jbc AT420-A Manuel utilisateur
Adjustable Tweezers
Ref. AT420-A
INSTRUCTION MANUAL
www.jbctools.com
2
Manual .........................................................1 unit
Ref. 0022048
Packing List
The following items should be included:
Adjustable Tweezers ...............................1 unit
Ref. AT420-A
Adjustable Tweezers
Ref. AT420-A
Screwdriver..................................................1unit
Ref. 0023074
www.jbctools.com
www.jbctools.com
3
C420 Cartridges
((Required but not supplied)
Control Unit Stand
Ref. AT-SA
(required but not
supplied)
Adjustable Tweezers
Ref. AT420-A
Features
4
2. Removing
1. Unlocking
Mark
Changing cartridges
Unlock the fixing screws. Place the cartridges in the extractor and pull
the tweezers to remove them.
Use the grooves to position the cartridges.
*Important
It is essential to insert the cartridges as far as the mark for a proper connection.
3. Positioning 4. Inserting
Lift up the Tweezer and press against the
stand to insert the cartridge untill you reach
the mark*.
C420 Cartridge Range
www.jbctools.com
5
*Important
It is essential to insert the cartridges as far as the mark for a proper connection.
5. Rotational Cartridge Alignment
and Loking
1 Slightly turn the wheels to align the cartridges
as required. 2 Lock the fixing screws*.
*Once the alignment has been made, do not forget to fix the cartridges by tightening the fixing
screws. A single turn of the screw is required to get them fixed.
The rear wheel allows the cartritges to be
equally aligned when you close the tweezers.
1
2
6. Vertical Cartridge Alignment
Tweezer Blade
Tweezer QPF
Tweezer Chip
Tweezer
Customized
The AT420-A works with C420 cartridge range. Find the model that best suits your soldering
needs in www.jbctools.com
For Special Cartridges contact with our distributor.
6
Safety
- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded
before use. When unplugging it, hold the plug, not the wire.
- Do not work on electrically live parts.
- The tool should be placed in the stand when not in use in order to activate the sleep mode.
The soldering tip, the metal part of the tool and the stand may still be hot even when the station
is turned off. Handle with care, including when adjusting the stand position.
- Do not leave the appliance unattended when it is on.
- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.
- Avoid the contact of flux with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight and also persons with reduced
physical, sensory or mental capabilities or lack of experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
www.jbctools.com
7
Notes
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 30 days of purchase.
www.jbctools.com
Specifications
002204 8-0719
- Weight: 110 g (0.2 lb)
- Max. power per cartridge: 80W
Complies with CE standards
ESD Safe
Table des matières
Autres manuels jbc Outils électriques
jbc
jbc advanced Series Manuel utilisateur
jbc
jbc B-iRON 210 Manuel utilisateur
jbc
jbc 14S Manuel utilisateur
jbc
jbc JT-QD Manuel utilisateur
jbc
jbc 55N PULSMATIC Manuel utilisateur
jbc
jbc DSS-D Manuel utilisateur
jbc
jbc MSE-A Manuel utilisateur
jbc
jbc NT105 Manuel utilisateur
jbc
jbc DS360 Manuel utilisateur
jbc
jbc AL250 Manuel utilisateur
jbc
jbc HT Manuel utilisateur
jbc
jbc JTSE-QA Manuel utilisateur
jbc
jbc TRA245-B Manuel utilisateur
jbc
jbc NT105-A Manuel utilisateur
jbc
jbc T210 Series Manuel utilisateur
jbc
jbc MD 2960 Manuel utilisateur
jbc
jbc JT-D Series Manuel utilisateur
jbc
jbc DSS Manuel utilisateur
jbc
jbc T210 Series Manuel utilisateur
jbc
jbc JTSE-1UA Manuel utilisateur
