Juniper EX Series Manuel utilisateur

Autres manuels pour EX Series

15

Ce manuel convient aux modèles suivants

1

Autres manuels Juniper Changer

Juniper

Juniper QFX5130-32CD Instructions d'installation

Juniper

Juniper NFX250 Manuel utilisateur

Juniper

Juniper EX 4200 24F Manuel utilisateur

Juniper

Juniper EX4600 Instructions d'installation

Juniper

Juniper EX2300-C-12P Manuel utilisateur

Juniper

Juniper EX8216 Manuel utilisateur

Juniper

Juniper EX8200 Series Mode d’emploi

Juniper

Juniper EX4200-24T Instructions d'installation

Juniper

Juniper EX2200 Series Instructions d'installation

Juniper

Juniper QFX3600 Manuel de l'opérateur

Juniper

Juniper QFX5200-32C Manuel utilisateur

Juniper

Juniper EX2300-C Instructions d'installation

Juniper

Juniper EX2200 Series Mode d’emploi

Juniper

Juniper QFX10016 Manuel utilisateur

Juniper

Juniper EX2300-C Manuel utilisateur

Juniper

Juniper EX Series Manuel utilisateur

Juniper

Juniper EX Series Manuel utilisateur

Juniper

Juniper QFX5100-48T Manuel utilisateur

Juniper

Juniper EX Series Manuel utilisateur

Juniper

Juniper QFX10002 Instructions d'installation

Juniper

Juniper EX3200 Series Manuel utilisateur

Juniper

Juniper QFX5220 Instructions d'installation

Juniper

Juniper EX2200 Series Manuel utilisateur

Juniper

Juniper EX8200 Series Mode d’emploi

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Removing an EX8208 Switch from a Rack or Cabinet Using a Mechanical Lift

Because of the switch's size and weight, we strongly recommend using a mechanical

lift to remove the switch. For instructions on removing a switch without using a

mechanical lift, see Removing an EX8208 Switch from a Rack or Cabinet Without

Using a Mechanical Lift.

Before you remove the switch using a lift:

■Ensure that the rack or cabinet is stable and secured to the building.

■Ensure that there is enough space to place the removed switch in its new location

and along the path to the new location.

■Read General Safety Guidelines and Warnings for EX Series Switches, with

particular attention to Chassis Lifting Guidelines for EX8200 Switches.

■Ensure that the switch has been safely powered off (see Powering Off an EX8200

Switch) and that you have unplugged (disconnected) the power cords to the

power supplies.

■Ensure that you have disconnected any cables or wires attached to the switch

ports.

CAUTION: When removing more than one switch from a rack or cabinet, remove

the switch in the top of the rack or cabinet first and proceed to remove the rest of

the switches from top to bottom.

Ensure that you have the following parts and tools available to remove the switch:

■A mechanical lift

■A Phillips (+) screwdriver, number 2 or number 3, depending on the size of

your rack mounting screws

To remove the switch using a lift (see Figure 1):

1. Use the appropriate Phillips (+) screwdriver to remove the 24 mounting screws

that attach the chassis front-mounting brackets to the rack or cabinet.

2. Move the lift to the rack and position it so that its platform is centered about 0.5

in. (1.27 cm) below the bottom of the switch chassis and as close to it as possible.

3. Carefully slide the switch from the adjustable mounting brackets attached to the

rack onto the lift.

4. Use the lift to transport the switch to its new location.

Removing an EX8208 Switch from a Rack or Cabinet Using a Mechanical Lift ■1

Figure 1: Removing an EX8208 Switch Chassis Using a Mechanical Lift

Related Topics ■Removing an EX8208 Switch from a Rack or Cabinet Without Using a Mechanical

Lift

Published: 2009-07-15

2■Removing an EX8208 Switch from a Rack or Cabinet Using a Mechanical Lift