Jbc HDE-2C Manuel utilisateur

Heavy Duty Control Unit

Ref. HDE-UB

English 2

Page

Español 12

Deutsch 22

中文 32

INSTRUCTION MANUAL

www.jbctools.com

Manual ........................... 1 unit

Ref. 0016217

Features

The following items should be included:

HDE

Control Unit ................... 1 unit

Ref. HDE-1UB (120V)

HDE-2UB (230V)

HDE-9UB (100V)

Heavy Duty Control Unit

Ref. HDE-UB

Power Cord ................... 1 unit

Ref. 0010569 (230V)

0013671 (100/120V)

USB-A connector

Tilt the display

for easy reading

2.8” Color TFT screen

Packing List

www.jbctools.com

Connections

Peripherals

Stand

HDE Control Unit

RJ12 connector

for Robot system

USB-B

connector

Equipotential

connection

Power Socket

Compatibility

Select the equipment that best suit your soldering or desoldering needs.

Control

Unit Stand Tool Cartridge

Range MNE-A FSE-A P-005

HDE-B

HD-SD

T470-A

C470

T470-SA

T470-ZA

T470-FA

T470-NA

HDT-SD HT470 -A*

DN-SE T470-NA**

* It works with two HDE Heavy Duty stations in order to manage the cartridges individually

** The MNE Nitrogen Flow Regulator is required.

www.jbctools.com

350ºC

Port

Power

45%

17:14

Selected 350ºC

Port

17:14

Sleep

Tool in the stand

Actual Temp. 180ºC

Delay to hibernation: 29:30 Port

17:14

Hibernation

Actual Temp. 25ºC

T470T470

3. Hibernation

Operation

The JBC Exclusive Heating System

Our revolutionary technology is able to recover tip temperature extremely quickly. It means the user

can work at a lower temperature and improve the quality of soldering. The tip temperature is further

reduced thanks to the Sleep and Hibernation modes which increase the tip life by 5.

1. Work 2. Sleep

When the tool is lifted from the

stand the tip will heat up to the

selected temperature.

When the tool is in the stand,

the temperature falls to the

preset sleep temperature.

After longer periods of

inactivity, the power is cut off

and the tool cools down to

room temperature.

Tools Menu:

· Set temperature limits

· Select temperature levels

Tools Menu:

· Set Sleep temperature

· Set Sleep delay

(from 0 to 9 min or no Sleep)

Tools Menu:

· Set Hibernation delay

(from 0 to 60 min or no

hibernation)

Long time in

the stand

380ºC

Port

Power

45%

Temp. Levels

T470

250 380 400

17:14

USB ﬂash drive is connected.

Station is controlled by a PC.

Station is controlled by a robot.

Station software update.

Press INFO to start the process.

Warning.

Press INFO for failure description.

Error. Press INFO for failure description,

the type of error and how to proceed.

System notifications (Status Bar)Menu Options

Station

Information

Power

indicator

Tool

in use

Work Screen

Status bar

The HDE offers an intuitive user interface which provides quick access to station parameters.

Change

port

Displayed if

temperature

levels are

activated

Station Tools Counters

Reset

GraphicsPeripherals

Press INFO for each parameter description.

www.jbctools.com

Port 1 - T470

450

400

350

300

250

150

100

200

Power Temp

17:14

By pressing Graphics in the main MENU, temperature and power ﬁgures in real time

are displayed for each port. This helps you decide which tip to use to obtain the best

quality solder joints.

Process analysis

Export graphics

Insert a USB flash drive into the USB-A

connector to save your soldering process in

csv format.

Graphics

Temperature

Power (%)

See other

port graphic

Soldering Net

Remotely manage and monitor as many stations as your Windows PC can handle.

Functions:

- Set all the station parameters from your PC.

- Organize groups of stations and set all their parameters at the same time.

- Store specific configurations for later uses.

- Analyze the soldering graphics of the stations on your PC and export them.

1. Download the JBC Manager software and the user manual from www.jbctools.com/manager.html

2. Connect the stations via USB-B connector and the PC will automatically detect them.

3. The notification will be displayed on the station.

JBC

Manager

software

any JBC

station

USB Hub

www.jbctools.com

1. Connect the tool to the station port by means of the CHB-A converter.

2. Connect your Robot system to the Robot connector (RJ12) of the station.

DB9-RJ12 Adapater available only if necessary (Ref. 0013772).

3. Enable the Robot option in the station settings and the notification will be displayed:

4. Set your Robot’s commands according to the Robot Communication Protocol, available on the

website www.jbctools.com/jbcsoftware-menu-115.html

Manage and monitor the station using a Robotic system.

Working with Robots

HDE

Control Unit

Robot

Update the station software

1. Download the JBC Update file from

www.jbctools.com/software.html and save

it on a USB flash drive. Preferably one with no

other files.

JBC

Update file

Converter

Ref. CHB-A

2. Insert the USB flash drive.

The icon is diplayed while updating.

RS-232

connection

Maintenance

Before carrying out maintenance or storage, always allow the equipment to cool.

1. Pull off the fuse holder and remove the fuse.

If necessary use a tool to lever it off.

2. Press the new fuse into the fuse holder and

return to the station.

Fuse holder

Fuse

- Clean the station screen with a glass cleaner

or a damp cloth.

- Maintain tip surface clean and tinned prior to

storage in order to avoid tip oxidation. Rusty

and dirty surfaces reduce heat transfer to the

solder joint.

- Periodically check all cables and tubes.

- Replace a blown fuse as follows:

HDE

Control Unit

Clean

periodically

- Replace any defective or damaged pieces. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

www.jbctools.com

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.

- The power cable must be plugged into approved bases. Make sure that it is properly grounded

before use. When unplugging it, hold the plug, not the wire.

- Do not work on electrically live parts.

- The tool should be placed in the stand when not in use in order to activate the sleep mode.

The soldering tip, the metal part of the tool and the stand may still be hot after the station

is turned off. Handle with care, including when adjusting the stand position.

- Do not leave the appliance unattended when it is on.

- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.

- Avoid flux coming into contact with skin or eyes to prevent irritation

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight as well as persons with reduced

physical, sensory or mental capabilities or lacking experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

Safety

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur

jbc HDE-2C Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques