Juniper T1600 Manuel utilisateur

Installing the T1600 Mounting Hardware for a Four-Post Rack or Cabinet

To prepare to install the router into a four-post rack or cabinet:

■Install cage nuts, if needed.

■Install the large mounting shelf and the spacer bars on the front rack rail.

■Install the small mounting shelf on the rear rack rail.

■Remove the center-mounting brackets from the chassis.

The mounting brackets and flanges have holes for rack-mounting screws, spaced at

5.25 in. (13.34 cm).

Table 1 specifies the holes in which you insert mounting screws (an Xindicates a

mounting hole location), and cage nuts if needed. The hole distances are relative to

one of the standard “U”divisions on the rack. The bottom of all mounting shelves

is at 0.04 in. (0.02 U) above a “U”division.

Table 1: Four-Post or Cabinet Rack Mounting Hole Locations

Small

Shelf

Spacer

Bars

Large

ShelfDistance Above “U”DivisionHole

19.86 U34.75 in. (88.3 cm)60

16.86 U29.51 in. (74.9 cm)51

13.86 U24.26 in. (61.6 cm)42

10.86 U19.01 in. (48.3 cm)33

7.86 U13.76 in. (34.9 cm)24

4.86 U8.51 in. (21.6 cm)15

3.86 U6.76 in. (17.1 cm)12

2.86 U5.01 in. (12.7 cm)9

1.86 U3.26 in. (8.3 cm)6

0.86 U1.51 in. (3.8 cm)3

0.50 U0.88 in. (2.2 cm)2

Installing the T1600 Mounting Hardware for a Four-Post Rack or Cabinet ■1

To install the mounting shelves and spacer bars:

1. Install cage nuts, if needed, in the mounting holes specified in Table 1:

■On the front rack rails, install cage nuts in the holes specified for the large

shelf and the spacer bars.

■On the rear rack rails, install cage nuts in the holes specified for the small

shelf.

2. On the front of each front rack rail, partially insert a mounting screw into the

lowest hole specified in Table 1 for the large shelf and the spacer bars.

3. Install the large shelf on the front rack rails. Rest the bottom slot of each flange

on a mounting screw.

4. Partially insert a mounting screw into the top hole in each flange of the large

shelf.

5. Tighten all the screws completely.

6. The router is shipped with each spacer bar attached to the rear of each

front-mounting flange. Remove each spacer bar by removing the screws that

fasten the spacer bar to the front-mounting flange.

7. Place one of the spacer bars over a flange of the large shelf. Position the notch

in the rear of the spacer bar so the upper part of the bar is flush with the rack

rail and the lower part is flush with the flange of the shelf (see Figure 1).

8. Insert a mounting screw into each of the nonthreaded holes in the recesses of

the spacer bar to secure the spacer bar. Each hole should have a cage nut behind

it.

9. Repeat Steps 7 and 8 for the other spacer bar.

10. Tighten all the screws completely.

11. On the back of each rear rack rail, partially insert a mounting screw into the

lowest hole specified in Table 1 for the small shelf.

12. Install the small shelf on the back rack rails. Rest the bottom slot of each flange

on a mounting screw. The small shelf installs on the back of the rear rails,

extending toward the center of the rack. The bottom of the small shelf on the

rear rack rails must align with the bottom of the large shelf on the front rack

rails.

13. Partially insert screws into the open holes in the flanges of the small shelf.

14. Tighten all the screws completely.

15. Remove the mounting brackets from the chassis by loosening the screws at the

top and bottom of each bracket.

2■Installing the T1600 Mounting Hardware for a Four-Post Rack or Cabinet

Figure 1: Positioning the Spacer Bar on the Rack

Installing the T1600 Mounting Hardware for a Four-Post Rack or Cabinet ■3

Figure 2: Installing the Mounting Hardware for a Four-Post Rack or Cabinet

Related Topics T1600 Router Description■

■T1600 Router Installation Summary

■T1600 Site Preparation Requirements Checklist

Published: 2009-09-30

4■Installing the T1600 Mounting Hardware for a Four-Post Rack or Cabinet

Autres manuels pour T1600

Table des matières

Autres manuels Juniper Matériel réseau

Juniper

Juniper BTI7800 Series Guide d'installation

Juniper

Juniper NETSCREEN-5XP Manuel utilisateur

Juniper

Juniper G10 CMTS Instructions d'installation

Juniper

Juniper JSA7800 Manuel utilisateur

Juniper

Juniper NetScreen-5GT Wireless Manuel utilisateur

Juniper

Juniper SSR1500 Instructions d'installation

Juniper

Juniper EX4100-F- 24P/T Manuel utilisateur

Juniper

Juniper SRX300 Series Instructions d'installation

Juniper

Juniper WX 15 Manuel utilisateur

Juniper

Juniper MX104 Manuel utilisateur

Juniper

Juniper Day One+ Manuel utilisateur

Juniper

Juniper ACX7100 Manuel utilisateur

Juniper

Juniper NFX150 Instructions d'installation

Juniper

Juniper MX10004 Instructions d'installation

Juniper

Juniper TCX1000 Manuel utilisateur

Juniper

Juniper SRX320 Manuel utilisateur

Juniper

Juniper QFX10016 Manuel utilisateur

Juniper

Juniper MX240 Manuel utilisateur

Juniper

Juniper JSA3800 Instructions d'installation

Juniper

Juniper SSR1500 Manuel utilisateur

Juniper

Juniper SSR1200 Manuel utilisateur

Juniper

Juniper CTP150 Manuel utilisateur

Juniper

Juniper DUAL-PORT T1-E1 GPIMS Manuel utilisateur

Juniper

Juniper SRX5600 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur