Juniper SRX380 Instructions d'installation
SRX380 Services Gateway Hardware Guide
Published
2020-03-31
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in
the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks
are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right
to change, modify, transfer, or otherwise revise this publication without notice.
SRX380 Services Gateway Hardware Guide
Copyright © 2020 Juniper Networks, Inc. All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related
limitations through the year 2038. However, the NTP application is known to have some difficulty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with)
Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement
(“EULA”) posted at https://support.juniper.net/support/eula/. By downloading, installing or using such software, you
agree to the terms and conditions of that EULA.
ii
Table of Contents
About the Documentation | vii
Documentation and Release Notes | vii
Using the Examples in This Manual | vii
Merging a Full Example | viii
Merging a Snippet | ix
Documentation Conventions | ix
Documentation Feedback | xii
Requesting Technical Support | xii
Self-Help Online Tools and Resources | xiii
Creating a Service Request with JTAC | xiii
Overview
1
SRX380 Services Gateway Overview | 15
Overview | 15
SRX380 Services Gateway FRUs | 16
Benefits of the SRX380 Services Gateway | 16
SRX380 Chassis | 17
SRX380 Chassis Overview | 17
SRX380 Front Panel | 17
Chassis Status LEDs | 19
Management Port and Network Port LEDs | 20
SRX380 Back Panel | 21
SRX380 Interface Modules Overview | 22
SRX380 Cooling System | 23
SRX380 Power System | 23
SRX380 Services Gateway Power Supply | 24
AC Power Supply LEDs on SRX380 Services Gateways | 25
Power Specifications for SRX380 Services Gateways | 25
AC Power Cord Specifications for SRX380 | 26
iii
Site Planning, Preparation, and Specifications
2
SRX380 Site Preparation Checklist | 29
SRX380 Site Guidelines and Requirements | 30
General Site Installation Guidelines for the SRX380 Services Gateway | 31
SRX380 Services Gateway Environmental Specifications | 31
SRX380 Services Gateway Electrical Wiring Guidelines | 32
SRX380 Services Gateway Physical Specifications | 33
SRX380 Services Gateway Clearance Requirements for Airflow and Hardware
Maintenance | 33
Rack Requirements | 34
Cabinet Requirements | 35
Initial Installation and Configuration
3
Unpacking and Mounting the SRX380 | 37
Unpacking the SRX380 Services Gateway | 37
Verifying Parts Received with the SRX380 Services Gateway | 38
Mounting the SRX380 Services Gateway in a Rack | 39
Connecting the SRX380 to Power | 42
Required Tools and Parts for Grounding the SRX380 Services Gateway | 42
Connecting the SRX380 Grounding Cable | 42
Connecting the SRX380 Services Gateway to an AC Power Supply | 44
Powering Off the SRX380 Services Gateway | 45
Connecting the SRX380 to External Devices | 47
Connecting an SRX380 to a Network for Out-of-Band Management | 47
Connecting an SRX380 to a Management Console by Using an RJ-45 Connector | 48
Connecting an SRX380 to a Management Console by Using the Mini-USB Type-B Console
Port | 49
Configuring Junos OS on the SRX380 | 50
Configure Root Authentication | 50
Plug and Play | 51
Configure the SRX380 Using J-Web | 52
Configuring the SRX380 Services Gateway Using CLI | 54
iv
Maintaining Components
4
Maintaining SRX380 Components | 60
Routine Maintenance Procedures for the SRX380 Services Gateway | 60
Maintaining the SRX380 Services Gateway Cooling System Components | 60
Maintaining the SRX380 Services Gateway Power Supply | 60
Removing and Installing SRX380 Power System Components | 61
Remove an AC Power Supply on SRX380 Devices | 62
Install an AC Power Supply on SRX380 Devices | 63
Removing and Installing Mini-PIMs | 65
Remove a Mini-Physical Interface Module | 65
Install a Mini-Physical Interface Module | 66
Contacting Customer Support and Returning the Chassis or Components
5
Returning the SRX380 Chassis or Components | 69
Contacting Customer Support | 69
Returning an SRX380 Services Gateway or Component to Juniper Networks | 70
Locating the Chassis Serial Number | 70
Locating the Mini-PIM Serial Number Label | 71
Listing the SRX380 Services Gateway Component Details by Using the CLI | 71
Required Tools and Parts for Packing the SRX Series Services Gateway | 72
Packing the SRX Series Services Gateway for Shipment | 72
Packing SRX Series Services Gateway Components for Shipment | 73
Safety and Compliance Information
6
Definitions of Safety Warning Levels | 76
General Safety Guidelines and Warnings | 79
Restricted Access Warning | 81
Qualified Personnel Warning | 84
Prevention of Electrostatic Discharge Damage | 84
v
Fire Safety Requirements | 86
Fire Suppression | 86
Fire Suppression Equipment | 86
Laser and LED Safety Guidelines and Warnings | 87
General Laser Safety Guidelines | 87
Class 1 Laser Product Warning | 88
Class 1 LED Product Warning | 89
Laser Beam Warning | 90
Radiation from Open Port Apertures Warning | 91
Maintenance and Operational Safety Guidelines and Warnings | 92
Battery Handling Warning | 93
Jewelry Removal Warning | 94
Lightning Activity Warning | 96
Operating Temperature Warning | 97
Product Disposal Warning | 99
Action to Take After an Electrical Accident | 100
General Electrical Safety Guidelines and Warnings | 100
AC Power Electrical Safety Guidelines | 101
SRX380 Services Gateway Agency Approvals | 102
SRX380 Services Gateway EMC Requirements | 104
Canada | 104
European Community | 104
Israel | 104
Japan | 105
United States | 105
BSMI Statement (Taiwan) | 105
vi
About the Documentation
IN THIS SECTION
Documentation and Release Notes | vii
Using the Examples in This Manual | vii
Documentation Conventions | ix
Documentation Feedback | xii
Requesting Technical Support | xii
Use this guide to install hardware and perform initial software configuration, routine maintenance, and
troubleshooting for the SRX380 Services Gateway. After completing the installation and basic configuration
procedures covered in this guide, refer to the Junos OS documentation for information about further
software configuration.
Documentation and Release Notes
To obtain the most current version of all Juniper Networks®technical documentation, see the product
documentation page on the Juniper Networks website at https://www.juniper.net/documentation/.
If the information in the latest release notes differs from the information in the documentation, follow the
product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts.
These books go beyond the technical documentation to explore the nuances of network architecture,
deployment, and administration. The current list can be viewed at https://www.juniper.net/books.
Using the Examples in This Manual
If you want to use the examples in this manual, you can use the load merge or the load merge relative
command. These commands cause the software to merge the incoming configuration into the current
candidate configuration. The example does not become active until you commit the candidate configuration.
vii
If the example configuration contains the top level of the hierarchy (or multiple hierarchies), the example
isafull example. In this case, use the load merge command.
If the example configuration does not start at the top level of the hierarchy, the example is a snippet. In
this case, use the load merge relative command. These procedures are described in the following sections.
Merging a Full Example
To merge a full example, follow these steps:
1. From the HTML or PDF version of the manual, copy a configuration example into a text file, save the
file with a name, and copy the file to a directory on your routing platform.
For example, copy the following configuration to a file and name the file ex-script.conf. Copy the
ex-script.conf file to the /var/tmp directory on your routing platform.
system {
scripts {
commit {
file ex-script.xsl;
}
}
}
interfaces {
fxp0 {
disable;
unit 0 {
family inet {
address 10.0.0.1/24;
}
}
}
}
2. Merge the contents of the file into your routing platform configuration by issuing the load merge
configuration mode command:
[edit]
user@host# load merge /var/tmp/ex-script.conf
load complete
viii
Merging a Snippet
To merge a snippet, follow these steps:
1. From the HTML or PDF version of the manual, copy a configuration snippet into a text file, save the
file with a name, and copy the file to a directory on your routing platform.
For example, copy the following snippet to a file and name the file ex-script-snippet.conf. Copy the
ex-script-snippet.conf file to the /var/tmp directory on your routing platform.
commit {
file ex-script-snippet.xsl; }
2. Move to the hierarchy level that is relevant for this snippet by issuing the following configuration mode
command:
[edit]
user@host# edit system scripts
[edit system scripts]
3. Merge the contents of the file into your routing platform configuration by issuing the load merge
relative configuration mode command:
[edit system scripts]
user@host# load merge relative /var/tmp/ex-script-snippet.conf
load complete
For more information about the load command, see CLI Explorer.
Documentation Conventions
Table 1 on page x defines notice icons used in this guide.
ix
Table 1: Notice Icons
DescriptionMeaningIcon
Indicates important features or instructions.Informational note
Indicates a situation that might result in loss of data or hardware
damage.
Caution
Alerts you to the risk of personal injury or death.Warning
Alerts you to the risk of personal injury from a laser.Laser warning
Indicates helpful information.Tip
Alerts you to a recommended use or implementation.Best practice
Table 2 on page x defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
ExamplesDescriptionConvention
To enter configuration mode, type
the configure command:
user@host> configure
Represents text that you type.Bold text like this
user@host> show chassis alarms
No alarms currently active
Represents output that appears on
the terminal screen.
Fixed-width text like this
•A policy term is a named structure
that defines match conditions and
actions.
•Junos OS CLI User Guide
•RFC 1997, BGP Communities
Attribute
•Introduces or emphasizes important
new terms.
•Identifies guide names.
•Identifies RFC and Internet draft
titles.
Italic text like this
x
Autres manuels pour SRX380
2
Table des matières
Autres manuels Juniper Porte
Juniper
Juniper SRX210HE2 Manuel utilisateur
Juniper
Juniper SRX300 Series Instructions d'installation
Juniper
Juniper SRX220 Instructions d'installation
Juniper
Juniper SRX5400 Instructions d'installation
Juniper
Juniper SRX5600 Instructions d'installation
Juniper
Juniper SRX 1400 SERVICES GATEWAY - Instructions de montage
Juniper
Juniper SRX240 Series Manuel utilisateur
Juniper
Juniper SRX550 Instructions d'installation
Juniper
Juniper SRX110 H2 Instructions d'installation
Juniper
Juniper SRX345 Instructions d'installation
Juniper
Juniper VGW VIRTUAL GATEWAY Manuel utilisateur
Juniper
Juniper SRX 1400 SERVICES GATEWAY - Manuel utilisateur
Juniper
Juniper SRX100 Instructions d'installation
Juniper
Juniper SRX110 Instructions d'installation
Juniper
Juniper SRX 5800 Manuel utilisateur
Juniper
Juniper SRX3400 Instructions d'installation
Juniper
Juniper SSG 500M Series Manuel utilisateur
Juniper
Juniper SRX380 Manuel utilisateur
Juniper
Juniper SRX240 Series Manuel utilisateur
Juniper
Juniper SRX 1400 SERVICES GATEWAY - Instructions d'installation
Manuels Porte populaires d'autres marques
LST
LST M500RFE-AS Manuel utilisateur
Kinnex
Kinnex Media Gateway Manuel utilisateur
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuel utilisateur
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur
Telsey
Telsey CPVA 500 - SIP Manuel utilisateur
