inveo NANO Manuel utilisateur
User manual
NANO Digital Input POE
Soft >= 1.0
Dear Customer!
INVEO s.c.
ul. Rzemieślnicza 21
43-340 Kozy
tel: +48 33 444 6 87
www.inveo.com.pl
Thank you very much for choosing our product. Please carefully read this user
manual as it contains most appropriate ways of dealing with this device, taking into
account the basic principles of safety and maintenance. Please also keep the user
guide that you can use it during subsequent use.
Manufacturer Liabilit !
The manufacturer is not liable for an damage caused b improper or
incompatible use of this device, as well for an faults to the device resulting
from improper use.
User manual NANO Digital Input 26-04-2018
Page 2 of 27
Contents:
1 PRELIMINARY INFORMATION...................................................................................................................4
2 DEVICE DESCRIPTION...................................................................................................................................5
3 WARRANTY AND LIABILITY OF THE MANUFACTURER...................................................................5
4 SAFETY GUIDELINES.....................................................................................................................................6
4.1 POWER SUPPLY...................................................................................................................................................6
4.2 STORAGE, WORKING ENVIRONMENT AND TRANSPORTATION.........................................................................................6
4.3 INSTALLATION AND USE OF THE MODULE.................................................................................................................6
4.4 UTILISATION OF THE MODULE................................................................................................................................6
5 MODULE DESCRIPTION................................................................................................................................7
5.1 GENERAL FEATURES............................................................................................................................................7
5.2 TECHNICAL SPECIFICATION ...................................................................................................................................7
5.3 MODULE INPUT/OUTPUT TERMINAL DESCRIPTION......................................................................................................8
6 MODULE CONFIGURATION.........................................................................................................................9
6.1 CHANGING THE PC SETTING FOR MODULE CONFIGURATION........................................................................................9
6.2 INPUT READOUT................................................................................................................................................11
6.3 ACCESS CONFIGURATION....................................................................................................................................11
6.4 CONFIGURATION OF THE INPUT CHANNEL..............................................................................................................13
6.5 TCP/IP COMMUNICATION..................................................................................................................................13
6.6 TCP FRAMES FORMAT.......................................................................................................................................14
6.7 SNMP CONFIGURATION....................................................................................................................................15
6.8 MANAGING THE MODULE USING WINDOWS COMMAND LINE SOFTWARE.......................................................................16
6.9 MANAGING THE MODULE USING LINUX COMMAND LINE SOFTWARE...........................................................................18
6.10 MANAGING THE MODULE USING MODBUS TCP..............................................................................................19
6.11 COMMUNICATION VIA THE MQTT INVEO PROTOCOL...........................................................................................19
6.12 COMMUNICATION WITH MODULE USING HTTP....................................................................................................20
6.13 COMMUNICATION PROTOCOL DESCRIPTION...........................................................................................................23
6.14 COMMUNICATION WITH MODULE FROM OUTSIDE NETWORK.....................................................................................24
7 CHEC ING THE IP ADDRESS.....................................................................................................................25
8 DHCP..................................................................................................................................................................25
9 RESTORING FACTORY DEFAULTS..........................................................................................................25
10 FIRMWARE UPDATE..................................................................................................................................26
NOTES..................................................................................................................................................................27
User manual NANO Digital Input 26-04-2018
Page 3 of 27
1 Preliminar information
Before using the module please read the user manual carefull and follow the
instructions contained within!
Description of visual symbols used in this user manual:
This symbol is responsible for reviewing the appropriate place in the
user instructions, warnings and important information. Failure to
follow warnings could cause injury or damage to the module.
Important information and guidelines.
Following this guidelines makes the use of the module easier.
Attention: The appearance of the screen shots shown in this manual may differ
slightly from the actual work with the module. The differences may relate to the size
and font type and size of symbols. There are no differences in the content of the
information.
User manual NANO Digital Input 26-04-2018
Page 4 of 27
2 Device description
The NANO Digital Input device is used to read state of the input through LAN network.
The readout can be done using www website, network protocols ( HTTP get, Modbus TCP,
SNMP, MQTT) TCP frame or software supplied by manufacturer.
3 Warrant and liabilit of the manufacturer
The manufacturer provides a 2-year warranty on the module. The manufacturer also
provides post-warranty service for 10 years from the date of the introducing the module
on the market. The warranty covers all defects in material and workmanship.
The manufacturer undertakes to comply with the contract of guarantee, if the following
conditions are met:
All repairs, alterations, extensions and device calibrations are performed by the
manufacturer or authorized service,
supply network installation meets applicable standards in this regard,
device is operated in accordance with the recommendations outlined in this manual,
device is used as intended.
The manufacturer assumes no responsibility for consequences resulting from improper
installation, improper use of the module, not following this manual and the repairs of the
module by individuals without permission.
This device doesn’t contain serviceable parts. The repairs can be done onl b
manufacturers approved repair service.
User manual NANO Digital Input 26-04-2018
Page 5 of 27
4 Safet guidelines
The module has been constructed using modern electronic components, according to the
latest trends in the global electronics.
In particular, much emphasis was placed on ensuring optimum safety and reliability
of control.
The device has a housing with high quality plastic.
4.1 Power supply
The device is designed to supply 10-24V DC and PoE IEEE 802.3af.
4.2 Storage, working environment and transportation
The module has to be used in closed environments free from fumes and corrosive
atmosphere.
Environmental conditions for storage:
Temperature: -30°C to +60°C,
Relative humidity: <90% (unacceptable condensation)
Atmospheric pressure: 700 – 1060hPa.
Environmental conditions for use:
Temperature: +10°C to + °C,
Relative humidity: 30% to 7 %,
Atmospheric pressure: 700 to 1060hPa.
4.3 Installation and use of the module
The module should be used following the guidelines shown in next part of the
user manual.
4.4 Utilisation of the module
When it becomes necessary to liquidate the device (e.g. after the time of use), please
contact the manufacturer or its representative, who are obliged to respond appropriately,
e.g. collecting the module from the user. You can also ask the companies involved
in utilization and / or liquidation of electrical or computer equipment. Under
no circumstances should you place the device along with other garbage.
User manual NANO Digital Input 26-04-2018
Page 6 of 27
5 Module description
.1 General features
Overall view of the module is shown on the picture below.
Module input can work as a pulse counter
There are several ways to communicate with the module:
•using built in WWW server via any web browser,
•windows / linux command line programs.
•MODBUS TCP protocol,
•SNMP protocol,
•HTTP protocol,
•MQTT Inveo protocol,
•User application – communication protocol available for user
NANO Digital Input module is equipped with LED display which displays actual state of
input: ON or OFF.
.2 Technical specification:
Power supply voltage: 10-24VDC or PoE according to PoE IEEE 802.3af
Power consumption: 1. W
Ethernet 10Mbit
7-segment LED display red
Weight: 60g
Distensions: height: 27 mm; width: 74.6 mm; length: 0.1 mm
User manual NANO Digital Input 26-04-2018
Page 7 of 27
NANO Digital Input
Input:
Input type - NO
Counter max value: 4 294 967 296
Max input frequency: 1 Hz
.3 Module input/output terminal description
Module Nano Digital Input has two connection terminals:
•LAN - LAN connection and PoE IEEE 802.3af power supply
•RESET – switch used to enabling DHCP service, checking the current IP address
and restoring the module to the factory settings.
User manual NANO Digital Input 26-04-2018
Page 8 of 27
•INPUT – binary opto-isolated input
•POWER -power connector. An additional power connector used in the event of a
PoE power failure. Supply voltage 12-24VDC.
6 Module configuration
If using the module for the first time it is needed to configure it as shown below
6.1 Changing the PC setting for module configuration.
After connecting the module to the network there is a need to change the PC setting. In
order to do that navigate to: Start->Control Panel->Network connections.
Then right click on the current network connection and click „Properties”.
The configuration screen as shown below should be visible on the screen:
Choose the „Internet Protocol (TCP/IP)” and press „Properties”:
User manual NANO Digital Input 26-04-2018
Page 9 of 27
TCP/IP example settings
Tick the box „Use the following IP address” and enter:
IP address: 192.168.111.1
Subnet mask: 255.255.255.0
The rest of the setting can be left blank.
Press OK to accept the changes.
Start the web browser and enter the following address into address bar:
192.168.111.15. Then select the "NETWORK" menu
The default user name is „admin” with password „admin00”
There are several fields used to configure the module network settings:
MAC Address – MAC address of the module,
User manual NANO Digital Input 26-04-2018
Page 10 of 27
Autres manuels pour NANO
1
Table des matières
Autres manuels inveo Autre
