jbc ALE250 Manuel utilisateur
ALE250
Auto Feed Iron
INSTRUCTION MANUAL
2
Auto Feed Iron ........................................................................................................................................... 1 unit
Includes: C250403 Cartridge
Guide set - Ref. GALE10V-A - Ø 1 mm / 0.039 in
Manual ......................................................................................................................................................... 1 unit
Ref. 0028271
Guide set - Ref. GALE10V-A
C250403
Packing List
The following items are included:
This manual corresponds to the following reference:
- ALE250-A
ø 0,6
3,2x1,5
2,2 x 1
ø 3,8
3
ALE250 Auto Feed Iron works with C250 cartridges. Find the model that best suits your soldering needs
in www.jbctools.com
Compatible Cartridges
Conical Bent Chisel Chisel Bent Bevel
USB-B
Connector
Features and Connections
Auto Feed Iron
Ref. ALE250-AALU Control Unit
Main Switch
Control Screen
Solder Reel Stand
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
AP250
AL250
AL250
SF280
SF250
ALE250
AP250
AL250
AL250
SF280
SF250
ALE250
4
1. Loosen the cartridge screw to release the cartridge. Place the a new one into the auto-feed iron.
Mark
Guide tube
Ref . 0002401 - Ø 0,9 - 1 mm (0.035 - 0.04 in)
Changing cartridge
For a safe cartridge change, unplug the tool or turn the station off before following these guidelines:
2. Align the tip of the cartridge with the solder guide tube.
Important: It is essential to insert the cartridge till the end for a good connection. Use the mark as
reference. Tighten the cartridge screw (1).
3. You must leave a gap of 8 to 10 mm (0.31 - 0.40 in) between the tip and the end of the Guide tube.
4. Loosen the guide screw. Adjust the guide tube and tighten the screw.
8-10 mm
(0.31 - 0.40 in)
2
1
4
3
AP250
AL250
AL250
SF280
SF250
ALE250
5
Accessories
Fume Extractor
Ref. F4468 - 2 m (78.74 ft) lenght.
The fume extractor for AL250 is an easy & safe solution to suck the fume generated at the solder joint.
Before carrying out maintenance, always allow the equipment to cool.
- Before carrying out maintenance, always unplug the stand and the tool.
- Check periodically that the metal parts of the tool and the stand are clean to ensure detection of
the tool when it is in the stand. Use a damp cloth or alcohol.
- Periodically check all cables and tubes connections.
- Replace any defective or damaged pieces. Use original JBC spare parts only. Repairs should only
be performed by a JBC authorized technical service.
Maintenance
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Notes
6
Notes
7
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 30 days of purchase.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0 0 2 82 71-12 2 1
Specifications
ALE
Auto Feed Iron
Ref.: ALE250-A
- Total Net Weight: 148 gr / 0.33 lb
- Dimensions: 35 x 21 x 182 mm / 1.42 x 0.83 x 7.16 in
- Solder Wire Diameter: Ø 1 mm / 0.039 in
- Package Dimensions / Weight: 300 x 125 x 65 mm / 257 g
(L x W x H) 11.81 x 4.92 x 2.56 in / 0.57 lb
Complies with CE standards.
ESD safe
Autres manuels pour ALE250
4
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels jbc Outils électriques
jbc
jbc WS-A Manuel utilisateur
jbc
jbc AP250 Manuel utilisateur
jbc
jbc WS140 Manuel utilisateur
jbc
jbc AP250-A Manuel utilisateur
jbc
jbc DR5500 Manuel utilisateur
jbc
jbc TRA245 Manuel utilisateur
jbc
jbc T210 Series Manuel utilisateur
jbc
jbc AL250 Manuel utilisateur
jbc
jbc ap130-a Manuel utilisateur
jbc
jbc AT420-A Manuel utilisateur
jbc
jbc HT Manuel utilisateur
jbc
jbc 55N PULSMATIC Manuel utilisateur
jbc
jbc ADVANCED DR 5600 Manuel utilisateur
jbc
jbc B-iRON 210 Manuel utilisateur
jbc
jbc pulsmatic Manuel utilisateur
jbc
jbc MS-A Manuel utilisateur
jbc
jbc CV-E Manuel utilisateur
jbc
jbc AM120-A Manuel utilisateur
jbc
jbc PA Manuel utilisateur
jbc
jbc TE-QD Manuel utilisateur
