Juniper SRX300 Series Instructions d'installation

SRX300 Services Gateway Hardware Guide

Published

2021-04-21

Juniper Networks, Inc.

1133 Innovation Way

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in

the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks

are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right

to change, modify, transfer, or otherwise revise this publication without notice.

SRX300 Services Gateway Hardware Guide

The information in this document is current as of the date on the title page.

YEAR 2000 NOTICE

Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related

limitations through the year 2038. However, the NTP application is known to have some difficulty in the year 2036.

END USER LICENSE AGREEMENT

The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with)

Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement

(“EULA”) posted at https://support.juniper.net/support/eula/. By downloading, installing or using such software, you

agree to the terms and conditions of that EULA.

Table of Contents

About the Documentation | viii

Documentation and Release Notes | viii

Using the Examples in This Manual | viii

Merging a Full Example | ix

Merging a Snippet | x

Documentation Conventions | x

Documentation Feedback | xiii

Requesting Technical Support | xiii

Self-Help Online Tools and Resources | xiv

Creating a Service Request with JTAC | xiv

Overview

SRX300 Services Gateway Overview | 16

SRX300 Services Gateway Description | 16

Benefits of the SRX300 Services Gateway | 16

SRX300 Chassis | 17

SRX300 Services Gateway Chassis Overview | 17

Understanding the SRX300 Services Gateway Front Panel | 17

Network Port LEDs | 20

Understanding the SRX300 Services Gateway Back Panel | 21

SRX300 Power System | 22

Understanding the SRX300 Services Gateway Power Supply | 22

SRX300 Services Gateway Power Specifications and Requirements | 22

Site Planning, Preparation, and Specifications

Site Preparation Checklist for the SRX300 Services Gateway | 25

SRX300 Site Guidelines and Requirements | 27

General Site Installation Guidelines for the SRX300 Services Gateway | 28

SRX300 Services Gateway Environmental Specifications | 28

SRX300 Services Gateway Electrical Wiring Guidelines | 29

iii

SRX300 Services Gateway Grounding Specifications | 30

SRX300 Services Gateway Physical Specifications | 31

SRX300 Services Gateway Clearance Requirements for Airflow and Hardware

Maintenance | 31

Rack Requirements | 32

Cabinet Requirements | 32

SRX300 Transceiver Specifications and Pinouts | 33

SRX300 Transceiver Support | 34

RJ-45 Connector Pinouts for the SRX300 Services Gateway Ethernet Port | 34

RJ-45 Connector Pinouts for the SRX300 Services Gateway Console Port | 34

Mini-USB Connector Pinouts for the SRX300 Services Gateway Console Port | 35

Initial Installation and Configuration

SRX300 Installation Overview | 38

SRX300 Services Gateway Installation Overview | 38

SRX300 Services Gateway Autoinstallation Overview | 39

Unpacking and Mounting the SRX300 | 40

Unpacking the SRX300 Services Gateway | 40

Verifying Parts Received with the SRX300 Services Gateway | 41

Installing the SRX300 Services Gateway on a Desk | 41

Installing the SRX300 Services Gateway on a Wall | 42

Installing the SRX300 Services Gateway in a Rack | 44

Connecting the SRX300 to Power | 47

Required Tools and Parts for Grounding the SRX300 Services Gateway | 47

Connecting the SRX300 Services Gateway Grounding Cable | 48

Connecting the SRX300 Services Gateway to the Power Supply | 49

Powering On the SRX300 Services Gateway | 50

Powering Off the SRX300 Services Gateway | 51

Connecting the SRX300 to External Devices | 52

Connecting the Dial-Up Modem to the Console Port on the SRX300 Services Gateway | 52

Connecting to the SRX300 Services Gateway CLI Using a Dial-Up Modem | 53

Configuring Junos OS on the SRX300 | 54

SRX300 Services Gateway Factory-Default Settings | 54

How to View Factory-Default Settings | 55

Initial Configuration Using the CLI | 56

Connect to the Serial Console Port | 56

Connect to the Mini-USB Console Port | 57

Configure the SRX300 Using the CLI | 58

Initial Configuration Using J-Web | 59

Configure Using J-Web | 60

Customize the Configuration for Junos OS Release 19.2 | 62

Customize the Configuration for Junos OS Release 15.1X49-D170 | 62

Configure the Device Using ZTP with Juniper Networks Network Service Controller | 64

Maintaining Components

Maintaining the SRX300 Components | 66

Routine Maintenance Procedures for the SRX300 Services Gateway | 66

Maintaining the SRX300 Services Gateway Power Supply | 66

Troubleshooting Hardware

Troubleshooting the SRX300 | 68

Troubleshooting Resources for the SRX300 Services Gateway Overview | 68

Troubleshooting Chassis and Interface Alarm Messages on the SRX300 Services Gateway | 69

Troubleshooting the Power System on the SRX300 Services Gateway | 70

Using the RESET CONFIG Button | 70

Changing the RESET CONFIG Button Behavior | 71

Contacting Customer Support and Returning the Chassis or Components

Returning the SRX300 Chassis or Components | 74

Contacting Customer Support | 74

Returning a SRX300 Services Gateway Component to Juniper Networks | 75

Locating the SRX300 Services Gateway Chassis Serial Number and Agency Labels | 75

Listing the SRX300 Services Gateway Component Details with the CLI | 76

Required Tools and Parts for Packing the SRX300 Services Gateway | 76

Packing the SRX300 Services Gateway for Shipment | 77

Packing SRX300 Services Gateway Components for Shipment | 78

Safety and Compliance Information

Definitions of Safety Warning Levels | 81

General Safety Guidelines and Warnings | 84

Restricted Access Warning | 86

Qualified Personnel Warning | 89

Prevention of Electrostatic Discharge Damage | 89

Fire Safety Requirements | 91

Fire Suppression | 91

Fire Suppression Equipment | 91

Laser and LED Safety Guidelines and Warnings | 92

General Laser Safety Guidelines | 93

Class 1 Laser Product Warning | 94

Class 1 LED Product Warning | 95

Laser Beam Warning | 96

Radiation from Open Port Apertures Warning | 97

Battery-Handling Warning | 98

Lightning Activity Warning | 99

Jewelry Removal Warning | 101

Operating Temperature Warning | 104

Product Disposal Warning | 107

Action to Take After an Electrical Accident | 108

General Electrical Safety Guidelines and Warnings | 108

SRX300 Agency Approvals and Compliance Statements | 109

SRX300 Services Gateway Agency Approvals | 109

SRX300 Services Gateway EMC Requirements | 111

Canada | 111

European Community | 111

Israel | 111

Japan | 111

United States | 112

vii

About the Documentation

IN THIS SECTION

Documentation and Release Notes | viii

Using the Examples in This Manual | viii

Documentation Conventions | x

Documentation Feedback | xiii

Requesting Technical Support | xiii

Use this guide to install hardware and perform initial software configuration, routine maintenance, and

troubleshooting for the SRX300 Services Gateway. After completing the installation and basic configuration

procedures covered in this guide, refer to the Junos OS documentation for information about further

software configuration.

Documentation and Release Notes

To obtain the most current version of all Juniper Networks®technical documentation, see the product

documentation page on the Juniper Networks website at https://www.juniper.net/documentation/.

If the information in the latest release notes differs from the information in the documentation, follow the

product Release Notes.

Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts.

These books go beyond the technical documentation to explore the nuances of network architecture,

deployment, and administration. The current list can be viewed at https://www.juniper.net/books.

Using the Examples in This Manual

If you want to use the examples in this manual, you can use the load merge or the load merge relative

command. These commands cause the software to merge the incoming configuration into the current

candidate configuration. The example does not become active until you commit the candidate configuration.

viii

If the example configuration contains the top level of the hierarchy (or multiple hierarchies), the example

isafull example. In this case, use the load merge command.

If the example configuration does not start at the top level of the hierarchy, the example is a snippet. In

this case, use the load merge relative command. These procedures are described in the following sections.

Merging a Full Example

To merge a full example, follow these steps:

1. From the HTML or PDF version of the manual, copy a configuration example into a text file, save the

file with a name, and copy the file to a directory on your routing platform.

For example, copy the following configuration to a file and name the file ex-script.conf. Copy the

ex-script.conf file to the /var/tmp directory on your routing platform.

system {

scripts {

commit {

file ex-script.xsl;

}

interfaces {

fxp0 {

disable;

unit 0 {

family inet {

address 10.0.0.1/24;

}

2. Merge the contents of the file into your routing platform configuration by issuing the load merge

configuration mode command:

[edit]

user@host# load merge /var/tmp/ex-script.conf

load complete

Merging a Snippet

To merge a snippet, follow these steps:

1. From the HTML or PDF version of the manual, copy a configuration snippet into a text file, save the

file with a name, and copy the file to a directory on your routing platform.

For example, copy the following snippet to a file and name the file ex-script-snippet.conf. Copy the

ex-script-snippet.conf file to the /var/tmp directory on your routing platform.

commit {

file ex-script-snippet.xsl; }

2. Move to the hierarchy level that is relevant for this snippet by issuing the following configuration mode

command:

[edit]

user@host# edit system scripts

[edit system scripts]

3. Merge the contents of the file into your routing platform configuration by issuing the load merge

relative configuration mode command:

[edit system scripts]

user@host# load merge relative /var/tmp/ex-script-snippet.conf

load complete

For more information about the load command, see CLI Explorer.

Documentation Conventions

Table 1 on page xi defines notice icons used in this guide.

Autres manuels pour SRX300 Series

Table des matières

Autres manuels Juniper Porte

Juniper

Juniper SRX 210 Manuel utilisateur

Juniper

Juniper SSG5 Manuel utilisateur

Juniper

Juniper SRX3600 Manuel utilisateur

Juniper

Juniper SRX110 Manuel utilisateur

Juniper

Juniper SRX 1400 SERVICES GATEWAY - Manuel utilisateur

Juniper

Juniper SRX240 Series Manuel utilisateur

Juniper

Juniper SRX 210 Manuel utilisateur

Juniper

Juniper SSG20 Manuel utilisateur

Juniper

Juniper SRX4100 Instructions d'installation

Juniper

Juniper VGW VIRTUAL GATEWAY Manuel utilisateur

Juniper

Juniper SRX5600 Manuel utilisateur

Juniper

Juniper SRX5400 Instructions d'installation

Juniper

Juniper SRX3400 Manuel utilisateur

Juniper

Juniper SRX5400 Manuel utilisateur

Juniper

Juniper SRX240 Series Instructions d'installation

Juniper

Juniper SRX380 Instructions d'installation

Juniper

Juniper SRX4200 Instructions d'installation

Juniper

Juniper SRX5400 Manuel utilisateur

Juniper

Juniper SRX4200 Guide de configuration

Juniper

Juniper SRX550 Manuel utilisateur

Juniper

Juniper SRX3400 Instructions d'installation

Juniper

Juniper SRX3600 Instructions d'installation

Juniper

Juniper SRX300 Series Instructions d'installation

Juniper

Juniper SRX345 Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur