HDD 256 MB or more

Required functions .NET Framework 3.0 / 3.5 *2

USB port

LAN port

Operation Procedure for the Calibration Adjustment

JVC_PCS_manual.fm 2 ページ２０１４年７月２９日　火曜日　午後６時５０分

Pre-installation Check

Before starting the installation, ensure that no program is running.

During installation or calibration, set the PC to the administrator mode, and disable the screen mode and energy-

saving mode of the PC.

Do not connect the optical sensor to the PC before installing the driver.

Installing Software

Double-click the download file “JVC_PJ_Calibration5_en_v***.zip” to start installation. Download the file to a directory,

and unzip the file.

The following file is created.

●“JVC_PJ_Calibration5_v***.msi”

Double-click “JVC_PJ_Calibration5_v***.msi” to start installation.

1“Welcome to the Projector Calibration Software Setup Wizard” window appears. Click the [Next] button.

2“Select installation Folder” window appears. You can proceed to the next step with the destination unchanged,

or designate a folder if necessary.

3“Confirm installation” window appears. Click the [Next] button.

4After installation is complete, an “Installation complete” window appears. Click the [Close] button to exit the

wizard. Check to ensure that short-cut icons are automatically created both in the Start menu and on the

Desktop.

Caution

* This software does not run on its own. To run the program, you need to connect the optical sensor to a PC via USB

cable, and the PC to a projector via LAN cable.

Installing the Optical Sensor Driver

Install the software supplied with Spyder4ELITE/PRO,

For details on how to install, refer to the instruction manual that is bundled with the optical sensor unit.

Do not run the Spyder4 software when using this calibration software.

Preparation for the Calibration Adjustment

Installing the Software

JVC_PCS_manual.fm 3 ページ２０１４年７月２９日　火曜日　午後６時５０分

Connecting the Projector to a PC directly

Connect the projector to a PC via LAN cable.

Set “Communication Terminal” under the “Function” tab in the

menu to “LAN”.

Set the TCP/IP for the PC and “Network” of the projector.

●Network Settings of the Projector

Open the “Network” item under the “Function” tab in the menu.

Set “DHCP Client” to “Off”.

Set the “IP Address” of the projector to an address different from that of the

PC.

Example: PC [192 168 0 1 ]

Projector [192 168 0 2 ]

Set “Subnet Mask” and “Default Gateway” of this unit to the same values as

the PC.

Example: Subnet Mask [255 255 255 0 ]

Default Gateway [192 168 0 254 ]

After pressing “Set”, press OK to apply new settings.

* The IP address of the projector is required when you use this application.

* For details on the PC settings, refer to the instruction manual of the PC. Procedures for setting up Windows7 are

described in P. 16.

* If the DHCP server is running on the PC that is directly connected to the projector, set “DHCP Client” to “Off”, and

then press “Set”.

Projector and PC Setup

Laptop, etc.

Connection Cable

(Sold Separately)

Projector

To [LAN] Terminal

MENU BACK

LAN

Back

Operate

Select

Exit

Function

Lamp Reset

Remote Code

Communication Terminal

Off

ECO Mode

Off

High Altitude Mode

Network

Off Timer

Trigger

X95R/X75R

MENU BACK

Back

Operate

Select

Exit

Function

MAC Address :

AA-BB-CC-DD-EE-FF

Default Gateway

Subnet Mask

192.168.0.2

255.255.255.0

192.168.0.254

Set

IP Address

Off

DHCP Client

Network

JVC_PCS_manual.fm 4 ページ２０１４年７月２９日　火曜日　午後６時５０分

Connecting the Projector to a Network

Connect the projector to a network connection device (hub, etc.) via LAN cable.

Set “Communication Terminal” under the “Function” tab in the

menu to “LAN”.

Open the “Network” item under the “Function” tab in the menu.

If you want to use the DHCP server, set “DHCP Client” to “On”, and then press

“Set”. Acquisition of the IP address starts automatically.

If the IP address is designated by the network administrator, set “IP Address”,

“Subnet Mask”, and “Default Gateway” to the designated values.

After pressing “Set”, press OK to apply new settings.

* The IP address of the projector is required when you use this application.

* For details on the PC settings, refer to the instruction manual of the PC.

Procedures for setting up Windows7 are described in P. 16.

* For more details on the network, it is recommended that you refer to network-

related books.

* Settings may vary depending on the network device and control procedure for

the network to be connected.

* For details on the IP address and other settings, including whether the use of a

DHCP server is allowed, consult your network administrator.

Laptop, etc.

Server

Hub

Network

Connection Cable

(Sold Separately)

Projector

To [LAN] Terminal

MENU BACK

LAN

Back

Operate

Select

Exit

Function

Lamp Reset

Remote Code

Communication Terminal

Off

ECO Mode

Off

High Altitude Mode

Network

Off Timer

Trigger

X95R/X75R

MENU BACK

Back

Operate

Select

Exit

Function

MAC Address :

AA-BB-CC-DD-EE-FF

Default Gateway

Subnet Mask

192.168.0.2

255.255.255.0

192.168.0.254

Set

IP Address

DHCP Client

Network

JVC_PCS_manual.fm 5 ページ２０１４年７月２９日　火曜日　午後６時５０分

Precautions Prior to Use of Calibration

•Calibrated result might be different from the factory default data, depending on the operating environment.

