Jbc RHS Manuel utilisateur

RHS

Articulated Hand Rest

for PHSEK Preheater Set

INSTRUCTION MANUAL

www.jbctools.com

Articulated

Hand Rest Arm ................ 1 unit

Height Adj. Flange ......w. 1

unit

Ref. 0023991

Shaft .............................. 1 unit

Ref. 0024007

Base PHSE compatible ......................... 1 unit Headless Screw ....................................... 1 unit

Ref. 0017057

Allen key ..................................................... 1 unit

Ref. 0013609

Manual ......................................................... 1 unit

Ref. 0028766

Packing List

The following items are included:

This manual corresponds to the following reference:

RHS-A

JTT

Articulated Hand

Rest Arm

Height Adjustment Flange

Shaft

Base

Hand Rest

Features

Headless Screw

Positioning Bolds

Printed Corner Guides

Assembly

ESD Connector

(connect to ESD

Common Grounding

Point)

Setting up the Articulated

Hand Rest

Fit the shaft into the base bushing

(1) and tighten the headless screw

(2). Then assemble ﬁrst the height

adjustment ﬂange (3) and ﬁnally the

hand rest arm (4) onto the shaft.

The hand rest arm position should

be as shown in the image. The right

hand rest ist marked at its bottom

side with the letter “R”.

Headless Screw

(at the back)

Shaft

Base

Bushing

Height

Adjustment

Flange

Hand Rest

Arm

Bottom View

Right Hand

Rest

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

JTT

Work Position Adjustment

RHN arm allows adjustment for different positions according to your work needs. The articulated

arm covers all work areas.

Position the arm and tighten the knobs.

The correct hand work posion ist shown in the following images:

Knob

Height Adjustment

According to your work needs the articulated

hand rest allows adjustment for different

heights through the vertical axis.

Slide the arm to the appropriate height (1) and

secure by tightening the knob (2) to guarantee

stability.

Arm

JTT

Preheater Positioning

Positioning Caps

If a fixed preheater position

is not wanted the positioning

bolts can be removed

with a screwdriver.

Corner

Guides

Positioning Bolds

Note: For each preheater size there are different articulated hand rests with different base dimensions

available.

Preheater Articulated Hand Rest Base Dimension

PHNE RHN 310 x 239 mm / 12.20 x 9.41 in

PHSE RHS 410 x 270 mm / 16.14 x 10.63 in

PHBE RHB 550 x 480 mm / 21.65 x 18.90 in

RHS has been designed to work together with PHS

Fit PHSE onto the positioning bolts (1) for a proper alignment. The four corner guides (2) help to place

the heater unit in its position.

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

JTT

In case of using both left and right arms, assemble both as shown in the illustration according to the

letters on the back of the hand rest, to keep the hand supports at the same level. The right hand rest

should be assembled below the left hand rest.

Accessories*

If a second hand rest ist needed, Articulated Left Hand Rest HRL is available. HRL also allows

adjustment for different positions.

HRL

Articulated Left Hand Rest

HRL

Articulated Left Hand Rest

HRR

Articulated Right Hand Rest

Bottom View

Mark for left hand

rest

Mark for right hand

rest

* Not included, sold separately.

JTT

HRR and HRL can be combined with:

RWT Adjustable Rework Arm,

RWS Adjustable Rework Arm for PHSE and

RWB Adjustable Rework Arm for PHBE.

Assemble first the height adjustment flange (1), then the HRR (2) and afterwards the HRL (3). Assemble

the second height adjustment flange (4) and finally the RWT (5).

Compatible JBC Articles*

* Not included, sold separately.

RWT

Ajustable Rework Arm

4 different sizes for PCB Supports are available:

- PHNS Support for PCBs up to 11x7 cm / 4x3”

- PHSS Support for PCBs up to 13x13 cm / 5x5”

- PHBS Support for PCBs up to 36x28 cm / 14x11”

- PHXLS Support for PCBs up to 51x61 cm / 20x24”

HRL

Articulated Left Hand Rest

HRR

Articulated Right Hand RestPlace the preheater set

in the area below the

hot air tool

Heights Adjustmet

Flange (1st)

Heights Adjustmet

Flange (2nd)

JTT

In case of using both left and right arms, assemble both as shown in the illustration according to the

letters on the back of the hand rest, to keep the hand supports at the same level. The right hand rest

should be assembled below the left hand rest.

Accessories*

If a second hand rest ist needed, Articulated Left Hand Rest HRL is available. HRL also allows

adjustment for different positions.

HRL

Articulated Left Hand Rest

HRL

Articulated Left Hand Rest

HRR

Articulated Right Hand Rest

Bottom View

Mark for left hand

rest

Mark for right hand

rest

* Not included, sold separately.

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

Sliding Parts

Maintenance

- Check periodically that RHS is clean,

especially the sliding parts and the shaft.

- Use a damp cloth when cleaning. Alcohol

can only be used to clean the metal parts.

- Replace any defective damaged parts.

Use original JBC spare parts only.

Safety

- Do not use the equipment for any purpose other than PCB rework.

- The temperature of accessible surfaces may remain high after the unit is turned off. Handle with care.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when

working to avoid personal harm.

- Not leave up the arms directly above heat surfaces.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight as well as persons with reduced physical,

sensory or mental capabilities or lacking experience provided that they have been given adequate

supervision or instruction concerning use of the appliance and understand the hazards involved.

Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

It is imperative to follow safety guidelines to prevent electric shock, injury,

fire or explosions.

Shaft

Do not leave HRR over the

preheater when the preheater

is working.

Notes

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

Notes

Autres manuels pour RHS

Table des matières

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur

jbc RHS Manuel utilisateur

Manuels Support et étagère populaires d'autres marques