Intermec EasyCoder PC4 Manuel utilisateur
Service Manual
EasyCoder PC4
Bar Code Label
Printer
Intermec Technologies Corporation
Corporate Headquarters
6001 36th Ave. W.
Everett, WA 98203
U.S.A.
www.intermec.com
e information contained herein is proprietary and is provided solely for the purpose of allowing
customers to operate and/or service Intermec manufactured equipment and is not to be released,
reproduced, or used for any other purpose without written permission of Intermec.
Information and specifications in this manual are subject to change without notice.
© 2005 by Intermec Technologies Corporation. All Rights Reserved
EasyCoder, EasyLAN, Fingerprint, and LabelShop are registered trademarks of Intermec Tech-
nologies Corp. e word Intermec, the Intermec logo, InterDriver, and PrintSet are trademarks of
Intermec Technologies Corp.
e name Centronics is wholly owned by GENICOM Corporation.
Microsoft is a registered trademark of Microsoft Corporation.
Windows is a trademark of Microsoft Corporation.
roughout this manual, trademarked names may be used. Rather than put a trademark (™) symbol
in every occurrence of a trademarked name, we state that we are using the names only in an editorial
fashion, and to the benefit of the trademark owner, with no intention of infringement.
Intermec EasyCoder PC4—Service Manual iii
Preface
Contents
About is Manual ...............................................................................................................v
Notices and Approvals ..........................................................................................................vi
1 Models and Options 1
1.1 Models............................................................................................................................ 2
1.2 Options ...........................................................................................................................3
1.3 EasyCoder PC4 Specifications ........................................................................................4
1.4 EasyCoder PC4 Measures ...............................................................................................6
2 Main Parts 9
2.1 Taking the Printer Apart ................................................................................................10
2.2 Reassembling the Printer ...............................................................................................10
2.3 Exploded View ..............................................................................................................11
3 Top Cover 13
3.1 Description................................................................................................................... 14
3.2 Tear-Off Plate ................................................................................................................15
4 Print Frame 17
4.1 Description.......................................................... .........................................................18
4.2 LED and Feed Switch ...................................................................................................19
4.3 Top Cover Locks ...........................................................................................................21
4.4 Base Lock Spring Hooks ...............................................................................................21
4.5 Printhead ......................................................................................................................22
4.6 Ribbon End Sensor .......................................................................................................25
4.7 Label Gap Sensor (Emitter) ...........................................................................................27
4.8 Ribbon Feed Mechanism ..............................................................................................28
5 Base Frame 33
5.1 Main Parts..................................................................................................................... 34
5.2 Main Board ...................................................................................................................35
5.3 Platen Roller .................................................................................................................36
5.4 Peel-Off Mechanism ......................................................................................................37
5.5 Motor assy ....................................................................................................................39
5.6 Media Guides ................................................................................................................40
5.7 Base Locks ....................................................................................................................41
5.8 Label Gap/Black Mark Sensors ......................................................................................43
5.9 Media Spindle ...............................................................................................................45
6 Bottom Cover 47
6.1 Bottom Cover ...............................................................................................................48
iv Intermec EasyCoder PC4—Service Manual
Preface
7 Main Board 49
7.1 Description................................................................................................................... 50
7.2 Accessing the Main Board .............................................................................................51
7.3 Connections ..................................................................................................................51
7.4 Test Points .....................................................................................................................52
7.5 Block Diagram ..............................................................................................................54
7.6 Internal Memory ...........................................................................................................55
7.7 Schematics ....................................................................................................................56
8 Power Supply 61
8.1 Description.................................................................................................................... 62
9 Memory Cartridge (option) 63
9.1 Description................................................................................................................... 64
9.2 Memory Sizes ................................................................................................................65
9.3 Schematics ....................................................................................................................66
10
Starting Up 67
10.1 Normal Mode .............................................................................................................68
10.2 Test Mode ...................................................................................................................69
10.3 Dump Mode ...............................................................................................................70
11
Firmware Upgrading 71
11.1 Requirements ..............................................................................................................72
11.2 Step-by Step Instructions ............................................................................................73
12
Troubleshooting 75
12.1 Checklist..................................................................................................................... 76
Intermec EasyCoder PC4—Service Manual v
Preface
About This Manual
is Service Manual is intended to facilitate installation, troubleshooting
and repair of the Intermec EasyCoder PC4 in the version delivered at the
date of publishing. us, all information on the ESim firmware is based on
version 6.xx. e on-going product improvement can be followed in the
Technical Bulletins published at the Intermec Knowledge Center.
is Service Manual is supplemented by the following publications, which
the service technician also should keep easily available in their latest ver-
sions:
• Intermec EasyCoder PC4, Quick Start Guide (multilingual)
• Intermec EasyCoder PC4, User’s Guide
• Intermec EasyCoder PC4, Spare Parts Catalog
• ESim v6.xx, Programmer’s Reference Manual
Please note that the operations described in this manual only should be car-
ried out by skilled and authorized personnel with proper training and full
understanding of written English. Moving parts may cause harm, if incor-
rectly manipulated.
It is assumed that the reader possesses adequate skills in mechanics and
electronics and is familiar with the ESim protocol and its related standard
application programs. It is also assumed that the reader has access to the
standard tools of an electronics workshop.
vi Intermec EasyCoder PC4—Service Manual
Preface
FCC Notice (United States of America)
WARNING
is equipment generates, uses, and can radiate radio frequency energy
and if not installed and used in accordance with the instructions manual,
may interfere with radio communications. It has been tested and found to
comply with the limits for a Class A computing device pursuant to Sub-
part J of Part 15 of FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial envi-
ronment. Operation of this equipment in a residential area is likely to cause
interference in which case the user, at his own expense, will be required to
take the appropriate measures needed to correct the problem.
DOC Notice (Canada)
Canadian Dept. of Communication
REGULATIONS COMPLIANCE
(DOC-A)
is digital apparatus does not exceed the class A limits for radio noise
emissions from a digital apparatus as set out in the radio interference regu-
lations of the Canadian Department of Communication.
Ministère des Communications du Canada
CONFORMITE DE REGLEMENTS
(DOC-A)
Le présent appareil numérique n’émet pas de bruits radio-électriques dépas-
sant les limites applicables aux appareils numériques de classe A prescrites
dans le règlement sur brouillage radioélectrique édicté par le Ministère des
Communications du Canada.
EU Standard EN 55022 (The European Union)
WARNING
is is a Class A ITE product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.
Notices and Approvals
Intermec EasyCoder PC4—Service Manual 1
1 Models and Options
is chapter provides information on the various models of the EasyCoder
PC4 and contains specifications and physical measures.
2 Intermec EasyCoder PC4—Service Manual
Chapter 1—Models and Options
1.1 Models
ere are two main models of the EasyCoder PC4; one dedicated direct
thermal (DT) model and one dual-capable direct thermal/thermal transfer
(TTR) model. Both models are based on a common double clam-shell
mechanical platform and have the same type of electronics, so except from
the fact that the direct thermal model has no transfer ribbon mechanism,
there are very few differences.
Both models are available with two different printheads; one with a density
of 203.2 dots per inch (8 dots per mm) and a maximum print width of 4.1
inches (104 mm), and another with a density of 300 dots per inch (11.81
dots per mm) and a maximum print width of 4.02 inches (102.2 mm).
Since there is no need to open the top cover in the DT model, the top
cover locks are cut off in flush with the bottom of the print frame.
e machine label, which provides information on model, part number,
serial number, etc. is attached to the bottom of the base frame.
e EasyCoder PC4 has a separate power supply unit that delivers 24
VDC to the printer's main board, where it is transformed to the various
voltages required by the printhead, motor, and logics (see Chapter 8.1).
Thermal transfer
mechanism
(omitted in DT model)
Printhead
Top cover locks
(differ in DT and
TTR models)
Print frame
Top cover
Base Frame
Bottom Cover
Intermec EasyCoder PC4—Service Manual 3
Chapter 1—Models and Options
e power supply unit (PSU) accepts 100 to 240 VAC/50 to 60 Hz. e
power supply has a standard 2-pin input voltage socket, so various types of
power cords can be used according to local voltages and standards.
e power supply has a fixed 1.5 m (4.9 ft) long cable that is connected to
the printer’s rear plate.
1.2 Options
e available options for the EasyCoder PC4 are memory cartridges, USB,
serial and parallel interface cables, a keyboard/display unit, a paper cutter,
a battery unit and an assortment of power cords. Refer to the EasyCoder
PC4, Spare Parts Catalog or Spare Parts List for updated information.
4 Intermec EasyCoder PC4—Service Manual
Chapter 1—Models and Options
1.3 EasyCoder PC4 Specifications
Printing
Print Technique ermal Transfer and/or Direct ermal
Printhead Resolution 203.2 dpi (8 dots/mm) or
300 dpi (11.81 dots/mm)
Print Speed (selectable) 30, 40, 50, 75 or 100 mm/sec.
(1.2,1.6, 2, 3 or 4 in/sec.)
Print Width (max) at 203.2 dpi 104 mm (4.1 inches) = 832 dots
Print Width (max) at 300 dpi 102.2 mm (4.02 inches) = 1208 dots
Print Length (min/max) at 203.2 dpi 6.35/472.5 mm (0.25/18.6 inches) Standard (no cartridge)
Print Length (min/max) at 300 dpi 6.35/220.0 mm (0.25/8.66 inches) Standard (no cartridge)
Media Width (min/max) 25.4 to 118 mm (1.00 to 4.65 inches)
Media ickness (min) 0.06 mm (0.003 inches)
Media ickness, rolls (max) 0.15 mm (0.006 inches)
Media ickness, fan-folds (max) 0.17 mm (0.006 inches)
Media Roll Diameter (max) 127 mm (5.0 inches)
Media Roll Core Diameter 25.4 or 38.1 mm (1.0 or 1.5 inches)
Ribbon Width (min/max) 33 to 110 mm (1.33 to 4.33 inches)
Ribbon Roll Diameter, Outer (max) 41 mm (1.6 inches)
Ribbor Roll Core Diameter, Inner 13 mm (0.5 inches)
Print Directions 4
Modes of operation
Tear Off (Straight-through) Yes
Peel Off (Self-strip) Yes
Firmware
Operating System Intermec ESim v6.xx
Fonts 5 resident
Font Magnification Horizontal max 8 times, vertical max 9 times
Built-in Bar Code Symbologies 33
Physical Measures
Dimensions (W × L × H) 230 × 257 × 167 mm
(9.06 × 10.11 × 6.58 inches)
Weight (excluding PSU and media) Approx. 2.3 kg (5 pounds) Depending on model
Ambient Operating Temperature +5°C to +40°C (+41°F to +104°F)
Ambient Storage Temperature -20°C to +50°C (-4°F to +122°F)
Humidity 10 to 90% non-condensing
Electronics
Microprocessor 16-bit 20 MHz (16M of address space)
On-board Flash memory 1024K (774K firmware, 250K available to user)
On-board RAM memory 2048K (576K firmware, 1050K print buffer)
Power Supply Unit Separate unit
Input Voltage 100 to 240 VAC, 50 to 60Hz, 1.9A
Output Voltage 24 VDC, 3.0A
Input Voltage (mobile applications) 23.5 VDC ± 0.5V, 6A peak No PSU connected
Autres manuels pour EasyCoder PC4
5
Table des matières
Autres manuels Intermec Imprimante
Intermec
Intermec EasyCoder PF2i Instructions d'installation
Intermec
Intermec EasyCoder 501 SA Manuel utilisateur
Intermec
Intermec EasyCoder PD41 Manuel utilisateur
Intermec
Intermec EasyCoder PX4i Manuel utilisateur
Intermec
Intermec EasyCoder 401 Manuel de la liste des pièces
Intermec
Intermec PK80 Series Manuel utilisateur
Intermec
Intermec PF8D Manuel utilisateur
Intermec
Intermec ColorCoder V4 Manuel du propriétaire
Intermec
Intermec PB50 Manuel utilisateur
Intermec
Intermec PR2 Manuel utilisateur
Intermec
Intermec 3400 Manuel utilisateur
Intermec
Intermec EasyCoder 601XP Manuel
Intermec
Intermec PB42 Manuel utilisateur
Intermec
Intermec PB31 Manuel utilisateur
Intermec
Intermec EasyCoder C4 Manuel
Intermec
Intermec PW50 Manuel utilisateur
Intermec
Intermec EasyCoder PL4 Manuel utilisateur
Intermec
Intermec EasyCoder PC41 Manuel utilisateur
Intermec
Intermec EasyCoder 101 Manuel
Intermec
Intermec PB42 Manuel utilisateur