•During calibration, set the PC to the administrator mode, and disable the screen mode and energy-saving mode of

the PC.

•After turning on the power of the projector, set to the Picture Mode for performing calibration. Start calibration after

waiting for about 30 minutes.

•Make sure the brightness of the ambient light in the room is the same as that of the operating environment where the

projector is used.

•Do not cast a strong ambient light directly on the screen.

•Set the “ECO Mode” of the projector to “OFF” when the calibration software is

running.

•Do not use the remote control and the operation panel when the calibration

software is running.

•Make sure to input video signals (1080 or 720) when the calibration software is running. Calibration does not work

with 4K input.

•Do not set to the HIDE mode when the calibration software is running.

•The calibration does not work when displaying 3D image.

•Calibration does not work when Color Profile has been set to Off or x.v.Color. Set to other Color Profile before

performing the calibration.

•Calibration does not work when Lens Aperture has been set to “Auto 1” or “Auto 2”. Set the lens aperture to "Manual"

before performing the calibration.

•To set the environment settings by using the calibration software, turn off the environment setting of the projector.

•If an error message is prompted while using the calibration software, close the application and restart the projector.

Wait at least 5 minutes before restarting.

•If the application is ended due to the error message while backup, importing or exporting is in progress, restart the

PC, and perform the operations again.

* Upon saving the data after performing calibration, a backup file will be saved automatically to the folder selected in

“Setting”. All data of the projector set prior to this process will be overwritten.

Calibration Adjustment

MENU BACK

LAN

Back

Operate

Select

Exit

Function

Lamp Reset

Remote Code

Communication Terminal

Off

ECO Mode

Off

High Altitude Mode

Network

Off Timer

Trigger

JVC_PCS_manual.fm 6 ページ２０１４年７月２９日　火曜日　午後６時５０分

Double-click the “Projector Calibration software” icon on the Desktop.

Setting

Use this feature to specify the various settings.

1Click the “Setting” button.

2Specify the various settings.

Network

Function

Display

Backup

* Upon saving the data after performing calibration, a backup file will be saved automatically to the selected

folder.

File name “Serial No._Set Picture mode_Year-Month-Date-Time.cbd”

Note that the factory default data will be saved as “Serial No._init_Year-Month-Date-Time.cbd”. Be careful not to

delete this file.

Recovering Backup Data

1Click the “IMPORT” button.

2Select the backup data file from the folder, and click “Open”.

3The backup data is imported to the projector.

Starting up the Software

IP Address: Enter the IP address for the projector on the

network.

To view the IP address of the projector, refer to the

“Projector and PC Setup” item.

After entering the IP address, click the [Check]

button to check the projector’s connection with

the PC.

Port No.: Leave the value unchanged unless you need to

alter it.

Calibration Type(*1): Select a type of calibration.

Gamma Step:

Quality

Normal

Speed

For setting the accuracy level of gamma

calibration.

33 steps

20 stels (default)

9 steps

Screen Size: Enter a screen size for viewing.

Viewing Distance: Enter a viewing distance.

Language: Select a language.

message: Deselect this checkbox if you do not want to

display descriptions on how to operate the

different features.

File Path: Select the location for storing the backup file.

Serial No.: Enter the projector’s serial no.

Double-Click

(*1) Calibration Type

- Gamma+Color

Calibrate gamma and color.

- Gamma

Calibrate gamma only.

- Color

Calibrate color only

- Log only

Log the current status.

Click

JVC_PCS_manual.fm 7 ページ２０１４年７月２９日　火曜日　午後６時５０分

Corrects the image quality which changes depending on the

installation condition (such as installation position of the main unit,

lens shift/zooming position), and distortions (such as those in the

color balance), which are caused by the prolonged use of the

projector.

1Click the “Calibration” button.

2Connect the optical sensor to the PC.

After connection is established, click the “Spyder4” button.

3With the light receiver of the optical sensor facing the projector,

install the optical sensor between the projector and the screen.

Install the optical sensor at a height according to the center of

the projected image. LED of the optical sensor lights up when its

distance from the projector falls within the detection range.

Prevent light of the PC monitor from reaching the optical sensor

directly.

After installation is complete, click the “>>” (Next) button.

4Double-click the Picture Mode, and select a Picture Mode for

calibration from the pull-down menu.

Double-click an item such as Color Profile, Color Temp, or

Gamma, and select a mode for calibration from the pull-down

menu.

Slide Lens Aperture to make a selection.

After setting is complete, click “START”.

* When Custom1 to 5 is selected for Color

Profile, Color Temp and Gamma cannot be selected.

* The Profile Name being created and saved won’t be displayed

when Custom 1 to 5 is selected, but shown as Custom 1 to 5 instead.

* Click the “<<” button to go back to the previous screen if Picture Mode does not appear. Proceed to this

screen again.

* Filter is set automatically in accordance to the Picture Mode and the Color Profile.

* Set to the actual Picture Mode for image viewing before performing calibration. However, even if other Picture

Mode has been selected, the calibration result is applied when the respective setting for Clear Motion Drive,

Lens Aperture, Lamp Power and Filter is the same.

Calibration Procedure

Click

Click after installing

Light Receiver of the

Optical Sensor

How to Install the Optical

Sensor

With the light receiver of the

optical sensor facing the

projector, as illustrated in the

diagram, adjust its distance

from the projector until the LED

of the optical sensor lights up.

Click after setting

Double-Click

X95R/X75R

JVC_PCS_manual.fm 8 ページ２０１４年７月２９日　火曜日　午後６時５０分

5Calibration in progress

While calibration is in progress, make sure that the surrounding

light does not fluctuate.

Otherwise, it may affect the calibration results.

* Noise may appear on the screen when data writing is in

progress.

6The results for each Calibration Type are displayed.

Ga m m a

Calibration results are shown in a white line.

The state before calibration is performed is shown in a blue line.

The green line represents Gamma 2.2.

* When Custom1 to 5 is selected for Color Profile,

Gamma is displayed as Gamma: Normal.

Color

Calibration results are shown in a white line.

The state before calibration is performed is shown in a blue line.

The pink line indicates the color gamut of Rec. 709.

The chromaticity of each color is indicated using x-y coordinates.

* The Profile Name being created and saved won’t be displayed

when Custom 1 to 5 is selected, but shown as Custom 1 to 5

instead.

Color Temp

The chromaticity of the color temperature for each gray level is

indicated by ●of the respective gray levels.

The red circle indicates the intended chromaticity xy ± 0.01.

* When Custom1 to 5 is selected for Color Profile,

Color Temperature is displayed as 6500K.

7Save the results if these are in order.

Click the “SAVE” button.

After saving is complete, below message is displayed.

Click “OK”

to return to the top menu.

To exit without saving the result, click .

(to return to the top menu.)

Gamma

X95R/X75R

Color

Color Temp

X95R/X75R

Click

JVC_PCS_manual.fm 9 ページ２０１４年７月２９日　火曜日　午後６時５０分

Use this feature to create a color profile that contains the color space,

color temperature, and gamma information.

1Click the “Create” button.

2Create a color profile.

Select a Color Space and a Color Temp setting from the pull-

down menu.

You can also enter a numerical value directly.

After Information is displayed,

follow the instructions to select a Filter Type.

Filter Type selection is not necessary. (Fixed at Normal)

Select a Gamma setting from the pull-down menu.

3Enter a profile name.

(Not more than 10 one-byte ASCII characters. Extension of the

created profile is “prof”.)

Click the “START” button after entering the profile name.

* To apply the color profile data to the projector, import it to the

projector by using the Import feature.

Enter a file name and click “Save”.

You can enter the name of the creator in “Author”.

To exit, click

(to return to the top menu.)

Create a Color Profile.

Click

Information

X95R/X75R X900R/X700R

X500R

Prole Name

Click

JVC_PCS_manual.fm 10 ページ２０１４年７月２９日　火曜日　午後６時５０分

Autres manuels pour DLA-X95R

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels JVC Projecteur

JVC

JVC 0210TTH-SW-VP Manuel utilisateur

JVC

JVC DLA-G15U - D-ila Projector, 1500 Ansi Lumens Manuel utilisateur

JVC

JVC DLA-SH7NLG Manuel utilisateur

JVC

JVC DB-HDR36 Manuel utilisateur

JVC

JVC LX-D700U Manuel utilisateur

JVC

JVC DLA-SH7NL Manuel utilisateur

JVC

JVC DLA-X990R Manuel d'instructions

JVC

JVC DLA-VS2000 Manuel utilisateur

JVC

JVC DLA-G20 Manuel utilisateur

JVC

JVC DLA-RS1X - Reference Series Home Cinema... Manuel utilisateur

JVC

JVC DLA-HD10K Manuel utilisateur

JVC

JVC D-ILA DLA-G11 Guide d'installation

JVC

JVC DLA-HD2KE Manuel utilisateur

JVC

JVC D-ILA DLA-RS46 Manuel utilisateur

JVC

JVC LX-D1000 Manuel utilisateur

JVC

JVC D-ILA DLA-RS40 Instructions de montage

JVC

JVC LX-D700U Manuel utilisateur

JVC

JVC PC007182399-1 Manuel utilisateur

JVC

JVC LX-NZ3 Manuel utilisateur

JVC

JVC DLA-SH4KNL Manuel utilisateur

JVC

JVC Reference DLA-RS57U Manuel utilisateur

JVC

JVC DLA-C15U Manuel utilisateur

JVC

JVC DLA-M15 Manuel utilisateur

JVC

JVC DLA-HD2KU - D-ila Projector Head Guide de l'administrateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur