Juniper SRX340 Instructions d'installation

SRX340 Services Gateway Hardware Guide

Published

2020-08-26

Juniper Networks, Inc.

1133 Innovation Way

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in

the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks

are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right

to change, modify, transfer, or otherwise revise this publication without notice.

SRX340 Services Gateway Hardware Guide

The information in this document is current as of the date on the title page.

YEAR 2000 NOTICE

Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related

limitations through the year 2038. However, the NTP application is known to have some difficulty in the year 2036.

END USER LICENSE AGREEMENT

The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with)

Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement

(“EULA”) posted at https://support.juniper.net/support/eula/. By downloading, installing or using such software, you

agree to the terms and conditions of that EULA.

Table of Contents

About the Documentation | viii

Documentation and Release Notes | viii

Using the Examples in This Manual | viii

Merging a Full Example | ix

Merging a Snippet | x

Documentation Conventions | x

Documentation Feedback | xiii

Requesting Technical Support | xiii

Self-Help Online Tools and Resources | xiv

Creating a Service Request with JTAC | xiv

Overview

SRX340 Services Gateway Overview | 16

SRX340 Services Gateway Description | 16

SRX340 Services Gateway Field Replaceable Units Overview | 16

Benefits of the SRX340 Services Gateway | 17

SRX340 Chassis | 17

SRX340 Services Gateway Chassis Overview | 18

SRX340 Services Gateway Front Panel | 18

Management Port LEDs | 21

Network Port LEDs | 21

SRX340 Services Gateway Back Panel | 22

SRX340 Services Gateway Interface Modules Overview | 23

SRX340 Cooling System | 23

SRX340 Power System | 24

Understanding the SRX340 Services Gateway Power Supply | 25

SRX340 Services Gateway Power Specifications and Requirements | 25

SRX340 Services Gateway Supported AC Power Cords | 25

iii

Site Planning, Preparation, and Specifications

Site Preparation Checklist for the SRX340 Services Gateway | 29

SRX340 Site Guidelines and Requirements | 31

General Site Installation Guidelines for the SRX340 Services Gateway | 31

SRX340 Services Gateway Environmental Specifications | 32

SRX340 Services Gateway Electrical Wiring Guidelines | 32

SRX340 Services Gateway Grounding Specifications | 34

SRX340 Services Gateway Physical Specifications | 34

SRX340 Services Gateway Clearance Requirements for Airflow and Hardware

Maintenance | 35

Rack Requirements for the SRX340 Services Gateway | 36

Cabinet Requirements for the SRX340 Services Gateway | 36

SRX340 Transceiver Specifications and Pinouts | 37

SRX340 Transceiver Support | 37

RJ-45 Connector Pinouts for the SRX340 Services Gateway Ethernet Port | 38

RJ-45 Connector Pinouts for the SRX340 Services Gateway Console Port | 38

Mini-USB Connector Pinouts for the SRX340 Services Gateway Console Port | 39

Initial Installation and Configuration

SRX340 Installation Overview | 42

SRX340 Services Gateway Installation Overview | 42

SRX340 Services Gateway Autoinstallation Overview | 42

Unpacking and Mounting the SRX340 | 44

Unpacking the SRX340 Services Gateway | 44

Verifying Parts Received with the SRX340 Services Gateway | 45

Preparing the SRX340 Services Gateway for Rack-Mount Installation | 46

Installing the SRX340 Services Gateway in a Rack | 47

Connecting the SRX340 to Power | 48

Required Tools and Parts for Grounding the SRX340 Services Gateway | 49

Connecting the SRX340 Services Gateway Grounding Cable | 49

Connecting the SRX340 Services Gateway to an AC Power Supply | 51

Powering On the SRX340 Services Gateway | 52

Powering Off the SRX340 Services Gateway | 52

Connecting the SRX340 to External Devices | 54

Connecting the Dial-Up Modem to the Console Port on the SRX340 Services Gateway | 54

Connecting to the SRX340 Services Gateway CLI Using a Dial-Up Modem | 55

Configuring Junos OS on the SRX340 | 56

SRX340 Services Gateway Software Configuration Overview | 56

Understanding SRX340 Services Gateway Factory-Default Settings | 56

Initial Configuration | 58

Initial Configuration Using J-Web | 58

Initial Configuration Using CLI | 59

Plug and Play | 61

Customize the Configuration Using J-Web | 62

Viewing Factory-Default Settings | 64

Maintaining Components

Maintaining the SRX340 Components | 66

Required Tools and Parts for Maintaining the SRX340 Services Gateway Hardware

Components | 66

Routine Maintenance Procedures for the SRX340 Services Gateway | 66

Maintaining the SRX340 Services Gateway Cooling System Components | 67

Maintaining the SRX340 Services Gateway Power Supply | 67

Replacing Mini-Physical Interface Modules in the SRX340 Services Gateway | 67

Troubleshooting Hardware

Troubleshooting the SRX340 | 70

Troubleshooting Resources for the SRX340 Services Gateway Overview | 70

Troubleshooting Chassis and Interface Alarm Messages on the SRX340 Services Gateway | 70

Troubleshooting the Power System on the SRX340 Services Gateway | 71

Using the RESET CONFIG Button | 72

Changing the RESET CONFIG Button Behavior | 73

Contacting Customer Support and Returning the Chassis or Components

Returning the SRX340 Chassis or Components | 75

Contacting Customer Support | 75

Returning a SRX340 Services Gateway Component to Juniper Networks | 76

Locating the SRX340 Services Gateway Chassis Serial Number and Agency Labels | 76

Locating the SRX340 Services Gateway Mini-Physical Interface Module Serial Number

Label | 77

Listing the SRX340 Services Gateway Component Details with the CLI | 77

Required Tools and Parts for Packing the SRX340 Services Gateway | 78

Packing the SRX340 Services Gateway for Shipment | 78

Packing SRX340 Services Gateway Components for Shipment | 79

Safety and Compliance Information

Definitions of Safety Warning Levels | 82

General Safety Guidelines and Warnings | 85

Restricted Access Warning | 87

Qualified Personnel Warning | 90

Prevention of Electrostatic Discharge Damage | 90

Fire Safety Requirements | 92

Fire Suppression | 92

Fire Suppression Equipment | 92

Laser and LED Safety Guidelines and Warnings | 93

General Laser Safety Guidelines | 93

Class 1 Laser Product Warning | 94

Class 1 LED Product Warning | 95

Laser Beam Warning | 96

Radiation from Open Port Apertures Warning | 97

Maintenance and Operational Safety Guidelines and Warnings | 98

Battery Handling Warning | 99

Jewelry Removal Warning | 100

Lightning Activity Warning | 102

Operating Temperature Warning | 103

Product Disposal Warning | 105

Action to Take After an Electrical Accident | 106

General Electrical Safety Guidelines and Warnings | 106

AC Power Electrical Safety Guidelines | 107

SRX340 Services Gateway Agency Approvals | 108

SRX340 Services Gateway Acoustic Noise Compliance Statements | 109

SRX340 Services Gateway EMC Requirements | 110

Canada | 110

European Community | 110

Israel | 110

Japan | 110

United States | 111

vii

About the Documentation

IN THIS SECTION

Documentation and Release Notes | viii

Using the Examples in This Manual | viii

Documentation Conventions | x

Documentation Feedback | xiii

Requesting Technical Support | xiii

Use this guide to install hardware and perform initial software configuration, routine maintenance, and

troubleshooting for the SRX340 Services Gateway. After completing the installation and basic configuration

procedures covered in this guide, refer to the Junos OS documentation for information about further

software configuration.

Documentation and Release Notes

To obtain the most current version of all Juniper Networks®technical documentation, see the product

documentation page on the Juniper Networks website at https://www.juniper.net/documentation/.

If the information in the latest release notes differs from the information in the documentation, follow the

product Release Notes.

Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts.

These books go beyond the technical documentation to explore the nuances of network architecture,

deployment, and administration. The current list can be viewed at https://www.juniper.net/books.

Using the Examples in This Manual

If you want to use the examples in this manual, you can use the load merge or the load merge relative

command. These commands cause the software to merge the incoming configuration into the current

candidate configuration. The example does not become active until you commit the candidate configuration.

viii

If the example configuration contains the top level of the hierarchy (or multiple hierarchies), the example

isafull example. In this case, use the load merge command.

If the example configuration does not start at the top level of the hierarchy, the example is a snippet. In

this case, use the load merge relative command. These procedures are described in the following sections.

Merging a Full Example

To merge a full example, follow these steps:

1. From the HTML or PDF version of the manual, copy a configuration example into a text file, save the

file with a name, and copy the file to a directory on your routing platform.

For example, copy the following configuration to a file and name the file ex-script.conf. Copy the

ex-script.conf file to the /var/tmp directory on your routing platform.

system {

scripts {

commit {

file ex-script.xsl;

}

interfaces {

fxp0 {

disable;

unit 0 {

family inet {

address 10.0.0.1/24;

}

2. Merge the contents of the file into your routing platform configuration by issuing the load merge

configuration mode command:

[edit]

user@host# load merge /var/tmp/ex-script.conf

load complete

Merging a Snippet

To merge a snippet, follow these steps:

1. From the HTML or PDF version of the manual, copy a configuration snippet into a text file, save the

file with a name, and copy the file to a directory on your routing platform.

For example, copy the following snippet to a file and name the file ex-script-snippet.conf. Copy the

ex-script-snippet.conf file to the /var/tmp directory on your routing platform.

commit {

file ex-script-snippet.xsl; }

2. Move to the hierarchy level that is relevant for this snippet by issuing the following configuration mode

command:

[edit]

user@host# edit system scripts

[edit system scripts]

3. Merge the contents of the file into your routing platform configuration by issuing the load merge

relative configuration mode command:

[edit system scripts]

user@host# load merge relative /var/tmp/ex-script-snippet.conf

load complete

For more information about the load command, see CLI Explorer.

Documentation Conventions

Table 1 on page xi defines notice icons used in this guide.

Autres manuels pour SRX340

Table des matières

Autres manuels Juniper Porte

Juniper

Juniper SRX300 Series Instructions d'installation

Juniper

Juniper SRX5600 Manuel utilisateur

Juniper

Juniper SRX240 Series Manuel utilisateur

Juniper

Juniper SRX 3400 Manuel utilisateur

Juniper

Juniper SRX 1400 SERVICES GATEWAY - Manuel utilisateur

Juniper

Juniper SRX4100 Guide de configuration

Juniper

Juniper SRX 1400 SERVICES GATEWAY - Instructions d'installation

Juniper

Juniper SRX110 Instructions d'installation

Juniper

Juniper SRX1500 Guide de configuration

Juniper

Juniper SRX5400 Instructions d'installation

Juniper

Juniper SRX220 Manuel utilisateur

Juniper

Juniper SG 20 Manuel utilisateur

Juniper

Juniper SRX 210 Manuel utilisateur

Juniper

Juniper SSG140 Manuel utilisateur

Juniper

Juniper SRX300 Series Instructions d'installation

Juniper

Juniper SRX650 Manuel utilisateur

Juniper

Juniper SSG 500M Series Manuel utilisateur

Juniper

Juniper SRX340 Instructions d'installation

Juniper

Juniper SRX110 H2 Instructions d'installation

Juniper

Juniper SRX 5800 Mode d’emploi

Juniper

Juniper SRX 5800 Manuel utilisateur

Juniper

Juniper SRX5600 Instructions d'installation

Juniper

Juniper SSG320M Manuel utilisateur

Juniper

Juniper SRX240 Series Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur