inveo NANO Manuel utilisateur
User manual
Nano RFID
Nano RFID PoE
Soft >= 0.37
User manual: Nano RFID / Nano RFID PoE
Page
1 of 24
[ 01]
Dear Customer!
Thank you very much for choosing our product. efore its use, please read these
instructions carefully. Here you find the most appropriate ways of dealing with this
device, the basic principles of safety and maintenance. Please, also keep the user manual
so that you can read it during later use.
Attention!
The manufacturer is not liable for an damage caused b improper use of
the device which differ from its intended purpose, or improper handling, as well
as a fault of driver resulting from improper use.
User manual: Nano RFID / Nano RFID PoE
Page
2 of 24
[ 01]
Contents:
1 PRELIMINARY INFORMATION...................................................................................................................4
2 APPLICATION OF THE DEVICE..................................................................................................................5
3 WARRANTY AND LIABILITY OF THE MANUFACTURER...................................................................5
4 SAFETY GUIDELINES.....................................................................................................................................6
4.1 S
TORAGE
,
WORK
AND
TRANSPORT
CONDITIONS
.........................................................................................................6
4.2 I
NSTALLATION
AND
USE
OF
THE
DEVICE
..................................................................................................................6
4.3 D
ECOMMISSIONING
OF
THE
DEVICE
.........................................................................................................................6
5 CONSTRUCTION OF THE DEVICE..............................................................................................................7
5.1 N
ANO
RFID P
O
E..............................................................................................................................................7
5.2 N
ANO
RFID.....................................................................................................................................................9
6 CONFIGURATION OF THE DEVICE.........................................................................................................11
6.1 C
HANGING
THE
DEVICE
S
IP
ADDRESS
BY
D
ISCOVERER
APPLICATION
.........................................................................11
6.2 C
HANGING
THE
PC
S
SUBNET
ADDRESS
................................................................................................................12
6.3 C
OMMUNICATIONS
PROTOCOLS
AND
ADMINISTRATION
..............................................................................................14
7 THE DEVICE FUNCTIONS...........................................................................................................................15
7.1 C
OMMUNICATION
WITH
THE
READER
....................................................................................................................15
7.2 I
NBUILT
WWW
SITE
............................................................................................................................................15
7.3 I
NTEGRATION
WITH
USER
S
SOFTWARE
...................................................................................................................16
7.4 V
IEWING
THE
READER
STATUS
BY
HTTP GE T...................................................................................................17
7.5 C
ONTROL
BY
HTTP GET
PROTOCOL
.................................................................................................................18
7.6 C
ONTROLLING
BY
HTTP
PROTOCOL
IN
CLIENT
MODE
.............................................................................................19
7.7 M
ODBUS
TCP.................................................................................................................................................21
7.8 SNMP...........................................................................................................................................................22
8 COMMUNICATION WITH THE DEVICE FROM E TERNAL NETWORK.......................................23
9 DHCP..................................................................................................................................................................23
10 RETURN TO THE FACTORY SETTINGS DEFAULT............................................................................23
11 FIRMWARE UPDATE..................................................................................................................................24
User manual: Nano RFID / Nano RFID PoE
Page
3 of 24
[ 01]
1 Preliminar information
Before starting work with the device, read The User manual and follow the
instructions contained therein!
Description of visual symbols used in this user manual:
This symbol is responsible for reviewing the appropriate place in the
user instructions, warnings and important information. Failure to
follow warnings could cause injury or damage to the device
Important information and guidelines
Following this guidelines makes the use of the device easier
Attention: The screenshots in this manual can be dissimilar from actual images at
the time of the device purchase. Due to continuous development of the devices
software, some of the functions may differ from these in the manual. The
manufacturer claims no responsibility for any undesirable effects (misunderstanding)
caused by changes of the software.
User manual: Nano RFID / Nano RFID PoE
Page
4 of 24
[ 01]
2 Application of the device
The Nano RFID device is used to read RFID Unique tags. The device is prepared for
an integration with other systems by way of of Modbus TCP, HTTP client / server, SNMP
protocols.
3 Warrant and liabilit of the manufacturer
The manufacturer provides a 2-year warranty on the device. The manufacturer also
provides post-warranty service for 10 years from the date of the introducing the device
on the market. The warranty covers all defects in material and workmanship.
The manufacturer undertakes to comply with the contract of guarantee, if the following
conditions are met:
all repairs, alterations, extensions and device calibrations are performed by the
manufacturer or authorized service,
supply network installation meets applicable standards in this regard,
the device is operated in accordance with the recommendations outlined in this
manual,
the device is used as intended.
The manufacturer assumes no responsibility for consequences resulting from improper
installation, improper use of the device, not following this manual and the repairs of the
device by individuals without permission.
This device doesn’t contain serviceable parts.
User manual: Nano RFID / Nano RFID PoE
Page
5 of 24
[ 01]
4 Safet guidelines
The device has been designed and built using modern electronic components, according
to the latest trends in the global electronics. In particular, much emphasis was placed on
ensuring optimum safety and reliability of control. The device has a housing with a high-
quality plastic.
4.1 Storage, work and transport conditions
The controller device has to be stored in enclosed rooms which are free of caustic vapors
and substances and also meet the requirements:
•surrounding temperature from -40°C to +85°C,
•humidity from 5 to 95%,
•atmospheric pressure from 700 to 1060hPa
The device working conditions:
•surrounding temperature from -10°C to +60°C,
•relative humidity from 5% to 95%,
•atmospheric pressure from 700 to 1060hPa.
Recommended transport conditions:
•surrounding temperature from -40°C to +85°C,
•humidity from 5 to 95%,
•atmospheric pressure from 700 to 1060hPa.
4.2 Installation and use of the device
The device should be used following the guidelines shown in next part of the
user manual.
4.3 Decommissioning of the device
When it becomes necessary to recycle the device (for instance, to decommission the
device from service), please contact the manufacturer or its representative, who are
obliged to respond, appropriately, i.e. collecting the device from the user. You can also
ask the companies involved in recycling of electrical or computer equipment. Under no
circumstances should you place the device along with other waste material.
User manual: Nano RFID / Nano RFID PoE
Page
6 of 24
[ 01]
5 Construction of the device
5.1 ano RFID PoE
Technical data:
Power supply:
PoE: 33-57V POE IEEE 802.3af,
DC: 12-24VDC (screw terminals 3,5mm),
Power consumption: max 1,5W.
Transponders:
Tag readout standards: UNIQUE ; 125kHz,
Tag reading distance: up to 8cm.
Inputs:
Number of inputs: 1,
Input type: opto-isolator, dry contact (NO) ,
Maximum input voltage: 24V.
Outputs:
Number of outputs: 1,
Output type: relay NO,
Maximum relays current load: 1A @ 30VDC.
LAN:
Ethernet 1x10Mbps, RJ45
Dimensions:
All dimension values are in millimeters.
User manual: Nano RFID / Nano RFID PoE
Page
7 of 24
[ 01]
General view
Indicators and connectors:
The device is equipped with LED two diodes:
•POWER LED - the device power supply status,
•TAG LED - optical indications for read out tags.
The Nano RFID PoE is equipped with screw terminal connectors.
•POWER - power connector. Power supply 10-24VDC or PoE 802.3af,
•INPUT1 – dry contact NO input. The input status is available via the MOD US
TCP or HTTP Get protocol,
•RELAY OUT1 – relay NO output. Switching on/off relay and reading its status are
available via the Modbus TCP or HTTP Get protocol,
User manual: Nano RFID / Nano RFID PoE
Page
8 of 24
[ 01]
•LAN – LAN connection socket,
•RESET – reset button. Its necessary for enable DHCP and restore factory
settings.
5.2 ano RFID
Technical data:
Power supply:
Passive PoE: 12-24VDC,
Power consumption: max 1,5W.
Transponders:
Tag readout standards: UNIQUE ; 125kHz,
Tag reading distance: up to 8cm.
LAN:
Ethernet 1x10Mbps, RJ45
Dimensions:
All dimension values are in millimeters.
User manual: Nano RFID / Nano RFID PoE
Page
9 of 24
[ 01]
General view
Indicators and connectors:
The device is equipped with LED two diodes:
•POWER LED - the device power supply status,
•TAG LED - optical indications for read out tags.
•LAN – LAN connection socket,
•RESET – reset button. Its necessary for enable DH P and restore factory
settings.
User manual: Nano RFID / Nano RFID PoE
Page
10 of 24
[ 01]
Autres manuels pour NANO
1
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels inveo Autre
